Pro-Ject 1Xpression Mk2 Turntable Complete with Ortofon Cartridge & Acrylic Mat.. Time has come to sell on my much admired Pro-Ject 1Xpression Mk2 turntable, to part-finance an upgrade to an X1 or X2. Purchased new from AudioT here in Cardiff, this is my first decent turntable...! In excellent condition throughout, with no blemishes worth mentioning, apart from the almost inevitable and commonplace nick in plinth paintwork (see photo) from the cover ‘crashing’ down whilst re-adjusting the hinges, despite my best efforts over time to ensure this wouldn’t happen to me - could be touched up with matt grey hobby paint, or covered with small, self adhesive cushion pads...!? Used only by myself and sparingly, so no wear & tear or breakages to be concerned with - the plastic lid will have the usual light swirl marks from dusting and wiping clean. Fitted with its original Ortofon cartridge, which has seen little use, having been swapped out for an Ortofon 2M Bronze and has the heavier counterweight to accommodate the additional weight of this series of cartridges. Comes with all original/standard accessories, paperwork and box. Also included is an acrylic mat which effectively dampens any resonance or ringing from low frequency feedback or the metal platter. I’ll set it up so it’s ready to go: arm height and vertical tracking (azimuth), tracking force, et cetera. Will be double boxed to preserve original packaging, sent securely and fully insured - collection welcome, or even delivery for petrol money in lieu of postage, if you’re not too far away and concerned about its safety. Any questions or queries are welcome and thanks for looking.

Pro-Ject 1-Xpression III Turntable Carbon Oyster Cartridge - STORE DISPLAY.

Pro-Ject 1 Xpression Plattenspieler Carbon Tonarm Audio Technica, Turntable Einwandfreier Technische Zustand vorhanden Deckel hätte geringe nutzungsspuren sonst top zustand

Pro-ject 1 Xpression 111 turntable Anthracite (Grey). Condition is Used. Dispatched with Royal Mail Special Delivery (TM) 1:00 pm.

Pro-Ject 1Xpression Mk2 Turntable Complete with Ortofon Cartridge & Acrylic Mat.. Time has come to sell on my much admired Pro-Ject 1Xpression Mk2 turntable, to part-finance an upgrade to an X1 or X2. Purchased new from AudioT here in Cardiff, this is my first decent turntable...! In excellent condition throughout, with no blemishes worth mentioning, apart from the almost inevitable and commonplace nick in plinth paintwork (see photo) from the cover ‘crashing’ down whilst re-adjusting the hinges, despite my best efforts over time to ensure this wouldn’t happen to me - could be touched up with matt grey hobby paint, or covered with small, self adhesive cushion pads...!? Used only by myself and sparingly, so no wear & tear or breakages to be concerned with - the plastic lid will have the usual light swirl marks from dusting and wiping clean. Fitted with its original Ortofon cartridge, which has seen little use, having been swapped out for an Ortofon 2M Bronze and has the heavier counterweight to accommodate the additional weight of this series of cartridges. Comes with all original/standard accessories, paperwork and box. Also included is an acrylic mat which effectively dampens any resonance or ringing from low frequency feedback or the metal platter. I’ll set it up so it’s ready to go: arm height and vertical tracking (azimuth), tracking force, et cetera. Will be double boxed to preserve original packaging, sent securely and fully insured - collection welcome, or even delivery for petrol money in lieu of postage, if you’re not too far away and concerned about its safety. Any questions or queries are welcome and thanks for looking.

Pro-Ject 1-Xpression III Comfort Ich verkaufe hier einen Pro-Ject 1-Xpression III Comfort Plattenspieler. Der Plattenspieler wird verkauft, da ich auf einen Pro-Ject X2 umgestiegen bin. Der Plattenspieler wurde im Jahr 2020 gekauft und befindet sich in einem neuwertigen, gepflegten Zustand. Der Inhalt/Zubehör ist komplett. Der Plattenspieler wird mit montierten Transportsicherungsschrauben, zerlegt im Originalkarton verschickt. Beschreibung:Manueller Plattenspieler mit montiertem Tonabnehmer Ortofon 2M Red, elektronischer Geschwindigkeitsumschaltung und Endabschaltung Technik für den guten Klang: • Tonarm mit Karbonfaserrohr und Saphirlagern • Verstellmöglichkeit des vertikalen (VTA) und horizontalen Abtastwinkels (Azimut) • Satinierter Acrylplattenteller und Edelstahl-Tellerlagerachse mit Teflon-Lagerspiegel in Messinglaufbuchse • Integrierte Motorsteuerung (Sinusgenerator, wie in der Speed Box) • Gummibedämpfte Aluminiumkegelfüße Ausstattungsmerkmale: • Montierter MM-Tonabnehmer Ortofon 2M Red • Tonarm Pro-Ject 8.6c • Elektronische Geschwindigkeitswahl für 33 und 45 U/Min • Mechanische Geschwindigkeitswahl für 78 U/Min • Optoelektronische Endabschaltung • Anschlussterminal mit vergoldeten Cinch-Buchsen • Staubschutzhaube im Lieferumfang • Chassis in anthrazit-grauem Pianolack Technische Daten: Montierter TonabnehmerOrtofon 2M Red VerstärkeranschlussPhono MM Geschwindigkeiten33 / 45/ 78 U/Min Elektronische Geschwindigkeitswahl33 / 45 U/Min Mechanische Geschwindigkeitswahl78 U/Min Staubschutzhaubeja Anschlussterminal mit Cinch-Buchsenja Aluminiumkegelfüße mit Kautschukelement bedämpftja TonarmPro-Ject 8.6c Tonarm mit Karbonfaserrohr und Saphirlagernja Effektive Tonarmlänge218,5mm (8,6) Effektive Tonarmmasse8,7g Überhang18,5mm Mitgeliefertes Gegengewicht fürTonabnehmergewicht 7 - 12g Optionales Gegengewicht fürTonabnehmergewicht 4 - 7g Auflagekraft10 - 30mN Max. Geschwindigkeitsabweichung±0,5% Max. Gleichlaufschwankungen±0,1% Max. Rumpeln-70dB Plattenteller Gewicht/Durchmesser0,9kg/300mm NetzanschlussSteckernetzteil, 220 - 240V/50Hz Ausgangsspannung16V/500mA AC Leistungsaufnahme10W Maße (Staubschutzhaube offen)415 x 365 x 405mm Maße (Staubschutzhaube geschlossen)415 x 118 x 320mm Gewicht5,5kg

Pro-ject 1Xpression Turntable sprayed ( White ) fitted with a New RPM 1.3 Genie tonearm. A Cartridge from the Denon DP-400 turntable tracking at 2 grams. Mains powered so not adaptors to lose. Interconnect cable with earth ground wire. 45 RPM adaptor and speed change key. Instructions. Plinth unmarked. Dust Cover has a few marks. The counterweight will be removed for transport so tracking force will need resetting on set up. Will be well packaged and double boxed.Cartridge with flip down guard.Finest DSN-85 stylus for cartridge fitted to DP-400 turntable. ? Made by Japanese shokunin.? Special conical diamond tip radius: 15 µm (.0006 in.) 0.6 mil? Low-mass thin-wall alloy cantilever for tracing accuracy and fidelityThe Rega Carbon, Audio Technica AT-3600L, AT-91R or the LP Gear ATN3600DXVL stylus will fit.

Pro-Ject 1Xpression Mk2 Turntable Complete with Ortofon Cartridge & Acrylic Mat.. Time has come to sell on my much admired Pro-Ject 1Xpression Mk2 turntable, to part-finance an upgrade to an X1 or X2. Purchased new from AudioT here in Cardiff, this is my first decent turntable...! In excellent condition throughout, with no blemishes worth mentioning, apart from the almost inevitable and commonplace nick in plinth paintwork (see photo) from the cover ‘crashing’ down whilst re-adjusting the hinges, despite my best efforts over time to ensure this wouldn’t happen to me - could be touched up with matt grey hobby paint, or covered with small, self adhesive cushion pads...!? Used only by myself and sparingly, so no wear & tear or breakages to be concerned with - the plastic lid will have the usual light swirl marks from dusting and wiping clean. Fitted with its original Ortofon cartridge, which has seen little use, having been swapped out for an Ortofon 2M Bronze and has the heavier counterweight to accommodate the additional weight of this series of cartridges. Comes with all original/standard accessories, paperwork and box. Also included is an acrylic mat which effectively dampens any resonance or ringing from low frequency feedback or the metal platter. I’ll set it up so it’s ready to go: arm height and vertical tracking (azimuth), tracking force, et cetera. Will be double boxed to preserve original packaging, sent securely and fully insured - collection welcome, or even delivery for petrol money in lieu of postage, if you’re not too far away and concerned about its safety. Any questions or queries are welcome and thanks for looking.

