Monster Cable M1.2S - 15ft L/R + 10ft Center - Original Boxes - FREE FedEx Ground UL CL3-RatedPre-terminated with Monster Lock Master Banana PlugsIdeal for home theater systemsMultiTwist construction provides enhanced sonic performance and superior noise rejection throughout the audio bandwidthPEX Dielectric for improved signal transfer and enhanced reproduction of harmonic structure and inner detailMagnetic Flux Tube technology in each conductor controls distortion and produces maximum bass response and more natural soundDeep bass, extended high frequencies, wide sound stage, and precise imaging Banana Plugs all around. These can be swapped out for pins or spades from Monster. Look at the photos and judge for yourselves. Ive been the only owner, and I DO NOT abuse my audio gear. Theyre great cables - I simply dont need them any longer. Priced to be BOUGHT, not to be watched! Ill ship them straight to your door via FREE FedEx Ground, insured of course.

Monster tonearm installation cable for turntables with a fixed phono cable. 1.2m. Solid core cable with foil and braid screen and nitrogen injected dielectric to reduce density and thus improve signal quality. The other end is cut, so you can alter the length as required during installation. Most cables of this type for installation are sold with a braid shield only - no foil, which risks noise being induced into the delicate signals from the cartridge. This Monster cable has both foil and braid screen, giving 100% coverage and low impedance. • Left and Right terminated with gold plated Monster Phono Plugs • Ground lead terminated with spade at one end Background to design For a turntable to phonostage a COAXIAL cable is best with a SINGLE core and DOUBLE screening, with both a foil and braid.This is because the output from the cartridge is at an extremely low signal level compared to other interconnect cables;· • A balanced cable with XLR’s - 4Volts· • A Line level signal e.g. CD to Preamp - 2Volts· • Moving Magnet 5mV or 0.005V - one four hundredth of the size of line level • Moving Coil typically 0.2mV or 0.0002V a ten thousandth of the size of line level Needless to say, cables designed for XLR studio cables or Line level cables do not work well for these tiny signals.In this circumstance SHIELDING, and quality of the conductor and dilectric are the most important design parameters. Single core coaxial cable offers the lowest capacitance and in this case 2 layers of shielding, with silver plated high purity copper conductor and braid Mylar / aluminium foil shield with polyethylene dilectric. This is quite a significant step up over the manufacturers supplied cable, which will have lower quality Copper with no silver plating and they usually use PVC dielectric.

Profigold tonearm installation cable for turntables with a fixed phono cable. 1.2m. This length gives approx 75pF capacitance ideal for a Moving Magnet cartridge. Assembled in the UK. OFC Copper conductor with foil and braid screen. Fitted with Neutrik phono plugs at one end, the other end is cut, with a new piece of heat shrink, for the braid, so you can alter the length as required during installation into a turntable or arm. Most cables of this type for installation are sold with a braid shield only - no foil, which risks noise being induced into the delicate signals from the cartridge. This Monster cable has both foil and braid screen, giving 100% coverage and low impedance. • Left and Right terminated with gold plated Neutrik Phono Plugs • Ground lead terminated with spade at one end Background to design For a turntable to phonostage a COAXIAL cable is best with a SINGLE core and DOUBLE screening, with both a foil and braid.This is because the output from the cartridge is at an extremely low signal level compared to other interconnect cables;· • A balanced cable with XLR’s - 4Volts· • A Line level signal e.g. CD to Preamp - 2Volts· • Moving Magnet 5mV or 0.005V - one four hundredth of the size of line level • Moving Coil typically 0.2mV or 0.0002V a ten thousandth of the size of line level Needless to say, cables designed for XLR studio cables or Line level cables do not work well for these tiny signals.In this circumstance SHIELDING, and quality of the conductor and dilectric are the most important design parameters. Single core coaxial cable offers the lowest capacitance and in this case 2 layers of shielding, with silver plated high purity copper conductor and braid Mylar / aluminium foil shield with polyethylene dilectric. This is quite a significant step up over the manufacturers supplied cable, which will have lower quality Copper with no silver plating and they usually use PVC dielectric.

