SUGDEN R21 STERIO FM TUNER, English Oak Sleeve, Beautiful, has some very small marks but nothing to bad for age please check pictures. Its in fully working condition and sounds absolutely comes with power cable. Shipping with ups 48 hour fully insured International shipping welcome but please only through ebay International shipping Collection more then welcome from london penge se207. Please check my other hifi items

Connoisseur Sugden SAU-2 Tonearm In Fair Condition. It’s a beautiful arm that I had wanted to install but I don’t have the time. Problems are: - no cable. 5 pin din cable required - the arm lift has had a small crack but it seems to have been glued back - the arm collar screw feels in tight and I can’t undo it. Someone else may have better luck From Vinylengine: The SAU2 is a bit like a classic car : you wouldnt expect it to out-perform todays models, but its great fun to use anyway! Starting at the sharp end, the plastic headshell simply isnt a good design. Its a slide-on friction-fit to the tonearm, and mine was quite loose, cured for now by wrapping a bit of scotch tape round the tonearm shaft but thats hardly a permanent solution. Within the body of the headshell theres a slide-out plug which takes the cartridge leads on pins at one end and plugs into the tonearm at the other. The space enclosing it is so constricted that normal cartridge leads are squashed together and short out. The plug looks eminently meltable so I ruled out soldering leads directly to the pins. I had to source some ultra-thin cartridge clips and make a piece of plastic shielding to fit between them. The slot-holes taking the cartridge mount bolts arent very long, hence not much room for adjustment, and I found it impossible to get a good alignment with some cartridges. At the other end, theres no counterweight calibration dial for the tracking force so it has to be set with a guage or digital scale. The distinctly odd 45-degree offset gimbal arrangement is commendably friction-free and seems to work OK : the trick to getting the headshell to stay horizontal while on the record is to point the outer gimbal at the centre of the playing surface where the needle sets down, and then set the tonearm height so as to be exactly horizontal in the playing position. It does look distinctly strange to see it tilt when you lift it off, though. The anti-skate seems to function as it should, its never an exact science anyway. The base of the tonearm shaft takes a 5-pin male plug which isnt easy to find. I eventually got a suitable Cardas model from e-bay and made up a tonearm lead. Get an SAU2 with a lead if you can! Despite its odd features the SAU2 actually works quite well. I put it through some basic tracks on test records and whilst it didnt excel, it didnt disgrace itself either. Probably a near-match for the Pioneer PL12D tonearm as a reference point. For the music I listen to on a day-to-day basis (fairly mainstream pop/rock/blues/prog/folk from the 60s and 70s) its absolutely fine : I suspect its limitations would become apparent with more demanding classical orchestral music and such-like. It has some character and a nice 50s/60s vintage vibe about it, and Im enjoying using it with an AT91 on a Connoisseur BD1 turntable.

Connoisseur Sugden SAU-2 Tonearm In Fair Condition. It’s a beautiful arm that I had wanted to install but I don’t have the time. Problems are: - no cable. 5 pin din cable required - the arm lift has had a small crack but it seems to have been glued back - the arm collar screw feels in tight and I can’t undo it. Someone else may have better luck From Vinylengine: The SAU2 is a bit like a classic car : you wouldnt expect it to out-perform todays models, but its great fun to use anyway! Starting at the sharp end, the plastic headshell simply isnt a good design. Its a slide-on friction-fit to the tonearm, and mine was quite loose, cured for now by wrapping a bit of scotch tape round the tonearm shaft but thats hardly a permanent solution. Within the body of the headshell theres a slide-out plug which takes the cartridge leads on pins at one end and plugs into the tonearm at the other. The space enclosing it is so constricted that normal cartridge leads are squashed together and short out. The plug looks eminently meltable so I ruled out soldering leads directly to the pins. I had to source some ultra-thin cartridge clips and make a piece of plastic shielding to fit between them. The slot-holes taking the cartridge mount bolts arent very long, hence not much room for adjustment, and I found it impossible to get a good alignment with some cartridges. At the other end, theres no counterweight calibration dial for the tracking force so it has to be set with a guage or digital scale. The distinctly odd 45-degree offset gimbal arrangement is commendably friction-free and seems to work OK : the trick to getting the headshell to stay horizontal while on the record is to point the outer gimbal at the centre of the playing surface where the needle sets down, and then set the tonearm height so as to be exactly horizontal in the playing position. It does look distinctly strange to see it tilt when you lift it off, though. The anti-skate seems to function as it should, its never an exact science anyway. The base of the tonearm shaft takes a 5-pin male plug which isnt easy to find. I eventually got a suitable Cardas model from e-bay and made up a tonearm lead. Get an SAU2 with a lead if you can! Despite its odd features the SAU2 actually works quite well. I put it through some basic tracks on test records and whilst it didnt excel, it didnt disgrace itself either. Probably a near-match for the Pioneer PL12D tonearm as a reference point. For the music I listen to on a day-to-day basis (fairly mainstream pop/rock/blues/prog/folk from the 60s and 70s) its absolutely fine : I suspect its limitations would become apparent with more demanding classical orchestral music and such-like. It has some character and a nice 50s/60s vintage vibe about it, and Im enjoying using it with an AT91 on a Connoisseur BD1 turntable.

