Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage Audio #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels.Lifter descent speed (Oil refilled).Each adjustment point, operation feeling.Height adjustment, etc. Polished and cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. Overview The universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium that has been further hardened by nitrogen. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?m, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Specifications Type: Universal tone arm with variable dynamic dampingEffective bearing clearance: 30mm both horizontally and verticallyArm pipe: Boron Titanium pipeArm effective length: 250mmArm length range: 322mm to 350mmArm rear length range: 66.5mm - 94.5mmArm height adjustment range: 44mm - 64mm (helicoid part 20mm)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight: 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency: 9.8Hz, (Compliance: 12x10-6cm/dyne, cartridge weight 6.5g, needle pressure 1.25g)Arm resonance sharpness (Q): 6dB or less (at optimum adjustment)Needle pressure adjustment range: 0 to 3gShell weight: 9.5g (boron aluminum)Shell terminal lug: 1.2mm?, lug for 4-pin terminalApplicable cartridge weight: 5g to 10gArm mounting hole diameter: 62mm? Accessories WeightsWeight fixing screwHead shell (Technics)Lead wireMounting nut/washerPHONO cableInstruction Manual (copy)(Japanese)Installation gauge (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Technics EPA-100 Braccio pickup universale con smorzamento dinamico Audio vintage n. 4 Domo Arigato! Benvenuto, grazie per la tua visita. Descrizione Operazione confermata con i seguenti contenuti. Uscita da entrambi i canali.Velocità di discesa del sollevatore (Rifornimento olio).Ogni punto di regolazione, sensazione di funzionamento.Regolazione dellaltezza, ecc. Lucidato e pulito in ogni sua parte.Laspetto è un bellissimo prodotto senza graffi evidenti. Si prega di fare riferimento alla foto. Panoramica Il braccio universale è stato sviluppato per risolvere il problema principale dello smorzamento della risonanza a bassa frequenza nei sistemi di pickup. Il meccanismo di smorzamento dinamico variabile è in grado di smorzare adeguatamente le risonanze a bassa frequenza sia di tipo ad alta che a bassa compliance, esaltando tutto il potenziale della cartuccia. Il peso principale è diviso e supportato da una molla su un lato, e galleggia sullaltro lato grazie alla forza di attrazione tra due magneti posizionati uno di fronte allaltro nella parte posteriore del peso e del selettore di smorzamento. La risonanza del peso viene smorzata da olio siliconico viscoso e da un cilindro di smorzamento, smorzando efficacemente la risonanza dellintero sistema di pickup e riducendo con successo la risonanza a meno della metà rispetto ai sistemi convenzionali. La frequenza di risonanza del peso principale può essere regolata con il selettore di smorzamento sul retro del peso principale in base alla conformità della cartuccia, e la quantità di frenata può essere impostata su un valore appropriato. Il tubo del braccio, con diametro esterno di 9,5 mm e spessore di 0,5 mm, è realizzato con un braccio in nitruro di titanio, realizzato in titanio leggero e meccanicamente resistente, ulteriormente indurito dallazoto. La struttura di supporto del braccio è realizzata in tubo di nitruro di titanio. Sia la sezione di rotazione orizzontale che quella verticale del braccio sono supportate da un sistema di sospensione cardanica che utilizza cuscinetti con cuscinetti girevoli ad alta precisione prodotti internamente. Gli assi di rotazione orizzontale e verticale si intersecano in un unico punto, riducendo al minimo le differenze nella sensibilità iniziale e nella sensibilità in tutte le direzioni di rotazione. I rubini, il cui coefficiente di attrito è circa 1/3 di quello dellacciaio, vengono superfiniti in sfere con una sfericità di ±0,5?m e vengono utilizzati 20 rubini.In combinazione con il sistema di sospensione cardanica, raggiunge unelevata sensibilità iniziale di 5 mg. Specifiche Tipo: braccio universale con smorzamento dinamico variabileGioco effettivo dei cuscinetti: 30 mm sia in orizzontale che in verticaleTubo del braccio: tubo al boro titanioLunghezza effettiva del braccio: 250 mmIntervallo di lunghezza del braccio: da 322 mm a 350 mmIntervallo di lunghezza posteriore del braccio: 66,5 mm - 94,5 mmIntervallo di regolazione dellaltezza del braccio: 44 mm - 64 mm (parte elicoidale 20 mm)Sporgenza: 15 mmAngolo di errore di tracciamento orizzontale: +1°6(circonferenza interna del record da 30 cm), +2°6(circonferenza esterna del record da 30 cm)Sensibilità dellasse di rotazione: sensibilità orizzontale, verticale, iniziale 5 mgPeso effettivo del braccio: 22 g (peso morto della cartuccia 6,5 g, pressione dellago 1,25 g)Frequenza di risonanza del braccio: 9,8 Hz, (Conformità: 12x10-6 cm/dyne, peso cartuccia 6,5 g, pressione ago 1,25 g)Nitidezza della risonanza del braccio (Q): 6 dB o meno (con regolazione ottimale)Intervallo di regolazione della pressione dellago: da 0 a 3 gPeso del guscio: 9,5 g (alluminio boro)Capocorda terminale a guscio: 1,2 mm?, capocorda per terminale a 4 pinPeso della cartuccia applicabile: da 5 g a 10 gDiametro del foro di montaggio del braccio: 62 mm? Accessori PesiVite di fissaggio del pesoGuscio della testa (Tecnica)Cavo principaleDado/rondella di montaggioCavo FONOManuale di istruzioni (copia)(giapponese)Calibro di installazione (copia) Spedizione La spedizione è disponibile solo per lindirizzo registrato su eBay. La spedizione è entro Fedex O SME. Spedizione gratuita ritorna Politica di restituzione incondizionata Il servizio e la soddisfazione del cliente sono molto importanti per noi.Ho una politica di restituzione incondizionata se notificata entro 30 giorni dalla ricezione dellarticolo. Tutti gli articoli restituiti devono essere nella condizione originale.Tutte le richieste di reso devono essere effettuate entro 30 giorni dal ricevimento dellarticolo. Per favore contattami prima per il reso prima di rispedirmelo.Le spese di spedizione della merce restituita sono a carico dellacquirente. Acquirenti internazionali Notare che:I dazi doganali, le tasse e le spese non sono inclusi nel prezzo dellarticolo o nelle spese di spedizione.Queste spese sono a carico dellacquirente.Si prega di verificare con lufficio doganale del proprio paese per determinare quali saranno questi costi aggiuntivi prima dellofferta/acquisto.Queste spese vengono normalmente riscosse dalla società di spedizione (spedizione) o al momento del ritiro dellarticolo: non confonderle con spese di spedizione aggiuntive.Non contrassegniamo i valori della merce al di sotto del valore né contrassegniamo gli articoli come regali: le normative governative statunitensi e internazionali vietano tale comportamento. Mi dispiace, ma non possiamo organizzarlo perché è illegale in Giappone.Grazie.

