Beschreibung
Open Box, Never Used: Emotiva XPA Gen 3 Modular Power Amplifier – Ideal for Home Theater Description: Up for sale is an open-box, never-used Emotiva XPA Gen 3 Modular Power Amplifier. I originally purchased this high-end amplifier for a home theater setup that never came to fruition. The box has been opened only to inspect the contents, but rest assured, the unit has never been used or even powered on. Features: •Modular Design: Easily upgradeable to fit your evolving audio needs. •High Power Output: Capable of powering even the most demanding speakers. •Audiophile Quality: Engineered for clear, high-fidelity sound. •Advanced Protection Circuitry: Ensures safe, reliable operation. What’s Included: •Emotiva XPA Gen 3 Modular Power Amplifier •Power Cord •User Manual •Remote Control •Warranty Card Although the box has been opened, all original accessories, documentation, and warranty card are included. Essentially, you’re getting a like-new unit without the like-new price tag. The item will be securely packaged and shipped promptly upon receipt of payment. Please feel free to contact me with any questions or concerns you may have. Thank you for viewing my listing! Circuit Topology The XPA-3 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection. The XPA-3 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS). Audio Specifications The XPA-3 Gen3 features three of our High-Powered Single Channel Modules. Audio Specifications (Three High-Powered Single Channel Modules): Power Output: 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven. 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven. 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven. 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven. 275 watts RMS/channel; THD<0.1%; 8 Ohms; ALL THREE channels driven. Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB). Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB. THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms. Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted). > 91 dB; ref 1 watt; unbalanced input (A-weighted). Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads). Damping Factor (8 Ohm load): > 500. Input Sensitivity (for rated power; 8 Ohm load): 1.5 V. Gain: 29 dB. Maximum Power Consumption: 1,400 watts. Note: The values shown refer to the amount of power the amplifier would consume while playing test tones continuously, on all channels, at full power, into a load bank. Therefore they are not at all characteristic of what you would expect when playing music or the sound track from a movie. Normal audio signals are dynamic, so the amount of power they require from second to second varies widely, and the average is far lower than this. With normal content, even playing very loudly, one of our amplifiers will consume far less power than indicated in the chart, so these values should not be considered to be a circuit requirement for normal operation. Input Impedance: 33 kOhms (balanced). 23.5 kOhms (unbalanced). Input And Output Connections Input Connections (High-Powered Single Channel Modules): Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable. Input Connections (Stereo Modules): 2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable. Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts. Trigger: Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 120 mA. Power Requirements Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected). Front Panel Controls and Indicators Standby: push button (halo ring changes color to indicate Standby or On). Status LEDs: one per channel; blue. Status LEDs change to red to indicate a fault condition. Rear Panel Controls AC Power switch: rocker switch (switches AC main power). Status LEDs switch: disables front panel Status LEDs and dims Standby button halo. Input selector switches (one per channel): metal toggle switches; select between balanced and unbalanced inputs. Circuit Breaker: press button to reset circuit breaker. Protection The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. Mechanical Dimensions: 17” wide x 8” high x 19” deep (unboxed; including feet). 17” wide x 7” high x 19” deep (unboxed; without feet). 24-1/2” wide x 12” high x 24-3/4” deep (boxed). Weight: 39 lbs (unboxed). 44 lbs (boxed).
| 
2 Kanal Endstufe von Emotiva, sehr guter Zustand. Umschaltbare symetrische/unsymetrische Eingnge. Brckbar. Automatisches Netzteil. Verkauf von Privat, keine Garantie, Gewhrleistung oder Rcknahme. Nur an Selbstabholer in 53773 Hennef. Beachten Sie bitte auch meine weitere Auktion Emotiva XPA 5.
Livesuche