Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

This auction is for an upgraded legendary Jelco SA-750D Tonearm in black. The tonearm is branded as ISOkinetik Silver Melody and is actually a black Jelco SA-750D that has been upgraded with silver internal wiring. The tonearm has been fitted with a magnesium and rosewood headshell with silver cartridge leads and gold-plated connectors. It really is an amazing high-quality arm that will help you get the very best sound from your cartridge. I will be including the original headshell, which is useful when swapping cartridges, a spare arm clip, Allan key, cartridge spacer and screws (see photos). The arm is also supplied with a TVA Corvette Silver tonearm cable, terminated in RCA phono plugs. I am sending this with free UK postage. Thank you for your interest!

A variant of a Jelco SA-250ST Tonearm with a detachable headshell. I believe these where fitted to AR turntables from America. Bearings are good as is the arm lift lower and anti-skate. It uses a smaller locking collar that usual. Linn pattern but with a smaller diameter and a rubber gasket under the collar.

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Jelco SA-750E S-Shaped 10” Tonearm extra weight /box. Great working tonearm, no cable and no cartridge. This was from the Jim Fosgate collection.

JELCO SA-750LB 12, neu, nie montiert, ohne Tonabnehmer, Serien-Nr: S120409 n.b.: Mein Neupreis ist geschtzt. Die abgebildete VPI Tonarmbasis wird nicht mitgeliefert. Sie diente nur zur Erstellung der Bilder. Beschreibung Kardanisch gelagerter Stereo-Tonarm Der Jelco SA-750L ist die 12-Zoll-Version des beliebten SA-750-Tonarms Der Arm verfgt ber eine einstellbare Armhhe, Flssigkeitsdmpfung und eine abnehmbare Headshell Spezifikationen Effektive Lnge: 305 mm berhang: 15 mm Versatzwinkel: 19 Grad Montageabstand: 290 mm Montagemuster: Linn Vertikale Reibung: 20 mg Seitliche Reibung: 20 mg Patronengewichtsbereich: 4 bis 12 g (1222 g mit schwerem Gegengewicht) Armhhenverstellung: 38 bis 60 mm

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *