Bang & Olufsen Beogram RX . B&O High Fidelity Plattenspieler. Turntable record. Automatischer Plattenspieler funktioniert ohne Maken, wie es soll. DER PLATTENSPIELER FUNKTIONIERT AUCH MIT 7 SINGLES SCHALLPLATTEN VOLLAUTOMATISCH EINWANDFREI. Sie knnen zum Hrprobe vorbei kommen oder ich sende auf Ihre Wunsch eine Videoaufnahme der Funktionen. Verkauft wird mit original mmc2 Tonabnehmer aber mit nachgebaute Nadel. Die Nadel ist NEU und nur eine Platte zum Probe bespielt hat. Verkaufe wegen mehrere Plattenspieler im Haushalt. (Zum Verkauf steht auch noch Pro-Jeckt A1 Plattenspieler. Schauen Sie meine weitere Artikel.) Alleine mmc2 Tonabnehmer kostet heutzutage ab 250 bis 500 . Der Plattenspieler befindet sich in einem sauberen Super-Zustand. Keine kratzer. Passende Tonabnehmer: mmc1, mmc2, mmc3, mmc4, mmc5. Da ist Privatverkauf. Dacher keine Garantie, keine Rcknahme. Keine Gewerleistung. Selbstabholung in Dsseldorf bevorzugt. Zahlungart: Paypal-Freunde oder berweisung. Bei PayPal-Standart Zahlung die Gebhren berniemt der Kufer. .... PS. Ich habe positive Erfahrungen mit dem Verpacken und versicherte Versenden von Plattenspielern gehabt. Sie kommen ohne Schaden an. Obwohl ich das natrlich nicht garantieren kann. Ich habe positive Bewertungen der Verpackung. Trotz gute Verpackung, der Versand erfolgt auf eigene Gefahr des Kufers. Selbstabholung bevorzugt.

Bang & Olufsen MMC2 Cartridge/Stylus Newly refurbished Bang & Olufsen MMC2. Refurbished suspension with a Genuine Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire cantilever. Checked on a spectrum analyser, delicate, accurate and precise with that Original B&O in house sound. Tracking perfectly @1g. Buy with confidence, see my feedback it speaks volumes. MMC2 Specifications : Nude multi-radial contact line diamond mounted on a sapphire cantilever Tracking force 1 gram Contact line diamond stylus nude Cantilever - sapphire tube Effective tip mass 0.3 mg Compliance mg/mN 30 Frequency response 20-20.000 Hz +/- 1.5 dB Channel separation 1000>dB 25 Output mV/cm/s RMS 0.6 Cartridge weight 1.6 grams Any questions just get in touch, Id be glad to help.

Bang & Olufsen Beogram RX . B&O High Fidelity Plattenspieler. Turntable record. Automatischer Plattenspieler funktioniert ohne Maken, wie es soll. Sie knnen zum Hrprobe vorbei kommen oder ich sende eine Videoaufnahme auf Ihre Wnsch. Verkauft wird mit original mmc2 Tonabnehmer aber mit nachgebaute Nadel. Die Nadel ist NEU und nur eine Platte zum Probe bespielt hat. Verkaufe wegen mehrere Plattenspieler im Haushalt. (Zum Verkauf steht auch noch Pro-Jeckt A1 Plattenspieler. Schauen Sie meine weitere Artikel.) Alleine mmc2 Tonabnehmer kostet heutzutage ab 250 bis 500 . Der Plattenspieler befindet sich in einem sauberen Super-Zustand. Keine kratzer. Passende Tonabnehmer: mmc1, mmc2, mmc3, mmc4, mmc5. Da ist Privatverkauf. Dacher keine Garantie, keine Rcknahme. Selbstabholung in Dsseldorf bevorzugt. Zahlungart: Paypal-Freunde oder berweisung. Bei PayPal-Standart Zahlung die Gebhren berniemt der Kufe

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Works as direct Replacement for with MMC1Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Works as direct Replacement for with MMC1Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Works as direct Replacement for with MMC1Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

BANG & OLUFSEN B&O Beogram 9500 + MMC2 Tonsystem Plattenspieler / Turntable. Plattenspieler aus Nachlass. Beim anmachen erscheint die 33 auf dem Tonarm , Tonarm bewegt sich nicht. Gerät wird als Defekt angeboten. Da Privatperson jegliche Garantie und Gewährleistung ausgeschlossen.