The Fusion 21 is designed to compliment both the A21 and A21SE Signature integrated amplifiers. Utilising a high speed transport mechanism and on board memory, the Fusion 21 is a technically advanced CD player. To reduce jitter and control errors during play back there is a dedicated transceiver circuit, this re-formats data prior to the digital to analogue converter.A unique conversion method is employed without oversampling or filtering in the digital domain, instead we chose an analogue filter allowing a very wide bandwidth.Important as technology is in the digital domain, the potential can only be realised if the analogue output is capable of producing a high quality sound. The use of a class A output stage and trans-impedance amplifier ensures superb sound. A useful additional feature of the Fusion 21 is a digital input. This allows the connection of an eternal source like a music streamer or AV component.Perfect working order and has been serviced which included fitting a new belt. Cosmetic condition: Does have a few marks/scratches but is in good condition overall. Comes without remote but can be operated without. Comes with the power lead.430 x 330 x 110 WDH (mm)Photos:Please have a good look at the photos as they are of the actual item for sale unless otherwise stated and will give you a good idea of the item condition. They will also show you any included accessories such as remote control. If the item comes with any accessories or original box it will be included in the photos and item description, if its not then assume it isnt included.Delivery:Free next working day delivery (unless otherwise stated) within mainland UK. For all other destinations, please ask for a delivery quote or use eBays GSP shipping programme. Items will be packaged to a high standard to avoid damage in transit. Returns:Returns accepted within 14 days, the item must be in the same condition as it was prior to original sale. Buyer pays for return delivery costs. Items not as described:If you receive your item and feel the item is not a described, please get in touch so that we can work together to resolve the issue. Please give us the chance to put it right before leaving feedback because sometimes issues cant be avoided but we always strive to ensure the customer is happy.

Connoisseur Sugden SAU-2 Tonearm In Fair Condition. It’s a beautiful arm that I had wanted to install but I don’t have the time. Problems are: - no cable. 5 pin din cable required - the arm lift has had a small crack but it seems to have been glued back - the arm collar screw feels in tight and I can’t undo it. Someone else may have better luck From Vinylengine: The SAU2 is a bit like a classic car : you wouldnt expect it to out-perform todays models, but its great fun to use anyway! Starting at the sharp end, the plastic headshell simply isnt a good design. Its a slide-on friction-fit to the tonearm, and mine was quite loose, cured for now by wrapping a bit of scotch tape round the tonearm shaft but thats hardly a permanent solution. Within the body of the headshell theres a slide-out plug which takes the cartridge leads on pins at one end and plugs into the tonearm at the other. The space enclosing it is so constricted that normal cartridge leads are squashed together and short out. The plug looks eminently meltable so I ruled out soldering leads directly to the pins. I had to source some ultra-thin cartridge clips and make a piece of plastic shielding to fit between them. The slot-holes taking the cartridge mount bolts arent very long, hence not much room for adjustment, and I found it impossible to get a good alignment with some cartridges. At the other end, theres no counterweight calibration dial for the tracking force so it has to be set with a guage or digital scale. The distinctly odd 45-degree offset gimbal arrangement is commendably friction-free and seems to work OK : the trick to getting the headshell to stay horizontal while on the record is to point the outer gimbal at the centre of the playing surface where the needle sets down, and then set the tonearm height so as to be exactly horizontal in the playing position. It does look distinctly strange to see it tilt when you lift it off, though. The anti-skate seems to function as it should, its never an exact science anyway. The base of the tonearm shaft takes a 5-pin male plug which isnt easy to find. I eventually got a suitable Cardas model from e-bay and made up a tonearm lead. Get an SAU2 with a lead if you can! Despite its odd features the SAU2 actually works quite well. I put it through some basic tracks on test records and whilst it didnt excel, it didnt disgrace itself either. Probably a near-match for the Pioneer PL12D tonearm as a reference point. For the music I listen to on a day-to-day basis (fairly mainstream pop/rock/blues/prog/folk from the 60s and 70s) its absolutely fine : I suspect its limitations would become apparent with more demanding classical orchestral music and such-like. It has some character and a nice 50s/60s vintage vibe about it, and Im enjoying using it with an AT91 on a Connoisseur BD1 turntable.