SANSUI G-2000 G-3000 Vintage Stereo Receiver Power and Speakers Switch Knob Part 5319140 1101840 This series of parts were pulled from a beautiful unit whose power transformer, had gone out. All other parts of this machine are very nice and fully functional. Please view the photos carefully as this is the exact part that you will receive. This parts fits the G-2000 and G 3000 series. This may also fit other models, but I cannot be certain . Please do your research prior to your purchase. Please note in the photos there are some mild abrasions around the face surface of this piece. As usual, if you have any questions, don’t hesitate to contact me. I will do my best to answer them. I am usually fairly quick to respond.

Tested and cleaned everything works as it should! What you see is what you get! Three speakers Receiver Speaker wire Remote

Biete diesen Prospekt über den Sansui 2000X Receiver deutsche Sprache , 2 Seiten 1Blatt , Gebrauchtzustand , auf der Rückseite alle technische Daten und Foto DIN-A4 , gelocht , keine Nebengerüche ! , neuerdings mit Kaffeefleck, deshalb auch nochmals im Preis gesenkt..... Privatverkauf ohne Garantie , shipping in EU. Countrys 4,50 , alle anderen Länder 8,-€ nicht versichert.

Sansui G-2000 & G-3000 Receiver F-2707 Board & Selector Switch Tape Monitor Mode and FM Muting Switches Please examine the photos carefully. This is a board that was pulled from a working unit. The unit had no mechanical issues with the exception of a little static in the volume switch. This is an excellent value for anyone rebuilding or trying to find parts for these beautiful machines. Among the many parts that are on this board are included the following: Selector Switch Knob 5319140 Tape Monitor Switch 113-1060 Please do your research. As you probably know these parts fit other machines as well. Please note that the FM tuning assembly intact minus the cord. If you need the cord, please contact me prior to ordering.

Sansui 2000A Stereo Receiver bass Treble Potentiometer lot of 2.

SANSUI G-2000 G-3000 Vintage Stereo ReceiverSelector Switch Knob 5319140 1101840 This series of parts were pulled from a beautiful unit whose power transformer, had gone out. All other parts of this machine are very nice and fully functional. Please view the photos carefully as this is the exact part that you will receive. This parts fits the G-2000 and G 3000 series. This may also fit other models, but I cannot be certain . Please do your research prior to your purchase. Please note in the photos there are some mild abrasions around the face surface of this piece. As usual, if you have any questions, don’t hesitate to contact me. I will do my best to answer them. I am usually fairly quick to respond.

This is a vintage Sansui 30 watt per channel stereo receiver made from 1969-1971. The original list price was $300.00, according to the Blue Book. This unit is super clean inside and out. I tested it and it sounds great. All lights and controls function properly. The tuner is very sensitive and picks up stations clearly that I cant get on other receivers. Most of the receivers that came out in the 1960s were very well engineered and built to last, also very heavy! Notice in the photos the steel separators between the amp section and front end which prevent hum being picked up by the tuner section. This will be professionally packed and shipped by my FedEx shipper who specializes in shipping vintage audio gear.

Vintage Sansui 2000x Receiver Solid State Stereo Amplifier Tuner **WORKS GREAT**. If interested, message me and I will send a link to a YouTube video to show you how well it works. https://youtu.be/sczL5fuGeE0 * * * * * FAST SHIPPING FROM ARKANSAS* * * * *

Offered for your consideration is the faceplate removed from a Sansui Solid State 200 receiver, c.1970. Please review the photos and measurements I’ve presented to decide if this nicely-preserved faceplate is correct for your needs. This faceplate is in clean, near excellent condition with no scratches, dings, or meaningful detractions. Its made of brushed aluminum with tinted Plexiglas window and surrounding black enamel and measures 15¾” wide x 4½” tall. Plus, all of the lettering and indices are crisp. I gave it just a light cleaning before taking the photos and it presents very nicely with just some typical finger marks at the tuning and selector openings. A detailing with some metal polish would really make it shine. Lastly, I’m including the four (4) small retention screws in case any of yours have gone missing. This is a great find if the faceplate on your Sansui Solid State 200 is damaged or heavily worn and will have your classic receiver looking as good as it sounds once again! So, as pictured and described, this Sansui 200 faceplate is offered at a reasonable price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $11.95 for very carefully packed shipping via U.S. Postal Service or FedEx with tracking and delivery confirmation. International purchases shipped by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the above photo is presented only for donor model reference

Biete diesen Prospekt über den Sansui 2000X Receiver deutsche Sprache , 2 Seiten 1Blatt , Gebrauchtzustand , auf der Rückseite alle technische Daten und Foto DIN-A4 , gelocht , keine Nebengerüche ! , neuerdings mit Kaffeefleck, deshalb auch nochmals im Preis gesenkt..... Privatverkauf ohne Garantie , shipping in EU. Countrys 4,50 , alle anderen Länder 8,-€ nicht versichert.

