You are bidding on eight brand new (New Old Stock) American made 3/4” high feet that are also a perfect fit for many brands such as Marantz, McIntosh, Sansui, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. These are the perfect size replacement feet for Marantz separate components and receivers (and many other brands), but are much better quality! A box of these 3/4 high American made feet was found at an old high-end Audio Service Center that went out of business. They are the exact same material and brand of feet that McIntosh audio equipment has used for over 50 years, but these are not the exact same height as the McIntosh feet (which were either 5/8” high or 1” high). These 3/4” high black feet are in like new condition and will include the three most common size screws that will fit Marantz, McIntosh, most Sansui items, and many of the other vintage audio brands. (a total of 24 screws will be included, 8 Metric thread, 8 American thread, and 8 Machine thread). These will be the correct length screws for these feet. The feet measure 3/4” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $5.00 anywhere in the U.S.A. Thank you.

Rare Vintage Sansui A-80 Stereo Integrated Amplifier Amp HiFi Separate - MM/MC.

You are bidding on a very high quality collection of over 3,400 classic audio photographs on a USB Flash Thumb Drive (or CD if preferred). This auction is only for the over 3,400 vintage audio photos on the Flash Thumb Drive (or CD), not the actual audio equipment shown in the photos. (If the Flash Drive option is chosen, the buyer will receive over 400 additional photos at no extra cost, which were added after the CD was manufactured) The photos shown above are examples to show the quality of the thousands of images on the Flash Thumb Drive or Compact Disc. I have been a collector of high-end audio equipment for over 50 years and have accumulated these high quality color images over the years from many different sources. I have also personally attended over 100 different national audio trade shows (such as CES, Cedia, and Audiokarma), and was able to photograph many vintage audio items at these trade shows. This basically is “The History of Audio thru photos”. I’ve spent many hundreds of hours personally editing this entire collection of photos. Included are most of the classic items from companies such as McIntosh, Marantz, Audio Research, Fisher, Crown, JBL, Klipsch, Scott, B&W, Dynaco, Heathkit, SAE, Harman Kardon, Phase Linear, Thorens, Garrard, Leak, Quad, Nakamichi, Teac, Kenwood, Pioneer, Sansui, Technics, Akai, Sony, Revox, Bang & Olufsen, as well as hundreds of other companies. You get photos of the classic Receivers, Amplifiers, Preamps, Tuners, Speakers, Turntables, Tape Decks, Equalizers, and much more. On all of these items I show the front shot, and on many I also add the rear shot, and sometimes even include the inside electronics with the covers removed. Most of these are very high quality images and should be invaluable to the audio enthusiast. I’ve listed these in alphabetical order by brand, and then by category (amplifier, preamp, tuner, receiver, turntable, speaker, tape deck, etc....), then by model number. I’ve even done the research and listed the year when each of these items were first manufactured. Even though Ive spent hundreds of hours on this project, I have decided to price this at only $34.95 including Priority Mail shipping charges anywhere in the USA. This CD or USB Flash Thumb Drive will be carefully packed in a well padded Priority Mail box to assure a safe arrival. Please feel free to email me with any questions. Please keep in mind that no actual audio components are included with this auction, only all the wonderful photos. Thanks again.

Price shows for One each, not for a Pair. Since the transfer of the SANSUI transformer to Hashimoto, which was carried out in 1978, was a complete transfer including technical materials and design engineers, Hashimoto Electric Co., Ltd. owns all the know-how of the SANSUI transformer for Audio amplifier. Specification Manufacturer : Hashimoto ElectronicsPart Number: HM-7 Primary Impedance: Primary series connection: 12 ohm(7-40ohm) (23dB), Primary parallel connection: 3ohm (2-7ohm) (29dB)Secondary Load Impedance: 2.7Kohm Recommended 47KohmFrequency Flatness: 10-80KHz ( -1dB) see Figure attachedInsertion Loss: 2.3dBShape: WE-60LMass : 0.5KgDimensions(mm): H:55, h:15, A:58, a:40, B:52, b:40, D(?mm):29 Screw dimensions: M3 Contents: 1pcs

Since the transfer of the SANSUI transformer to Hashimoto, which was carried out in 1978, was a complete transfer including technical materials and design engineers, Hashimoto Electric Co., Ltd. owns all the know-how of the SANSUI transformer for Audio amplifier. Specification Manufacturer : Hashimoto ElectronicsPart Number: HM-3 Step-up ratio (gain): Primary series connection/20 times (26 dB), Primary parallel connection/40 times (32 dB)Shape: WE-60LMass (kg): 0.5Dimensions(mm): H:55, h:15, A:58, a:40, B:52, b:40, D(?mm):29 Screw dimensions: M3Maximum Withstand voltage: AC250V, 1 minuteInsulation resistance (M?): 100 or more (at 250 VDC) Frequency characteristics: 15-50kHz(-1dB) (Secondary load resistance 4.7K?)Load resistance (Secondary load resistance): (Rating) 4.7K, (Recommended) 47KImpedance (?): (Primary series connection) 12/(Primary parallel connection) 3Insertion loss (dB): 1.5Contents: 1pcs