Monster tonearm installation cable for turntables with a fixed phono cable. 1.25m.  Solid core cable with foil and braid screen and nitrogen injected dielectric to reduce density and thus improve signal quality. The other end is cut, with a new piece of heat shrink, for the braid, so you can alter the length as required during installation. Most cables of this type for installation are sold with a braid shield only - no foil, which risks noise being induced into the delicate signals from the cartridge. This Monster cable has both foil and braid screen, giving 100% coverage and low impedance.  • Left and Right terminated with gold plated Monster Phono Plugs • Ground lead terminated with spade at one end Background to design For a turntable to phonostage a COAXIAL cable is best with a SINGLE core and DOUBLE screening, with both a foil and braid.This is because the output from the cartridge is at an extremely low signal level compared to other interconnect cables;·       • A balanced cable with XLR’s - 4Volts·       • A Line level signal e.g. CD to Preamp - 2Volts·       • Moving Magnet 5mV or 0.005V - one four hundredth of the size of line level       • Moving Coil typically 0.2mV or 0.0002V a ten thousandth of the size of line level  Needless to say, cables designed for XLR studio cables or Line level cables do not work well for these tiny signals.In this circumstance SHIELDING, and quality of the conductor and dilectric are the most important design parameters.  Single core coaxial cable offers the lowest capacitance and in this case 2 layers of shielding, with silver plated high purity copper conductor and braid Mylar / aluminium foil shield with polyethylene dilectric. This is quite a significant step up over the manufacturers supplied cable, which will have lower quality Copper with no silver plating and they usually use PVC dielectric.

Monster Cable M1.2S - 15ft L/R + 10ft Center - Original Boxes - FREE FedEx Ground UL CL3-RatedPre-terminated with Monster Lock Master Banana PlugsIdeal for home theater systemsMultiTwist construction provides enhanced sonic performance and superior noise rejection throughout the audio bandwidthPEX Dielectric for improved signal transfer and enhanced reproduction of harmonic structure and inner detailMagnetic Flux Tube technology in each conductor controls distortion and produces maximum bass response and more natural soundDeep bass, extended high frequencies, wide sound stage, and precise imaging Banana Plugs all around. These can be swapped out for pins or spades from Monster. Look at the photos and judge for yourselves. Ive been the only owner, and I DO NOT abuse my audio gear. Theyre great cables - I simply dont need them any longer. Priced to be BOUGHT, not to be watched! Ill ship them straight to your door via FREE FedEx Ground, insured of course.

Monster 8ft HDMI Cable 4k Ultra HD Brand New in original unopened packaging (See Pictures) The Best Way to Connect Your Laptop and More to Your Home Theater All-in-one digital cable for 1080p high definition video and lossless digital audio. Independently verified advanced high speed data transfer rate of 11.2 Gbps. Supports 12- bit Deep Color and 60Hz screen refresh rate. Supports Dolby and DTS HD 5.1/7.1 uncompressed surround sound. Low-loss nitrogen gas-injected dielectric delivers maximum signal strength even over longer runs. Heavy-duty triple-layer shielding rejects electrical interference. Large-gauge copper conductors for reduced resistance and better signal transfer. Ultra-flexible Duraflex jacket for easy routing and installation in tight spaces.

The item comes in the original case and comes with original Banana plugs. Im selling them because I have my wiring in-wall now, but the item works great. (I set my shipping to parcel select which would take 2 to 9 business days, but it keeps placing it on 3 day shipping and it wont let me change it)

Monster Cable M1.2S - 15ft L/R + 10ft Center - Original Boxes - FREE FedEx Ground UL CL3-RatedPre-terminated with Monster Lock Master Banana PlugsIdeal for home theater systemsMultiTwist construction provides enhanced sonic performance and superior noise rejection throughout the audio bandwidthPEX Dielectric for improved signal transfer and enhanced reproduction of harmonic structure and inner detailMagnetic Flux Tube technology in each conductor controls distortion and produces maximum bass response and more natural soundDeep bass, extended high frequencies, wide sound stage, and precise imaging Banana Plugs all around. These can be swapped out for pins or spades from Monster. Look at the photos and judge for yourselves. Ive been the only owner, and I DO NOT abuse my audio gear. Theyre great cables - I simply dont need them any longer. Priced to be BOUGHT, not to be watched! Ill ship them straight to your door via FREE FedEx Ground, insured of course.