SANSUI 2000 STEREO AMPLIFIER RECEIVER *AS IS* doesnt turn on. Has only two feet please see pictures

This is a vintage Sansui 30 watt per channel stereo receiver made from 1969-1971. The original list price was $300.00, according to the Blue Book. This unit is super clean inside and out. I tested it and it sounds great. All lights and controls function properly. The tuner is very sensitive and picks up stations clearly that I cant get on other receivers. Most of the receivers that came out in the 1960s were very well engineered and built to last, also very heavy! Notice in the photos the steel separators between the amp section and front end which prevent hum being picked up by the tuner section. This will be professionally packed and shipped by my FedEx shipper who specializes in shipping vintage audio gear.

Sansui 2000 receiverRated at 40Watts This unit has a black metal outer case with very nice paintFront faceplate all in nice conditionAll the backlights works except: FM stereo indicator and a couple? lamps behind radio band displayAll original knobs and switches are in good shapeFully tested:This unit works and produces nice soundCleaned the pots once with De-Oxit fader lube to loosen them up after sittingTape monitor switch may need another cleaning ***The main power switch is stuck in the ON position - sometimes it works and sometimes it is finnicky - needs a replacement which is easily obtanium*** This is being sold as parts or repair for this reason

This is a vintage Sansui 30 watt per channel stereo receiver made from 1969-1971. The original list price was $300.00, according to the Blue Book. This unit is super clean inside and out. I tested it and it sounds great. All lights and controls function properly. The tuner is very sensitive and picks up stations clearly that I cant get on other receivers. Most of the receivers that came out in the 1960s were very well engineered and built to last, also very heavy! Notice in the photos the steel separators between the amp section and front end which prevent hum being picked up by the tuner section. This will be professionally packed and shipped by my FedEx shipper who specializes in shipping vintage audio gear.

Selling my old Sansui Solid State Model 2000 stereo receiver/Amp. Everything works on it. Cleaned the pots and selector switches. Clean signal no scratching. Selling as is.

Vintage Sansui Model 2000 Solid State AM/FM Stereo Receiver WORKS Needs Service. The receiver turns on and sounds pretty good. All the knobs are problematic and need to be lubricated and generally serviced. This is a storage locker fine and has not been touched in many many years.

Vintage Sansui 2000x Receiver Solid State Stereo Amplifier Tuner **NOT WORKING**. Fairly inexpensive rebuild kits are available here on ebay but I cannot find the time to rebuild this.Message me here if interested and let me send a YouTube link where I explain what is happening with it.The short story is that there is no sound coming out.You can see in the pics that it IS receiving.So, the most likely scenario is that the capacitors need to be replaced.Be prepared. Since this is a heavy unit (about 50 LBS?) the shipping will be high. *** FAST SHIPPING FROM ARKANSAS ***On Jul-23-23 at 11:45:38 PDT, seller added the following information: NOTE: I am selling this receiver on behalf of a friend trying to clear his storage unit. I have just been informed that RCA jacks need to be connected between the pre output and the main input to acquire sound. I unboxed it and ran this test. YES! IT IS FULLY FUNCTIONAL! If you would like to see an updated video about this, please message me.

This is a vintage Sansui 30 watt per channel stereo receiver made from 1969-1971. The original list price was $300.00, according to the Blue Book. This unit is super clean inside and out. I tested it and it sounds great. All lights and controls function properly. The tuner is very sensitive and picks up stations clearly that I cant get on other receivers. Most of the receivers that came out in the 1960s were very well engineered and built to last, also very heavy! Notice in the photos the steel separators between the amp section and front end which prevent hum being picked up by the tuner section. This will be professionally packed and shipped by my FedEx shipper who specializes in shipping vintage audio gear.

Sansui 2000A Stereo Receiver Fuse caps with fuse set of 3

Biete diesen Prospekt über den Sansui 2000X Receiver deutsche Sprache , 2 Seiten 1Blatt , Gebrauchtzustand , auf der Rückseite alle technische Daten und Foto DIN-A4 , gelocht , keine Nebengerüche ! , neuerdings mit Kaffeefleck, deshalb auch nochmals im Preis gesenkt..... Privatverkauf ohne Garantie , shipping in EU. Countrys 4,50 , alle anderen Länder 8,-€ nicht versichert.