Pro-Ject 1-Xpression III Comfort Ich verkaufe hier einen Pro-Ject 1-Xpression III Comfort Plattenspieler. Der Plattenspieler wird verkauft, da ich auf einen Pro-Ject X2 umgestiegen bin. Der Plattenspieler wurde im Jahr 2020 gekauft und befindet sich in einem neuwertigen, gepflegten Zustand. Der Inhalt/Zubehör ist komplett. Der Plattenspieler wird mit montierten Transportsicherungsschrauben, zerlegt im Originalkarton verschickt. Beschreibung:Manueller Plattenspieler mit montiertem Tonabnehmer Ortofon 2M Red, elektronischer Geschwindigkeitsumschaltung und Endabschaltung Technik für den guten Klang: • Tonarm mit Karbonfaserrohr und Saphirlagern • Verstellmöglichkeit des vertikalen (VTA) und horizontalen Abtastwinkels (Azimut) • Satinierter Acrylplattenteller und Edelstahl-Tellerlagerachse mit Teflon-Lagerspiegel in Messinglaufbuchse • Integrierte Motorsteuerung (Sinusgenerator, wie in der Speed Box) • Gummibedämpfte Aluminiumkegelfüße Ausstattungsmerkmale: • Montierter MM-Tonabnehmer Ortofon 2M Red • Tonarm Pro-Ject 8.6c • Elektronische Geschwindigkeitswahl für 33 und 45 U/Min • Mechanische Geschwindigkeitswahl für 78 U/Min • Optoelektronische Endabschaltung • Anschlussterminal mit vergoldeten Cinch-Buchsen • Staubschutzhaube im Lieferumfang • Chassis in anthrazit-grauem Pianolack Technische Daten: Montierter TonabnehmerOrtofon 2M Red VerstärkeranschlussPhono MM Geschwindigkeiten33 / 45/ 78 U/Min Elektronische Geschwindigkeitswahl33 / 45 U/Min Mechanische Geschwindigkeitswahl78 U/Min Staubschutzhaubeja Anschlussterminal mit Cinch-Buchsenja Aluminiumkegelfüße mit Kautschukelement bedämpftja TonarmPro-Ject 8.6c Tonarm mit Karbonfaserrohr und Saphirlagernja Effektive Tonarmlänge218,5mm (8,6) Effektive Tonarmmasse8,7g Überhang18,5mm Mitgeliefertes Gegengewicht fürTonabnehmergewicht 7 - 12g Optionales Gegengewicht fürTonabnehmergewicht 4 - 7g Auflagekraft10 - 30mN Max. Geschwindigkeitsabweichung±0,5% Max. Gleichlaufschwankungen±0,1% Max. Rumpeln-70dB Plattenteller Gewicht/Durchmesser0,9kg/300mm NetzanschlussSteckernetzteil, 220 - 240V/50Hz Ausgangsspannung16V/500mA AC Leistungsaufnahme10W Maße (Staubschutzhaube offen)415 x 365 x 405mm Maße (Staubschutzhaube geschlossen)415 x 118 x 320mm Gewicht5,5kg

Pro-Ject 1 Xpression Turntable/vinyl record Player. Comes from house clearance. No dust cover Untested. Some cuffs and scratches on it. Grab a bargain Selling for spares/repairs No return allowed

This is a brand new Pro-Ject Acryl-It Platter Upgrade for Debut Carbon Debut III and 1-Xpression Carbon Turntables. I purchased this several years ago from Acoustic Sounds and never even had the chance to get it out of the original packaging when I had to move and ended up staying with my vintage AR-XA turntable. The platter has been stored ever since. Free USPS ground shipping. Functional and easy to use sound improvement! Suitable for Debut and 1Xpression Upgrade your Debut or 1Xpression turntable to „Esprit“-standards. Made from acrylic with satinised surface Brings a more liquid sound that leaves no space for platter resonances. Substitutes metal platter Put your record directly on the acrylic surface, with nothing in between.