Monster Cable M1.2S - 15ft L/R + 10ft Center - Original Boxes - FREE FedEx Ground UL CL3-RatedPre-terminated with Monster Lock Master Banana PlugsIdeal for home theater systemsMultiTwist construction provides enhanced sonic performance and superior noise rejection throughout the audio bandwidthPEX Dielectric for improved signal transfer and enhanced reproduction of harmonic structure and inner detailMagnetic Flux Tube technology in each conductor controls distortion and produces maximum bass response and more natural soundDeep bass, extended high frequencies, wide sound stage, and precise imaging Banana Plugs all around. These can be swapped out for pins or spades from Monster. Look at the photos and judge for yourselves. Ive been the only owner, and I DO NOT abuse my audio gear. Theyre great cables - I simply dont need them any longer. Priced to be BOUGHT, not to be watched! Ill ship them straight to your door via FREE FedEx Ground, insured of course.

Monster Cable M1.2S - 15ft L/R + 10ft Center - Original Boxes - FREE FedEx Ground UL CL3-RatedPre-terminated with Monster Lock Master Banana PlugsIdeal for home theater systemsMultiTwist construction provides enhanced sonic performance and superior noise rejection throughout the audio bandwidthPEX Dielectric for improved signal transfer and enhanced reproduction of harmonic structure and inner detailMagnetic Flux Tube technology in each conductor controls distortion and produces maximum bass response and more natural soundDeep bass, extended high frequencies, wide sound stage, and precise imaging Banana Plugs all around. These can be swapped out for pins or spades from Monster. Look at the photos and judge for yourselves. Ive been the only owner, and I DO NOT abuse my audio gear. Theyre great cables - I simply dont need them any longer. Priced to be BOUGHT, not to be watched! Ill ship them straight to your door via FREE FedEx Ground, insured of course.

Monster Cable M1.2S - 15ft L/R + 10ft Center - Original Boxes - FREE FedEx Ground UL CL3-RatedPre-terminated with Monster Lock Master Banana PlugsIdeal for home theater systemsMultiTwist construction provides enhanced sonic performance and superior noise rejection throughout the audio bandwidthPEX Dielectric for improved signal transfer and enhanced reproduction of harmonic structure and inner detailMagnetic Flux Tube technology in each conductor controls distortion and produces maximum bass response and more natural soundDeep bass, extended high frequencies, wide sound stage, and precise imaging Banana Plugs all around. These can be swapped out for pins or spades from Monster. Look at the photos and judge for yourselves. Ive been the only owner, and I DO NOT abuse my audio gear. Theyre great cables - I simply dont need them any longer. Priced to be BOUGHT, not to be watched! Ill ship them straight to your door via FREE FedEx Ground, insured of course.

Monster Cable M1.2S - 15ft L/R + 10ft Center - Original Boxes - FREE FedEx Ground UL CL3-RatedPre-terminated with Monster Lock Master Banana PlugsIdeal for home theater systemsMultiTwist construction provides enhanced sonic performance and superior noise rejection throughout the audio bandwidthPEX Dielectric for improved signal transfer and enhanced reproduction of harmonic structure and inner detailMagnetic Flux Tube technology in each conductor controls distortion and produces maximum bass response and more natural soundDeep bass, extended high frequencies, wide sound stage, and precise imaging Banana Plugs all around. These can be swapped out for pins or spades from Monster. Look at the photos and judge for yourselves. Ive been the only owner, and I DO NOT abuse my audio gear. Theyre great cables - I simply dont need them any longer. Priced to be BOUGHT, not to be watched! Ill ship them straight to your door via FREE FedEx Ground, insured of course.

Monster Cable M1.2S - 15ft L/R + 10ft Center - Original Boxes - FREE FedEx Ground UL CL3-RatedPre-terminated with Monster Lock Master Banana PlugsIdeal for home theater systemsMultiTwist construction provides enhanced sonic performance and superior noise rejection throughout the audio bandwidthPEX Dielectric for improved signal transfer and enhanced reproduction of harmonic structure and inner detailMagnetic Flux Tube technology in each conductor controls distortion and produces maximum bass response and more natural soundDeep bass, extended high frequencies, wide sound stage, and precise imaging Banana Plugs all around. These can be swapped out for pins or spades from Monster. Look at the photos and judge for yourselves. Ive been the only owner, and I DO NOT abuse my audio gear. Theyre great cables - I simply dont need them any longer. Priced to be SOLD, not to be watched! Ill ship them straight to your door via FREE FedEx Ground, insured of course.

