The 3300 is a Monitor Series integrated amp made of most of the 1300 preamp and half of the 2600 power amp : MM & MC inputs with 3-step capacitance switch, low-impedance outputs, buffered tape i/os, lab input (to be fed from the preamp out and bypass all filters and controls), 30A and 400W of peak current/output available maintained in listenable regions with NAD's staple Soft-Clipping circuit. That much output goes with the Power Envelope circuit : two voltage rails for high and low power ranges. When listening loud, switching back and forth between rails therefore happens... I believe the 3300 was first available without the PE circuit. (?) The owner's manual is still available for download at NAD's NAD's.

The 3300 is a Monitor Series integrated amp made of most of the 1300 preamp and half of the 2600 power amp : MM & MC inputs with 3-step capacitance switch, low-impedance outputs, buffered tape i/os, lab input (to be fed from the preamp out and bypass all filters and controls), 30A and 400W of peak current/output available maintained in listenable regions with NAD's staple Soft-Clipping circuit. That much output goes with the Power Envelope circuit : two voltage rails for high and low power ranges. When listening loud, switching back and forth between rails therefore happens... I believe the 3300 was first available without the PE circuit. (?) The owner's manual is still available for download at NAD's NAD's.

The 3300 is a Monitor Series integrated amp made of most of the 1300 preamp and half of the 2600 power amp : MM & MC inputs with 3-step capacitance switch, low-impedance outputs, buffered tape i/os, lab input (to be fed from the preamp out and bypass all filters and controls), 30A and 400W of peak current/output available maintained in listenable regions with NAD's staple Soft-Clipping circuit. That much output goes with the Power Envelope circuit : two voltage rails for high and low power ranges. When listening loud, switching back and forth between rails therefore happens... I believe the 3300 was first available without the PE circuit. (?) The owner's manual is still available for download at NAD's NAD's.

NAD Model 3300 Amplifier Service Manual *Original*.

The 3300 is a Monitor Series integrated amp made of most of the 1300 preamp and half of the 2600 power amp : MM & MC inputs with 3-step capacitance switch, low-impedance outputs, buffered tape i/os, lab input (to be fed from the preamp out and bypass all filters and controls), 30A and 400W of peak current/output available maintained in listenable regions with NAD's staple Soft-Clipping circuit. That much output goes with the Power Envelope circuit : two voltage rails for high and low power ranges. When listening loud, switching back and forth between rails therefore happens... I believe the 3300 was first available without the PE circuit. (?) The owner's manual is still available for download at NAD's NAD's.

Amplificateur NAD 3300 Quand NAD avait une bonne équipe de conception. Le 3300 est un ampli intégré de la série Monitor composé de la majeure partie du préampli 1300 et de la moitié de lampli de puissance 2600 : entrées MM et MC avec commutateur de capacité à 3 niveaux, sorties à faible impédance, entrées/sorties de bande tamponnées, entrée lab ( à alimenter à partir de la sortie du préampli et contourner tous les filtres et commandes), 30A et 400W de courant/sortie de crête disponibles maintenus dans les régions écoutables avec le circuit Soft-Clipping de base de NAD . Caractéristiques : Section ALIMENTATIONPuissance de sortie moyenne continue :2x 60W (1,78dBW ; min. RMS , 8 Ohm, 20 Hz ...20 Khz )THD :0,03% (20 Hz ...20 Khz )IMD :< 0,03% (de 250mW à la puissance nominale)< 0,03% (CCIF IMD, 19 + 20 Khz à la sortie nominale)Pouvoir décrêtage :2x 70W (8 Ohms)Marge dynamique IHF :+ 6 dB (8 ohms)Puissance dynamique IHF :2x 250W (8 Ohm, puissance de sortie max. à court terme)2x 300W (4 Ohm, puissance de sortie max. à court terme)2x 400W (2 Ohm, puissance de sortie max. à court terme)Courant de sortie crête :> 30ACapacité de charge réactive :+ 1,5 dBTemps de récupération de surcharge transitoire :< 1µsFacteur de balayage :> 50Vitesse de balayage :30 V /µsFacteur damortissement :> 100 (8 Ohms / 50 Hz )Entrée pour puissance nominale :1V _Entrée pour sortie 1W :120 mVEntrée pour sortie 150W :1,5V _Gain de tension :x25 (28 dB )Section PHONOImpédance dentrée :47 kOhms + 100/200/300pF (MM)100 Ohms + 1000pF (MC)Sensibilité dentrée :0,4 mV (MM, sortie 1W, 1 Khz )0,02 mV (MC, sortie 1W, 1 Khz )Surcharge dentrée MM :18 mV (20 Hz )170 mV (1 Khz )1,5 V (20 Khz )Surcharge entrée MC :0,8 mV (20 Hz )8mV ( 1kHz ) _70 mV (20 kHz )THD :< 0,02% (+30 dB ; 20 Hz ...20 Khz )Précision RIAA :± 0,3 dBRapport signal/bruit :80 dB (entrée MM, IHF-A, 5 mV )80 dB (MC, IHF-A, entrée 0,5 mV )Rubrique LIGNEImpédance dentrée :100 kOhms + 100pFSensibilité dentrée :25 mV (pour sortie 1W)Signal dentrée maximal :8 V RMSRapport signal/bruit :100 dB (pour sortie 1W)118 dB (pour la sortie nominale)Fréquence de réponse :20Hz ... 20KHz ( ± 0,5dB )Sorties préamp :800 ohms10V _Sorties bande :100 Ohm (tamponné)-3 dB à 15 Hz (12 dB /octave)Section TONContrôle des basses :± 10 dB à 50, 120 Hz ou 250 HzContrôle des aigus :± 10 dB à 6 ou 12 KhzÉgaliseur des basses :+ 3 dB à 60 Hz+ 6 dB à 32 HzFiltre infrasonore :-3 dB à 14 Hz (18 dB /octave)GénéralPC :375W (110 / 120 / 220 / 240 V CA )Dimension :43,5 x 10,5 x 38,1 cmPoids :10 kg . Envoi à létranger = me contacter.

WE ARE AN AUTHORIZED NAD DEALER!PREOWNED - $600 LIST! - FULLY TESTED

NAD 3300 INTERGRATED MONITOR SERIES AMPLIFIER 60 WATTS PER CHANNEL** NICE **.