Pro-Ject 1Xpression Mk2 Turntable Complete with Ortofon Cartridge & Acrylic Mat.. Time has come to sell on my much admired Pro-Ject 1Xpression Mk2 turntable, to part-finance an upgrade to an X1 or X2. Purchased new from AudioT here in Cardiff, this is my first decent turntable...! In excellent condition throughout, with no blemishes worth mentioning, apart from the almost inevitable and commonplace nick in plinth paintwork (see photo) from the cover ‘crashing’ down whilst re-adjusting the hinges, despite my best efforts over time to ensure this wouldn’t happen to me - could be touched up with matt grey hobby paint, or covered with small, self adhesive cushion pads...!? Used only by myself and sparingly, so no wear & tear or breakages to be concerned with - the plastic lid will have the usual light swirl marks from dusting and wiping clean. Fitted with its original Ortofon cartridge, which has seen little use, having been swapped out for an Ortofon 2M Bronze and has the heavier counterweight to accommodate the additional weight of this series of cartridges. Comes with all original/standard accessories, paperwork and box. Also included is an acrylic mat which effectively dampens any resonance or ringing from low frequency feedback or the metal platter. I’ll set it up so it’s ready to go: arm height and vertical tracking (azimuth), tracking force, et cetera. Will be double boxed to preserve original packaging, sent securely and fully insured - collection welcome, or even delivery for petrol money in lieu of postage, if you’re not too far away and concerned about its safety. Any questions or queries are welcome and thanks for looking.

Pro-ject 1 Xpression 111 turntable Anthracite (Grey). Condition is Used. Dispatched with Royal Mail Special Delivery (TM) 1:00 pm.

Pro-ject 1Xpression 111 Turntable. Colour Anthracite (Grey) Ortofon 510 cartridge with flip down guard. Tracking at 1.6 grams. 2Kgs Alloy platter and thick rubber mat. 45 RPM adapter, speed change key, allen key for azimuth adjustment, already done. Spare belt, Cone support discs for the 3 adjustable cone feet. Interconnect cable with earth ground wire, instructions. Plinth has a small chip to the front right corner and no other marks. See picture 12. Dust cover perfect. Will be well packaged and double boxed.

Follow us| Sign up for our newsletter Pro-Ject 1 Xpression III Belt Drive Turntable w Manual + Sumiko Olympia MM Cart For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Pro-Ject 1 Xpression III Details & Testing Notes Cosmetic Condition:9/10: Excellent - light use, no visible imperfectionsFunctional Notes:Functions as intended and sounds great.Voltage:120V 60HzSerial #:7269Original Box:NoManual:YesPower Cord:Power SupplyAdditional Items:Sumiko Olympia Moving Magnet CartridgeShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International)Shipping Weight (lbs):15 (22x18x10) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1436 (GS 9.0.5 (1436))