RARE Infinity INTERMEZZO 1.2s Subwoofer ITM 1.2S BLK W/ 24 Monster Cable ZB100 RCA Interconnect Cable Infinity Intermezzo 1.2s (ITM 1.2S BLK) subwoofer (MSRP: $1,800.00) with 24 Monster Cable ZB 100 SW-24 subwoofer interconnect cable (MSRP: $250.00), and R.A.B.O.S. is included. The subwoofer was part of a secondary system and was used for less than 100 hours. It worked perfectly before being placed in climate-controlled storage about 13 years ago. The speaker power-ups when plugged in, as shown in the listing pictures. Speaker exhibit some minor scuffs/scrapes and smudges. Please examine pictures to determine condition of item. Speaker being sold by original owner. Original packaging is included. Below is an April 18, 2003 review by Home Theater Review: The Intermezzo subwoofer is a truly unique and revolutionary design for a number of reasons. An incredible 850-watt RMS amplifier featuring Infinitys patented Room Adaptive Bass Optimization System (R.A.B.O.S.) powers the 12 C.M.M.D. woofer. The R.A.B.O.S. system is an interactive parametric equalization system that enables the speaker to adapt to the listening environment. The Intermezzo 1.2s subwoofer (15.25x 18.25x 13.75) features a die-cast aluminum enclosure and weighs about 62 pounds total. It includes a test CD, an electronic meter, and a key to use when dialing in the R.A.B.O.S. On the back are push button switches for high-pass/low-pass filters and 0 to 180 phase shifting, a variable 100Hz 6dB per-octave crossover, low-level inputs and the highest quality high-level inputs I have ever seen on a subwoofer. The front baffle of the sub features a gain/volume control that glows red or green to signify On/Off and three small keyholes for use when dialing in the R.A.B.O.S. system. The Intermezzo 1.2s sub is a real back breaker. However, it is compact enough for one person to manage. It includes a 15-foot power cord to give users plenty of placement options--after all, with the built-in self equalization system, the 1.2s can be placed anywhere in the room and tuned for performance maximization. I could write an entire 3-page review just on the 1.2s sub. Not only do the performance and features warrant it, but it is the smartest subwoofer I have ever auditioned. The R.A.B.O.S. kit includes a slick Sound Level Meter, Test CD, Adjustment Key, a Bandwidth Selector and graphs. Learning how to use the system and dialing in the sub will take about an hour and the results are well worth the time spent. I measured the subwoofer (for fun) down to 15Hz at 104.5dB. This measurement was taken in a subjective environment, but the fact remains: the Intermezzo sub hits low and loud. Add in the sheer musical quality of the 1.2s and the result equals the most well rounded subwoofer Ive laid ears on. Couple that bone crushing bass output with the headroom and top-end output, and youve got one heck of a dynamic speaker ensemble. Specifications: Frequency Response: 23Hz – 130Hz (±3dB) 30Hz – 130Hz (±1.5dB) Subwoofer Amplifier Output: 850 watts continuous, 2,600 watts peak (Into 8? from 20Hz – 100Hz with no more than 0.1% THD) 2nd- and 3rd-Order Harmonic Distortion: <1% (20Hz – 130Hz @ 95dB SPL) Crossover Frequencies: 50Hz – 130Hz Continuously Variable 24dB/Octave Dimensions: (H x W x D): 15-1/4 x 18-1/4 x 13-3/4 (387mm x 464mm x 349mm) Weight: 62 lbs. About the Monster Cable ZBass100: Get the deepest, clearest bass possible from your powered subwoofer — hook it up with Monsters specially-engineered ZBass100 cable! This superior cable uses a balanced design with 3 tightly twisted, solid-core copper conductors for incredible low-frequency definition. Monsters unique Quadripole™ cable construction, combined with heavy-duty double shielding, offers maximum noise rejection. The ZBass100 also features Monsters low-loss PEX™ dielectric to reduce attenuation, delivering the strongest signal possible. 24k gold-plated Turbine® RCA connectors with a 12-cut collar and split center pin give you optimum, corrosion-free contact. Y-adapter included for connecting subwoofers with dual RCA inputs. Details: •optimized for high-performance bass •balanced, triple solid-core conductor design •heavy-duty double shielding •Duraflex protective jacket •mono cable •Y-adapter included •24k gold-plated, 12-cut Turbine RCA connectors with split center pin •lifetime warranty See sellers listing for matching Infinity Intermezzo 2.6 (ITM2.6 BLK) speakers and Infinity Intermezzo floor stands (FS-ITM) include Kimber Kable 4TC 18 speaker cables. ITEMS ARE AVAILABLE FOR LOCAL PICKUP ONLY. The items are being sold AS-IS. Returns not accepted for these items.

