Please see all photos carefully for the best idea of their condition as part of the description Bowers & Wilkins CDM2 Speakers B&W CDM2 Specification System type2-wayEnclosure typeBass-reflexFrequency response ± 3dB70 - 20000 HzNominal impedance8 OhmAmplifier Requirements30 - 120 WSensitivity (2.83V/1m)87 dBTweeter25 mm (1 in.) alloy domeWoofer165 mm (6.5 in.) Kevlar coneDimensions (H x W x D)316 x 220 x 242 mm / 12.44 x 8.66 x 9.53 in.Weight7 kg / 15.4 lbs. In full working order - good condition Please study my pictures for exactly what you will Buy/Win. It will be very well packaged using lots of bubble wrap and double boxed for extra protection and sent signed for delivery.

2 Lautsprecher von B&W, H-1m- B- 22cm - T-31,5 cm, Farbe-Braun ,Model-CDM (TM) 9NT. Keine Mängel,Neue Zimmergestaltung ,daher passen die Lautsprecher nicht mehr ins Bild,

These B&W CDM-1 Special Edition stereo speakers are a must-have for any audio enthusiast. With a sleek black design, these rectangular shaped speakers offer a 2.0 channel system configuration and come equipped with banana jack audio inputs. The speakers have a powerful RMS output of 120W and are perfect for wired connectivity. The brand B&W is well-known for producing high-quality audio equipment, making this a great addition to any home audio setup. The front right and left speakers are in great working condition and have been used. Their model number is B&W CDM-1 Special Edition. These speakers are perfect for creating an immersive audio experience for movies, music or gaming. They are a great addition for anyone looking to upgrade their home audio system. They have a few marks on the boxes in the corners (as seen in pictures). Both play great.

2 x B&W Bowers Wilkins CDM 7 Generic Replacement Tweeter Speaker Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins CDM 7 loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot straight into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

These B&W CDM-1 Special Edition stereo speakers are a must-have for any audio enthusiast. With a sleek black design, these rectangular shaped speakers offer a 2.0 channel system configuration and come equipped with banana jack audio inputs. The speakers have a powerful RMS output of 120W and are perfect for wired connectivity. The brand B&W is well-known for producing high-quality audio equipment, making this a great addition to any home audio setup. The front right and left speakers are in great working condition and have been used. Their model number is B&W CDM-1 Special Edition. These speakers are perfect for creating an immersive audio experience for movies, music or gaming. They are a great addition for anyone looking to upgrade their home audio system. They have a few marks on the boxes in the corners (as seen in pictures). Both play great.

B&W Bowers and Wilkins CDM 2 SE Speakers ( PAIR ). Really beautiful looking and sounding pair of speakers. Easily sounds as good as my Klipsch towers. Only flaw is a mar in the laminate (pictured).

B&W CDM 1 Special Edition Speakers Pair Consumer Electronics Serial Number 2305J DescriptionB&W CDM1 Special EditionIt is also sold in Japan in parallel, so if you want to buy it, please hurry up! All my products are 100 % Authentic Product. PaymentPlease make the payment within 5 days after the end of auction. ShippingThe product will be sent from Japan. Please be assured that we package each item carefully without causing damage. Terms of SaleIf you would like to know more about this item, please contact me before bidding.Items will be sent out within 7 business days after the payment received.When there is a different problem from the indicated contents, please let me know about it within two weeks. We accept returns only if items did not match the description. Buyer pays return shipping. About UsReturn is accepted if only the item is different from item s description.Thank you very much for visiting our store!!! International Buyers - Please Note: - Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer ? s responsibility. - Please check with your country s customs office to determine what these additional costs will be prior to bidding/buying. - These charges are normally collected by the delivering freight ( shipping ) company or when you pick the item up - do not confuse them for additional shipping charges. - We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

I am a B&W, Bowers & Wilkins Hi-Fi Audio Consultant for over 40-years. ZC12459 .... are all the same part inside.ZZ11266 .... are all the same part inside.ZC12092 .... are all the same part inside. What you will receive: Bowers & Wilkins NAUTILUS Tweeter ZZ14259. * Used: Repaired, Dome Pushed Out Professionally by a B&W Hi-Fi Audio technician. In excellent working order. Your Box will be Labeled: ZC12459, but is compatible with all of the speakers below: Bowers & Wilkins NAUTILUS Tweeter ZC12459 for: ZC12459 .... are all the same part inside.ZZ11266 .... are all the same part inside.ZC12092 .... are all the same part inside. B&W N805B&W N804B&W N803B&W N802B&W N801B&W N801B&W NHTM1B&W NHTM2 B&W HTM1B&W HTM2B&W CDM-CNTB&W CDM-1NTB&W CDM-7NTB&W CDM-9NT Shipping & Handling, and Conditions: * Ships only to the 48-states. * No International Sales. * Pay with PayPal Only, must have a Confirmed/ Verified shipping address with PayPal. * Cost of Shipping: $10.00 ( to the 48-states). * All sales are final, No Refunds. Exclude shipping locationsExclude specific locations (regions, countries, PO boxes) that you dont want to ship to. To save time and list faster, go to My eBay Site Preferences and select the specific locations you want to exclude on allyour listings. Learn moreExcluded locations:Alaska/Hawaii, US Protectorates, APO/FPO, Africa, Asia, Central America and Caribbean, Europe, Middle East, Oceania, Southeast Asia, South America, PO Box