Pro-Ject 1-Xpression III Comfort Ich verkaufe hier einen Pro-Ject 1-Xpression III Comfort Plattenspieler. Der Plattenspieler wird verkauft, da ich auf einen Pro-Ject X2 umgestiegen bin. Der Plattenspieler wurde im Jahr 2020 gekauft und befindet sich in einem neuwertigen, gepflegten Zustand. Der Inhalt/Zubehör ist komplett. Der Plattenspieler wird mit montierten Transportsicherungsschrauben, zerlegt im Originalkarton verschickt. Beschreibung:Manueller Plattenspieler mit montiertem Tonabnehmer Ortofon 2M Red, elektronischer Geschwindigkeitsumschaltung und Endabschaltung Technik für den guten Klang: • Tonarm mit Karbonfaserrohr und Saphirlagern • Verstellmöglichkeit des vertikalen (VTA) und horizontalen Abtastwinkels (Azimut) • Satinierter Acrylplattenteller und Edelstahl-Tellerlagerachse mit Teflon-Lagerspiegel in Messinglaufbuchse • Integrierte Motorsteuerung (Sinusgenerator, wie in der Speed Box) • Gummibedämpfte Aluminiumkegelfüße Ausstattungsmerkmale: • Montierter MM-Tonabnehmer Ortofon 2M Red • Tonarm Pro-Ject 8.6c • Elektronische Geschwindigkeitswahl für 33 und 45 U/Min • Mechanische Geschwindigkeitswahl für 78 U/Min • Optoelektronische Endabschaltung • Anschlussterminal mit vergoldeten Cinch-Buchsen • Staubschutzhaube im Lieferumfang • Chassis in anthrazit-grauem Pianolack Technische Daten: Montierter TonabnehmerOrtofon 2M Red VerstärkeranschlussPhono MM Geschwindigkeiten33 / 45/ 78 U/Min Elektronische Geschwindigkeitswahl33 / 45 U/Min Mechanische Geschwindigkeitswahl78 U/Min Staubschutzhaubeja Anschlussterminal mit Cinch-Buchsenja Aluminiumkegelfüße mit Kautschukelement bedämpftja TonarmPro-Ject 8.6c Tonarm mit Karbonfaserrohr und Saphirlagernja Effektive Tonarmlänge218,5mm (8,6) Effektive Tonarmmasse8,7g Überhang18,5mm Mitgeliefertes Gegengewicht fürTonabnehmergewicht 7 - 12g Optionales Gegengewicht fürTonabnehmergewicht 4 - 7g Auflagekraft10 - 30mN Max. Geschwindigkeitsabweichung±0,5% Max. Gleichlaufschwankungen±0,1% Max. Rumpeln-70dB Plattenteller Gewicht/Durchmesser0,9kg/300mm NetzanschlussSteckernetzteil, 220 - 240V/50Hz Ausgangsspannung16V/500mA AC Leistungsaufnahme10W Maße (Staubschutzhaube offen)415 x 365 x 405mm Maße (Staubschutzhaube geschlossen)415 x 118 x 320mm Gewicht5,5kg

Pro-Ject 1Xpression Mk2 Turntable Complete with Ortofon Cartridge & Acrylic Mat.. Time has come to sell on my much admired Pro-Ject 1Xpression Mk2 turntable, to part-finance an upgrade to an X1 or X2. Purchased new from AudioT here in Cardiff, this is my first decent turntable...! In excellent condition throughout, with no blemishes worth mentioning, apart from the almost inevitable and commonplace nick in plinth paintwork (see photo) from the cover ‘crashing’ down whilst re-adjusting the hinges, despite my best efforts over time to ensure this wouldn’t happen to me - could be touched up with matt grey hobby paint, or covered with small, self adhesive cushion pads...!? Used only by myself and sparingly, so no wear & tear or breakages to be concerned with - the plastic lid will have the usual light swirl marks from dusting and wiping clean. Fitted with its original Ortofon cartridge, which has seen little use, having been swapped out for an Ortofon 2M Bronze and has the heavier counterweight to accommodate the additional weight of this series of cartridges. Comes with all original/standard accessories, paperwork and box. Also included is an acrylic mat which effectively dampens any resonance or ringing from low frequency feedback or the metal platter. I’ll set it up so it’s ready to go: arm height and vertical tracking (azimuth), tracking force, et cetera. Will be double boxed to preserve original packaging and sent securely - collection welcome, or even delivery for petrol money in lieu of postage, if you’re not too far away and concerned about its safety. Any questions or queries are welcome and thanks for looking.

Pro-Ject 1 Xpression Turntable project expression carbon Sold for spare or repairs Dose not turn when powered Not sure what it needs . Please see attached photos for more details. Thanks

Pro-ject 1-Xpression Carbon Classic. Nuovo aperto montato per la foto, completo di testina e puntina 2 M silver, trazione a cinghia, braccio in carbonio, piatto in sandwich di alluminio e elastomero, 3 piedini conici regolabili, listino 700 euro.