As pictured

RARE Infinity INTERMEZZO 1.2s Subwoofer ITM 1.2S BLK W/ 24 Monster Cable ZB100 RCA Interconnect Cable Infinity Intermezzo 1.2s (ITM 1.2S BLK) subwoofer (MSRP: $1,800.00) with 24 Monster Cable ZB 100 SW-24 subwoofer interconnect cable (MSRP: $250.00), and R.A.B.O.S. is included. The subwoofer was part of a secondary system and was used for less than 100 hours. It worked perfectly before being placed in climate-controlled storage about 13 years ago. The speaker power-ups when plugged in, as shown in the listing pictures. Speaker exhibit some minor scuffs/scrapes and smudges. Please examine pictures to determine condition of item. Speaker being sold by original owner. Original packaging is included. Below is an April 18, 2003 review by Home Theater Review: The Intermezzo subwoofer is a truly unique and revolutionary design for a number of reasons. An incredible 850-watt RMS amplifier featuring Infinitys patented Room Adaptive Bass Optimization System (R.A.B.O.S.) powers the 12 C.M.M.D. woofer. The R.A.B.O.S. system is an interactive parametric equalization system that enables the speaker to adapt to the listening environment. The Intermezzo 1.2s subwoofer (15.25x 18.25x 13.75) features a die-cast aluminum enclosure and weighs about 62 pounds total. It includes a test CD, an electronic meter, and a key to use when dialing in the R.A.B.O.S. On the back are push button switches for high-pass/low-pass filters and 0 to 180 phase shifting, a variable 100Hz 6dB per-octave crossover, low-level inputs and the highest quality high-level inputs I have ever seen on a subwoofer. The front baffle of the sub features a gain/volume control that glows red or green to signify On/Off and three small keyholes for use when dialing in the R.A.B.O.S. system. The Intermezzo 1.2s sub is a real back breaker. However, it is compact enough for one person to manage. It includes a 15-foot power cord to give users plenty of placement options--after all, with the built-in self equalization system, the 1.2s can be placed anywhere in the room and tuned for performance maximization. I could write an entire 3-page review just on the 1.2s sub. Not only do the performance and features warrant it, but it is the smartest subwoofer I have ever auditioned. The R.A.B.O.S. kit includes a slick Sound Level Meter, Test CD, Adjustment Key, a Bandwidth Selector and graphs. Learning how to use the system and dialing in the sub will take about an hour and the results are well worth the time spent. I measured the subwoofer (for fun) down to 15Hz at 104.5dB. This measurement was taken in a subjective environment, but the fact remains: the Intermezzo sub hits low and loud. Add in the sheer musical quality of the 1.2s and the result equals the most well rounded subwoofer Ive laid ears on. Couple that bone crushing bass output with the headroom and top-end output, and youve got one heck of a dynamic speaker ensemble. Specifications: Frequency Response: 23Hz – 130Hz (±3dB) 30Hz – 130Hz (±1.5dB) Subwoofer Amplifier Output: 850 watts continuous, 2,600 watts peak (Into 8? from 20Hz – 100Hz with no more than 0.1% THD) 2nd- and 3rd-Order Harmonic Distortion: <1% (20Hz – 130Hz @ 95dB SPL) Crossover Frequencies: 50Hz – 130Hz Continuously Variable 24dB/Octave Dimensions: (H x W x D): 15-1/4 x 18-1/4 x 13-3/4 (387mm x 464mm x 349mm) Weight: 62 lbs. About the Monster Cable ZBass100: Get the deepest, clearest bass possible from your powered subwoofer — hook it up with Monsters specially-engineered ZBass100 cable! This superior cable uses a balanced design with 3 tightly twisted, solid-core copper conductors for incredible low-frequency definition. Monsters unique Quadripole™ cable construction, combined with heavy-duty double shielding, offers maximum noise rejection. The ZBass100 also features Monsters low-loss PEX™ dielectric to reduce attenuation, delivering the strongest signal possible. 24k gold-plated Turbine® RCA connectors with a 12-cut collar and split center pin give you optimum, corrosion-free contact. Y-adapter included for connecting subwoofers with dual RCA inputs. Details: •optimized for high-performance bass •balanced, triple solid-core conductor design •heavy-duty double shielding •Duraflex protective jacket •mono cable •Y-adapter included •24k gold-plated, 12-cut Turbine RCA connectors with split center pin •lifetime warranty See sellers listing for matching Infinity Intermezzo 2.6 (ITM2.6 BLK) speakers and Infinity Intermezzo floor stands (FS-ITM) include Kimber Kable 4TC 18 speaker cables. ITEMS ARE AVAILABLE FOR LOCAL PICKUP ONLY. The items are being sold AS-IS. Returns not accepted for these items.

