Beschreibung
McIntosh MC-7270 Amplifier 270w x2 w/factory box - Best Amp its time. The glass... the big blue meters... the sound! Manufactured from 1985 - 1991, this thing is a beast in every sense of the word! Serviced at Audio Classics in New York in April of 2021, this unit is in top operating shape having been calibrated, cleaned, and tested. A receipt from Audio Classics with scope of work and test results will be provided. The amp has a reputation for being rated conservatively and according to the bench test, this particular amp produces 340 watts per channel before clipping. It sounds amazing! Reason for selling is to upgrade to a newer, hybrid tube setup... I know, its an addiction and there should be a 12 step program! I purchased this amp about 5 years ago from the grandson of the original owner. The glass front panel was replaced with a genuine McIntosh panel and is pristine! It does have a couple minor scratches on top and left side that were present before I purchased. None of which takes away from this stunning piece of equipment. I suspect someone struggled with the 82 pound weight when attempting to move it. Please look at the pictures and feel free to ask questions. I want the buyer to be totally happy with this unit. I am also selling a C45 preamp in another auction. This amp will ship in a genuine MC7270 box fastened to a plywood base for safe travel. The boxes McIntosh uses are a feat of engineering in and of themselves and I would caution anyone buying one of these units online to not purchase a heavy piece like this without proper shipping containers. Further, this is a USA model and not a 100v Japan model. Please be aware of the difference. Here is some information on this amp from McIntosh: Specifications from McIntosh: PERFORMANCE GUARANTEE Performance Limits are the maximum deviation from perfection permitted for a Mclntosh instrument. We promise you that when you purchase a new MC 7270 from a Mclntosh franchised dealer, it will be capable of or can be made capable of performance at or exceeding these limits or you can return the unit and get your money back. Mclntosh is the only manufacturer that makes this statement. PERFORMANCE Mclntosh audio power ratings are in accordance with the Federal Trade Commission Regulation of November 4, 1974 concerning power output claims for amplifiers uséd in home entertainment products. POWER OUTPUT STEREO 270 watts minimum sine wave continuous average power output, per channel, both channels operating into 1 ohm, 2 ohms, 4 ohms, or 8 ohms load impedance, which is: 16.4 volts RMS across 1 ohm 23.2 volts RMS across 2 ohms 32.9 volts RMS across 4 ohms 46.5 volts RMS across 8 ohms MONO-BRIDGE 540 watts minimum sine wave continuous average power output into 2 ohms, 4 ohms, 8 ohms, or 16 ohms load impedance, which is: 32.9 volts RMS across 2 ohms 46.5 volts RMS across 4 ohms 65.7 volts RMS across 8 ohms 93.0 volts RMS across 16 ohms OUTPUT LOAD IMPEDANCE STEREO 1 ohm, 2 ohms, 4 ohms, and 8 ohms; separate terminals are provided for each output. MONO-BRIDGED 2 ohms, 4 ohms, 8 ohms, or 16 ohms, balanced to ground. RATED POWER BAND 20 Hz to 20,000 Hz TOTAL HARMONIC DISTORTION STEREO 0.02% maximum harmonic distortion at any power level from 250 milliwatts to 270 watts per channel from 20 Hz to 20,000 Hz, both channels operating. MONO 0.02% maximum harmonic distortion at any power level from 250 milliwatts to 540 watts from 20 Hz to 20,000 Hz. INTERMODULATION DISTORTION STEREO 0.02% maximum if instantaneous peak power output is 540 watts or less per channel with both channels operating for any combination of frequencies, 20 Hz to 20,000 Hz, MONO 0.02% maximum if instantaneous peak power output is 1080 watts or less for any combination of frequencies, 20 Hz to 20,000 Hz. FREQUENCY RESPONSE (AT ONE WATT OUTPUT) 20 Hz to 20,000 Hz +0 -0.25 dB. 10 Hz to 100,00 Hz +0 - 2 dB. NOISE AND HUM 100 dB below rated output. RATINGS DAMPING FACTOR Greater than 30 INPUT IMPEDANCE 20,000 ohms. INPUT SENSITIVITY Switchable: 0.75 volt or 2.5 volts-level control provided for higher input voltages. POWER GUARD Clipping is prevented and THD does not exceed 2% with up to 20 dB overdrive a 1 kHz. GENERAL INFORMATION POWER REQUIREMENTS 120 volts 50/60 Hz; 13 amps. SEMICONDUCTOR COMPLEMENT 79 silicon transistors 31 silicon rectifiers and diodes 7 integrated circuits MECHANICAL INFORMATION SIZE 16 3/16 inches wide (41.1 cm) by 7 1/8 inches high (18.1 cm) by 14 1/2 inches deep (36.8 cm), including connectors. Knob clearance required is 1 1/4 inches (3.2 cm) in front of mounting panel. FINISH The front panel is a combination of glass and black anodized aluminum. The chassis is black. WEIGHT 82 pounds (37.2 kg) net, 96 pounds (43.5 kg) in shipping carton.
| 
Livesuche