MC cartridge step-up Transformer Assembly kit All electrical parts are including a pair of Step-up Transformers (Hashimoto HM-7) Case: Takachi TD10-15-4N with machining and painting. 2.5t (mm) Aluminum Diecast. Parts: refer to bellow BOM. Machining Made to order: It takes 30 days to be shipped after receiving order. A pair of Hashimoto HM-7 is included. (Refer to ) Qty Parts Number Manufacturer Spec CON1 1 T10 Sato Parts Terminal J1-4 4 AJ-320 Amtrans RCA Jack SW1,SW3 2 M-2042 NKK 4PDT SW2, SW4 2 M-2022 NKK DPDT Case 1 TD10-15-4N Takachi Foot 4 AFS25-10B Takachi ?25 X H10mm Screw 4 M4 T1, T2 2 HM-3 Hashimoto MC Step-up Trans.

MC cartridge step-up Transformer Assembly kit All electrical parts are including a pair of Step-up Transformers (Hashimoto HM-3) Case: Takachi TD10-15-4N with machining and painting. 2.5t (mm) Aluminum Diecast. Parts: refer to bellow BOM. Machining Made to order: It takes 30 days to be shipped after receiving order. A pair of Hashimoto HM-3 is included. (Refer to MC Cartridge Step up input Transformer. HM-3 Hashimoto (Reprint of Sansui) | eBay ) Qty Parts Number Manufacturer Spec CON1 1 T10 Sato Parts Terminal J1-4 4 AJ-320 Amtrans RCA Jack SW1,SW3 2 M-2042 NKK 4PDT SW2, SW4 2 M-2022 NKK DPDT Case 1 TD10-15-4N Takachi Foot 4 AFS25-10B Takachi ?25 X H10mm Screw 4 M4 T1, T2 2 HM-3 Hashimoto MC Step-up Trans.

MC cartridge step-up Transformer Assembly kit All electrical parts are including a pair of Step-up Transformers (Hashimoto HM-X) Case: Takachi TD10-15-4N with machining and painting. 2.5t (mm) Aluminum Diecast. Parts: refer to bellow BOM. Machining Made to order: It takes 30 days to be shipped after receiving order. A pair of Hashimoto HM-X is included. (Refer to https://www.ebay.com/itm/393511032329 ) Qty Parts Number Manufacturer Spec CON1 1 T10 Sato Parts Terminal J1-4 4 AJ-320 Amtrans RCA Jack SW1,SW3 2 M-2042 NKK 4PDT SW2, SW4 2 M-2022 NKK DPDT Case 1 TD10-15-4N Takachi Foot 4 AFS25-10B Takachi ?25 X H10mm Screw 4 M4 T1, T2 2 HM-X Hashimoto MC Step-up Trans.

Price shows for One each, not for a Pair. Since the transfer of the SANSUI transformer to Hashimoto, which was carried out in 1978, was a complete transfer including technical materials and design engineers, Hashimoto Electric Co., Ltd. owns all the know-how of the SANSUI transformer for Audio amplifier. Specification Manufacturer : Hashimoto ElectronicsPart Number: HM-X Primary Impedance: Primary series connection: 12 ohm(7-40ohm) (23dB), Primary parallel connection: 3ohm (2-7ohm) (29dB)Secondary Load Impedance: 2.7Kohm Recommended 47KohmFrequency Flatness: 15-100KHz ( -1dB) see Figure attachedInsertion Loss: 1.5dBShape: WE-60LMass : 0.5KgDimensions(mm): H:55, h:15, A:58, a:40, B:52, b:40, D(?mm):29Screw dimensions: M3 Contents: 1pcs

You are bidding on eight brand new (New Old Stock) American made 3/4” high feet that are also a perfect fit for many brands such as Marantz, McIntosh, Sansui, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. These are the perfect size replacement feet for Marantz separate components and receivers (and many other brands), but are much better quality! A box of these 3/4 high American made feet was found at an old high-end Audio Service Center that went out of business. They are the exact same material and brand of feet that McIntosh audio equipment has used for over 50 years, but these are not the exact same height as the McIntosh feet (which were either 5/8” high or 1” high). These 3/4” high black feet are in like new condition and will include the three most common size screws that will fit Marantz, McIntosh, most Sansui items, and many of the other vintage audio brands. (a total of 24 screws will be included, 8 Metric thread, 8 American thread, and 8 Machine thread). These will be the correct length screws for these feet. The feet measure 3/4” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $5.00 anywhere in the U.S.A. Thank you.