Monster tonearm installation cable for turntables with a fixed phono cable. 1.2m. Solid core cable with foil and braid screen and nitrogen injected dielectric to reduce density and thus improve signal quality. The other end is cut, so you can alter the length as required during installation. Most cables of this type for installation are sold with a braid shield only - no foil, which risks noise being induced into the delicate signals from the cartridge. This Monster cable has both foil and braid screen, giving 100% coverage and low impedance. • Left and Right terminated with gold plated Monster Phono Plugs • Ground lead terminated with spade at one end Background to design For a turntable to phonostage a COAXIAL cable is best with a SINGLE core and DOUBLE screening, with both a foil and braid.This is because the output from the cartridge is at an extremely low signal level compared to other interconnect cables;· • A balanced cable with XLR’s - 4Volts· • A Line level signal e.g. CD to Preamp - 2Volts· • Moving Magnet 5mV or 0.005V - one four hundredth of the size of line level • Moving Coil typically 0.2mV or 0.0002V a ten thousandth of the size of line level Needless to say, cables designed for XLR studio cables or Line level cables do not work well for these tiny signals.In this circumstance SHIELDING, and quality of the conductor and dilectric are the most important design parameters. Single core coaxial cable offers the lowest capacitance and in this case 2 layers of shielding, with silver plated high purity copper conductor and braid Mylar / aluminium foil shield with polyethylene dilectric. This is quite a significant step up over the manufacturers supplied cable, which will have lower quality Copper with no silver plating and they usually use PVC dielectric.

Monster tonearm installation cable for turntables with a fixed phono cable. 1.25m.  Solid core cable with foil and braid screen and nitrogen injected dielectric to reduce density and thus improve signal quality. The other end is cut, with a new piece of heat shrink, for the braid, so you can alter the length as required during installation. Most cables of this type for installation are sold with a braid shield only - no foil, which risks noise being induced into the delicate signals from the cartridge. This Monster cable has both foil and braid screen, giving 100% coverage and low impedance.  • Left and Right terminated with gold plated Monster Phono Plugs • Ground lead terminated with spade at one end Background to design For a turntable to phonostage a COAXIAL cable is best with a SINGLE core and DOUBLE screening, with both a foil and braid.This is because the output from the cartridge is at an extremely low signal level compared to other interconnect cables;·       • A balanced cable with XLR’s - 4Volts·       • A Line level signal e.g. CD to Preamp - 2Volts·       • Moving Magnet 5mV or 0.005V - one four hundredth of the size of line level       • Moving Coil typically 0.2mV or 0.0002V a ten thousandth of the size of line level  Needless to say, cables designed for XLR studio cables or Line level cables do not work well for these tiny signals.In this circumstance SHIELDING, and quality of the conductor and dilectric are the most important design parameters.  Single core coaxial cable offers the lowest capacitance and in this case 2 layers of shielding, with silver plated high purity copper conductor and braid Mylar / aluminium foil shield with polyethylene dilectric. This is quite a significant step up over the manufacturers supplied cable, which will have lower quality Copper with no silver plating and they usually use PVC dielectric.