Bang & Olufsen Beogram RX . B&O High Fidelity Plattenspieler. Turntable. Record. Vollautomatischer Plattenspieler funktioniert ohne Maken, wie es soll. Sie können zum Hrprobe vorbei kommen oder ich sende eine Video auf Ihre Wnsch. Verkauft wird mit original mmc2 Tonabnehmer aber mit nachgebaute Nadel. Die Nadel ist NEU und nur eine Platte zum Probe bespielt hat. Alleine mmc2 Tonabnehmer kostet heutzutage ab 250 bis 500 . Der Plattenspieler befindet sich in einem sauberen Super-Zustand. Keine kratzer. Passende Tonabnehmer: mmc1, mmc2, mmc3, mmc4, mmc5. Da ist Privatverkauf. Dacher keine Garantie, keine Rcknahme.Video Selbstabholung in Dsseldorf bevorzugt. Zahlungart: Paypal-Freunde oder Überweisung. Bei PayPal-Standart Zahlung die Gebühren überniemt der Kufer.

Up for sale here is my prized Bang and Olufsen TX2 turntable with the superb MMC2 stylus This tangential record player is a work of art and superb in its design and operation. Firstly, this is a tangential record player, this means that the stylus moves across the record deck at a 90 degree angle to the record across the whole record. this reduces weight on the record by the stylus as it sits perfectly in groove at all times. In addition, there is a black round weight sensor in the centre of the deck, this records the weight of the record being played and sets up the record player with the correct speed (LP or Single) and sets the record player start position so that the stylus starts in exactly the correct position. There are control buttons on the record deck for moving the stylus to intended tracks on the album. These controls raise and lower the stylus in the selected position and there is also a play command button, The stylus is also moved to the requested start position on the record and can be lowered into the position required. To make this all easier to do Bang and Olufsen, in its design also incorporated a light in the back of the unit that shines across the record highlighting the grooves, making the start of tracks easily identifiable. The record player is mounted on its ground breaking suspension system that removes vibrations and keeps the record player playing at its optimum performant. This item is collection only as to fragile and valuable to post. For more information on this stunning record player please message me or call 07985 484586 I am only selling this item as I have downsized and am lacking space and has had very little use.

Der legendäre Schallplattenspieler von Bang &Olufsen, BeoGram 7000, silber, mit MMC2, rar, selten. Biete einen Plattenspieler aus dem Hause Bang&Olufsen Beogram 7000 inkl. MMC2 Tonabnehmer System. Der Plattenspieler ist optisch wie technisch in einem sehr guten Zustand.Wurde gerade noch in der Werkstatt überholt und geprüft (siehe Rechnung auf Bild). Er hat die üblichen aber sehr geringen Gebrauchsspuren von der Abdeckhaube.Bei Fragen bitte melden.Bitte nur an Selbstabholer da der Schallplattenspieler schon recht fragil und empfindlich ist und ich ihn nicht so gern versenden möchte.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Works as direct Replacement for with MMC1Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Works as direct Replacement for with MMC1Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC2 Cartridge/StylusNewly refurbished Bang & Olufsen MMC2.Works as direct Replacement for with MMC1Refurbished suspension with an original Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire tube cantilever.Tracking perfectly with 1gram vertical tracking forceMMC2 Specifications :Nude multi-radial Contact Line diamond mounted on a sapphire cantileverTracking force 1 gramNude Contact Line diamond stylusCantilever tube - sapphire Effective tip mass 0.3 mgCompliance mg/mN 30Frequency 20-20000 Hz=/-dB 1.5Channel separation 1000>dB 25Output mV/cm/s RMS 0.6Cartridge weight 1.6 grams Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

B&O Beogram 4000 Vinyl Record Turntable with MMC20E Cartridge This one is in good used example with some marks from normal use and storage but definitely nothing at all major and nothing that would affect its performance has recently been checked and tested - all works and sound good (see photos/video) there are some small knocks to the wood surround and the dustcover does have some marks that might be polished out but it does do its one job - protecting the turntable, the turntable is fitted with RCA phonos and separate earth wire and has hade a new drive belt fitted recently, and it comes complete with the B&O MMC 20 E cartridge/stylus, it is fitted with a 2pin EU plug with an adaptor to a standard three pin UK plug. Note: Collecting in person (from North London) is highly recommenced for this item or partway meet, at cost and by prior arraignment. UK delivery or shipping with ebay’s global shipping program also available. If you wish to send your own courier company to collect (or export) there will be a charge of £20 to cover full packing. And now the boring bit: Please pay within two (2) days of the winning the auction to aid a speedy delivery or make contact straight-away to avoid any misunderstanding. Please dont ask for a Buy It Now - this is an auction and it will run until the end. Returns accepted with prior consent and at buyers expense. No post-auction deals or negotiations will be entered into. Thank you for your interest, any questions please ask - Good Luck and Bid to Win! Finally, we seem to be getting more and more time-waster on ebay these days, so apologies but if you are bidding from outside the UK (or EU) and or have a low feedback score, please send an ebay message at the time of bidding to show good intent and avoid your bid/s being cancelled.

Bang and Olufsen MMC2 cartridge. No cantilever or stylus, for spares or repair.

