AKAI GX-650D Reel to Reel Tape Machine. Serviced last year by Retroamps, Devon. Fantastic machine. 3 speed 3 3/4, 7 1/2, and 15ips. Had less than 10 hrs use since being serviced and aligned. Very good cosmetic condition with some age related wear to case. Below is an extract taken from the web. The GX-650D is absolutely the more professional version of the GX-630D and might also be the successor of the GX-400D, although it was not available in a 2 Track Stereo version. This set has 3 speeds (3.75, 7.5 and 15 i.p.s.) and a belt driven, dual capstan mechanism. The GX-650D main motor is the servo-controlled, model SCM3-16TW. Both pinch rollers are activated by their own solenoids, there’s another solenoid to pull the tape guides and another one to release the brakes. The tape path is symmetrical. The GX-650D is one of the only sets which has a Hall Effect Sensor near the left reel motor which checks if the left reel table is still in motion. By means of this sensor, a quick change between tape functions can be accomplished. Finally, this 4 track, 2 channel set has an S.O.S. switch and a cue function. The GX-650D uses the same Servo-Controlled Capstan Motor and belt drive system to power two flywheels with dual center capstans at 15 ips, 7.5 ips and 3.75 ips, as in the GX-400D, GX-400D-PRO, GX-400D-ss, and PRO-1000. Behind the reels, the GX-650D has the outer-rotor reel motors later found in the GX-630D. Yet, unlike the other later Akai sets with the exception of the Servo-Control Board, as seen in the GX-400D, the GX-650D has no PC boards in common with any other Akai. GX-650D Specifications Track system: 4-track, 2 channel stereo system Tape speed: 3.75, 7.5, 15 ips. Total Wow and Flutter: Less than 0.055% @ 7.5 ips Frequency response: 30 to 30,000 Hz +/-3 dB @ 15.0 ips (Akai LN tape) 30 to 26,000 Hz +/-3 dB @ 7.5 ips 30 to 20,000 Hz +/-3 dB @ 3.75 ips S/N ratio: Better than 58 dB @ +6 VU FFWD/RWD time: 120 sec. using a 2400 ft. tape Main motor: SCM3-16TW Servo-Controlled Motor Reel motors: Eddy current outer rotor motor; model: 24XO-TD Heads Erase Head: E4-260 Recording head: R4-200 (GX) Playback head: P4-202 (GX) Dimensions: 524 (H) x 442 (W) x 258 (D) mm. Weight: 26.2 kg.

IN VENDITA TESTINE PER REGISTRATORE AKAI GX600, GX630,GX650; REC R4-200, PLAY P4-202 ERASE E4-260, è SABA SH600

IN VENDITA TESTINE PER REGISTRATORE AKAI GX600, GX630,GX650; REC R4-200, PLAY P4-202 ERASE E4-260, è SABA SH600

IN VENDITA TESTINE PER REGISTRATORE AKAI GX600, GX630,GX650; REC R4-200, PLAY P4-202 ERASE E4-260, è SABA SH600

IN VENDITA TESTINE PER REGISTRATORE AKAI GX600, GX630,GX650; REC R4-200, PLAY P4-202 ERASE E4-260, è SABA SH600

Attention: no shipping outside EU Akai Motor Capstan 12 Volt CCW Ersatzteilnummer BM-733650JMotor läuft, Karton mit Lagerspuren / NOS Versand per Hermes oder DHL, bitte nach Kauf angeben/auswählen ! Bidders outside Germany please ask for shipping rates before bidding ! Attention: no shipping outside EU