Profigold tonearm installation cable for turntables with a fixed phono cable. 1.2m. This length gives approx 75pF capacitance ideal for a Moving Magnet cartridge. Assembled in the UK. OFC Copper conductor with foil and braid screen. Fitted with Neutrik phono plugs at one end, the other end is cut, with a new piece of heat shrink, for the braid, so you can alter the length as required during installation into a turntable or arm. Most cables of this type for installation are sold with a braid shield only - no foil, which risks noise being induced into the delicate signals from the cartridge. This Monster cable has both foil and braid screen, giving 100% coverage and low impedance. • Left and Right terminated with gold plated Neutrik Phono Plugs • Ground lead terminated with spade at one end Background to design For a turntable to phonostage a COAXIAL cable is best with a SINGLE core and DOUBLE screening, with both a foil and braid.This is because the output from the cartridge is at an extremely low signal level compared to other interconnect cables;· • A balanced cable with XLR’s - 4Volts· • A Line level signal e.g. CD to Preamp - 2Volts· • Moving Magnet 5mV or 0.005V - one four hundredth of the size of line level • Moving Coil typically 0.2mV or 0.0002V a ten thousandth of the size of line level Needless to say, cables designed for XLR studio cables or Line level cables do not work well for these tiny signals.In this circumstance SHIELDING, and quality of the conductor and dilectric are the most important design parameters. Single core coaxial cable offers the lowest capacitance and in this case 2 layers of shielding, with silver plated high purity copper conductor and braid Mylar / aluminium foil shield with polyethylene dilectric. This is quite a significant step up over the manufacturers supplied cable, which will have lower quality Copper with no silver plating and they usually use PVC dielectric.

Precision splitting of chrominance and luminance signals and maximum reduction of dot crawl24k gold contacts provides an easy-to-use, low-loss connectionRugged metal shell connector for maximum durabilityHeavy duty strain relief prevents connector damage caused by heavy use

RARE Infinity INTERMEZZO 1.2s Subwoofer ITM 1.2S BLK W/ 24 Monster Cable ZB100 RCA Interconnect Cable Infinity Intermezzo 1.2s (ITM 1.2S BLK) subwoofer (MSRP: $1,800.00) with 24 Monster Cable ZB 100 SW-24 subwoofer interconnect cable (MSRP: $250.00), and R.A.B.O.S. is included. The subwoofer was part of a secondary system and was used for less than 100 hours. It worked perfectly before being placed in climate-controlled storage about 13 years ago. The speaker power-ups when plugged in, as shown in the listing pictures. Speaker exhibit some minor scuffs/scrapes and smudges. Please examine pictures to determine condition of item. Speaker being sold by original owner. Original packaging is included. Below is an April 18, 2003 review by Home Theater Review: The Intermezzo subwoofer is a truly unique and revolutionary design for a number of reasons. An incredible 850-watt RMS amplifier featuring Infinitys patented Room Adaptive Bass Optimization System (R.A.B.O.S.) powers the 12 C.M.M.D. woofer. The R.A.B.O.S. system is an interactive parametric equalization system that enables the speaker to adapt to the listening environment. The Intermezzo 1.2s subwoofer (15.25x 18.25x 13.75) features a die-cast aluminum enclosure and weighs about 62 pounds total. It includes a test CD, an electronic meter, and a key to use when dialing in the R.A.B.O.S. On the back are push button switches for high-pass/low-pass filters and 0 to 180 phase shifting, a variable 100Hz 6dB per-octave crossover, low-level inputs and the highest quality high-level inputs I have ever seen on a subwoofer. The front baffle of the sub features a gain/volume control that glows red or green to signify On/Off and three small keyholes for use when dialing in the R.A.B.O.S. system. The Intermezzo 1.2s sub is a real back breaker. However, it is compact enough for one person to manage. It includes a 15-foot power cord to give users plenty of placement options--after all, with the built-in self equalization system, the 1.2s can be placed anywhere in the room and tuned for performance maximization. I could write an entire 3-page review just on the 1.2s sub. Not only do the performance and features warrant it, but it is the smartest subwoofer I have ever auditioned. The R.A.B.O.S. kit includes a slick Sound Level Meter, Test CD, Adjustment Key, a Bandwidth Selector and graphs. Learning how to use the system and dialing in the sub will take about an hour and the results are well worth the time spent. I measured the subwoofer (for fun) down to 15Hz at 104.5dB. This measurement was taken in a subjective environment, but the fact remains: the Intermezzo sub hits low and loud. Add in the sheer musical quality of the 1.2s and the result equals the most well rounded subwoofer Ive laid ears on. Couple that bone crushing bass output with the headroom and top-end output, and youve got one heck of a dynamic speaker ensemble. Specifications: Frequency Response: 23Hz – 130Hz (±3dB) 30Hz – 130Hz (±1.5dB) Subwoofer Amplifier Output: 850 watts continuous, 2,600 watts peak (Into 8? from 20Hz – 100Hz with no more than 0.1% THD) 2nd- and 3rd-Order Harmonic Distortion: <1% (20Hz – 130Hz @ 95dB SPL) Crossover Frequencies: 50Hz – 130Hz Continuously Variable 24dB/Octave Dimensions: (H x W x D): 15-1/4 x 18-1/4 x 13-3/4 (387mm x 464mm x 349mm) Weight: 62 lbs. About the Monster Cable ZBass100: Get the deepest, clearest bass possible from your powered subwoofer — hook it up with Monsters specially-engineered ZBass100 cable! This superior cable uses a balanced design with 3 tightly twisted, solid-core copper conductors for incredible low-frequency definition. Monsters unique Quadripole™ cable construction, combined with heavy-duty double shielding, offers maximum noise rejection. The ZBass100 also features Monsters low-loss PEX™ dielectric to reduce attenuation, delivering the strongest signal possible. 24k gold-plated Turbine® RCA connectors with a 12-cut collar and split center pin give you optimum, corrosion-free contact. Y-adapter included for connecting subwoofers with dual RCA inputs. Details: •optimized for high-performance bass •balanced, triple solid-core conductor design •heavy-duty double shielding •Duraflex protective jacket •mono cable •Y-adapter included •24k gold-plated, 12-cut Turbine RCA connectors with split center pin •lifetime warranty See sellers listing for matching Infinity Intermezzo 2.6 (ITM2.6 BLK) speakers and Infinity Intermezzo floor stands (FS-ITM) include Kimber Kable 4TC 18 speaker cables. ITEMS ARE AVAILABLE FOR LOCAL PICKUP ONLY. The items are being sold AS-IS. Returns not accepted for these items.