Bang & Olufsen Beogram RX . B&O High Fidelity Plattenspieler. Turntable. Record. Vollautomatischer Plattenspieler funktioniert ohne Maken, wie es soll. Sie können zum Hrprobe vorbei kommen oder ich sende eine Video auf Ihre Wnsch. Verkauft wird mit original mmc2 Tonabnehmer aber mit nachgebaute Nadel. Die Nadel ist NEU und nur eine Platte zum Probe bespielt hat. Alleine mmc2 Tonabnehmer kostet heutzutage ab 250 bis 500 . Der Plattenspieler befindet sich in einem sauberen Super-Zustand. Keine kratzer. Passende Tonabnehmer: mmc1, mmc2, mmc3, mmc4, mmc5. Da ist Privatverkauf. Dacher keine Garantie, keine Rcknahme.Video Selbstabholung in Dsseldorf bevorzugt. Zahlungart: Paypal-Freunde oder Überweisung. Bei PayPal-Standart Zahlung die Gebühren überniemt der Kufer.

Bang & Olufsen MMC2 Cartridge/Stylus Newly refurbished Bang & Olufsen MMC2. Refurbished suspension with a Genuine Bang & Olufsen nude multi-radial contact line diamond mounted on a sapphire cantilever. Checked on a spectrum analyser, delicate, accurate and precise with that Original B&O in house sound. Tracking perfectly @1g. Buy with confidence, see my feedback it speaks volumes. MMC2 Specifications : Nude multi-radial contact line diamond mounted on a sapphire cantilever Tracking force 1 gram Contact line diamond stylus nude Cantilever - sapphire tube Effective tip mass 0.3 mg Compliance mg/mN 30 Frequency response 20-20.000 Hz +/- 1.5 dB Channel separation 1000>dB 25 Output mV/cm/s RMS 0.6 Cartridge weight 1.6 grams Any questions just get in touch, Id be glad to help.

Up for sale here is my prized Bang and Olufsen TX2 turntable with the superb MMC2 stylus This tangential record player is a work of art and superb in its design and operation. Firstly, this is a tangential record player, this means that the stylus moves across the record deck at a 90 degree angle to the record across the whole record. this reduces weight on the record by the stylus as it sits perfectly in groove at all times. In addition, there is a black round weight sensor in the centre of the deck, this records the weight of the record being played and sets up the record player with the correct speed (LP or Single) and sets the record player start position so that the stylus starts in exactly the correct position. There are control buttons on the record deck for moving the stylus to intended tracks on the album. These controls raise and lower the stylus in the selected position and there is also a play command button, The stylus is also moved to the requested start position on the record and can be lowered into the position required. To make this all easier to do Bang and Olufsen, in its design also incorporated a light in the back of the unit that shines across the record highlighting the grooves, making the start of tracks easily identifiable. The record player is mounted on its ground breaking suspension system that removes vibrations and keeps the record player playing at its optimum performant. This item is collection only as to fragile and valuable to post. For more information on this stunning record player please message me or call 07985 484586 I am only selling this item as I have downsized and am lacking space and has had very little use.

Bang & Olufsen Beogram RX . B&O High Fidelity Plattenspieler. Turntable. Record. Vollautomatischer Plattenspieler funktioniert ohne Maken, wie es soll. Sie können zum Hrprobe vorbei kommen oder ich sende eine Video auf Ihre Wnsch. Verkauft wird mit original mmc2 Tonabnehmer aber mit nachgebaute Nadel. Die Nadel ist NEU und nur eine Platte zum Probe bespielt hat. Alleine mmc2 Tonabnehmer kostet heutzutage ab 250 bis 500 . Der Plattenspieler befindet sich in einem sauberen Super-Zustand. Keine kratzer. Passende Tonabnehmer: mmc1, mmc2, mmc3, mmc4, mmc5. Da ist Privatverkauf. Dacher keine Garantie, keine Rcknahme.Video Selbstabholung in Dsseldorf bevorzugt. Zahlungart: Paypal-Freunde oder Überweisung. Bei PayPal-Standart Zahlung die Gebühren überniemt der Kufer.

Bang & Olufsen MMC2 - works as a direct replacement for MMC1 and others. Perfect condition !!! MMC2 Stylus für High End Anwendungen. Perfekte Zustand !!! Please note my - bitte schauen Sie meiner - 100% feedback. Please also mote registered postage will be with the Royal Danish Post and will be free of charge. Insurance can be added. Ensured payment will add a PayPal fee. Bitte auch bemerken dass Versand mit Einschreiben kostenlos ist. Vericherung ist möglich.Versicherte Versand + PayPal Gebühr. MMC2 Specifications - Specifikationen: Tracking force 1 gram Nude Contact Line diamond stylus Cantilever tube - sapphire Effective tip mass 0.3 mg Compliance mg/mN 30 Frequency 20-20000 Hz=/-dB 1.5 Channel separation 1000>dB 25 Output mV/cm/s RMS 0.6 Cartridge weight 1.6 grams Normal 0 21 false false false DA X-NONE X-NONE