Monster Essentials High Speed HDMI Cable FHD 1080p 4 FT / 1.21 M - White Open box item. Item will be in new condition, retail packaging may be slightly tatty. However we back this up with a 1 year warranty! Monster High Speed HDMI cable is the ideal connectivity solution for HDTV set-ups and gaming. It delivers 1080p video and 5.1 or 7.1 uncompressed surround sound audio. This cable features standard HDMI connectors on both ends and the cable is 4 feet long. HDTVs, Laptops, Blu-ray Disc Players, Gaming Devices, Cable and Satellite ReceiversHigh Speed 10.2 Gbps transfer rateExclusive V-Grip connector for more reliable connectionsHeavy-Duty Triple-Layer ShieldingLarge-Gauge Copper conductors Shipping We offer free shipping to the UK mainland, however please note that some remote areas may not be eligible for free shipping. Please note for remote parts of the UK or overseas there may not be a next day service available. All orders placed before 13:00 will be shipped the same working day (Mon-Fri). Payment We only accept payment via Paypal or Debit/Credit card through the Ebay checkout system. This keeps us and you secure. Contact Us Please contact us via Ebay messages, this is the fastest and safest way to contact us. Please contact us before starting a return as we may be able to help you with your problem. We only work during office hours Monday to Friday between 09:30 and 17:00.

Open box but never used.

Monster tonearm installation cable for turntables with a fixed phono cable. 1.2m. Solid core cable with foil and braid screen and nitrogen injected dielectric to reduce density and thus improve signal quality. The other end is cut, so you can alter the length as required during installation. Most cables of this type for installation are sold with a braid shield only - no foil, which risks noise being induced into the delicate signals from the cartridge. This Monster cable has both foil and braid screen, giving 100% coverage and low impedance. • Left and Right terminated with gold plated Monster Phono Plugs • Ground lead terminated with spade at one end Background to design For a turntable to phonostage a COAXIAL cable is best with a SINGLE core and DOUBLE screening, with both a foil and braid.This is because the output from the cartridge is at an extremely low signal level compared to other interconnect cables;· • A balanced cable with XLR’s - 4Volts· • A Line level signal e.g. CD to Preamp - 2Volts· • Moving Magnet 5mV or 0.005V - one four hundredth of the size of line level • Moving Coil typically 0.2mV or 0.0002V a ten thousandth of the size of line level Needless to say, cables designed for XLR studio cables or Line level cables do not work well for these tiny signals.In this circumstance SHIELDING, and quality of the conductor and dilectric are the most important design parameters. Single core coaxial cable offers the lowest capacitance and in this case 2 layers of shielding, with silver plated high purity copper conductor and braid Mylar / aluminium foil shield with polyethylene dilectric. This is quite a significant step up over the manufacturers supplied cable, which will have lower quality Copper with no silver plating and they usually use PVC dielectric.