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage Audio #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels.Lifter descent speed (Oil refilled).Each adjustment point, operation feeling.Height adjustment, etc. Polished and cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. Overview The universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium that has been further hardened by nitrogen. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?m, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Specifications Type: Universal tone arm with variable dynamic dampingEffective bearing clearance: 30mm both horizontally and verticallyArm pipe: Boron Titanium pipeArm effective length: 250mmArm length range: 322mm to 350mmArm rear length range: 66.5mm - 94.5mmArm height adjustment range: 44mm - 64mm (helicoid part 20mm)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight: 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency: 9.8Hz, (Compliance: 12x10-6cm/dyne, cartridge weight 6.5g, needle pressure 1.25g)Arm resonance sharpness (Q): 6dB or less (at optimum adjustment)Needle pressure adjustment range: 0 to 3gShell weight: 9.5g (boron aluminum)Shell terminal lug: 1.2mm?, lug for 4-pin terminalApplicable cartridge weight: 5g to 10gArm mounting hole diameter: 62mm? Accessories WeightsWeight fixing screwHead shell (Technics)Lead wireMounting nut/washerPHONO cableInstruction Manual (copy)(Japanese)Installation gauge (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Technics DVD A-10. Audio/Video Player. Open Box R33/B

DescriptionOperation verified.Please check photos for condition. Phono cable not includedShipping Fedex,DHL,Japan Post *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.Read more... Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

Tested and workingPlease see pictures. Feel free to ask any questions!Please note that on any listings involving antiques/collectibles that we do the “bare minimum” on cleaning and only use a paper towel and water. The reason for this is so that the item does not get damaged, stained, looses paint/color, etc. There are items listed that do need cleaned a bit more, but we prefer to leave that to the buyer. Thank you for understanding and Good Luck!*FREE SHIPPING ON ALL LISTINGS/AUCTIONS UNLESS OTHERWISE NOTED* MAKE SURE YOUR ADDRESS IS UPDATED AND CORRECT*It is against eBay policy to ship to any address that is not what you have on file or where ever you requested to have it shipped when you purchased/checked out, doing so voids eBay/PayPal buyer/seller warranties.If you order a product and it gets shipped to a wrong address because you failed to update or provide the correct shipping address you can try to contact the post office, supply them with the tracking number (which will be uploaded when your order ships) and request they forward it to your new address (you can also request they return to sender (us) in which case will issue a full refund). We can not take responsibility for any problems that can occur from a buyer providing incorrect shipping addresses. Orders placed on Friday may not ship until Monday. Feedback:We Strive for Fives! There is no reason to give anyone negative feedback. We handle all items with extreme delicacy and package very carefully for shipping. If there is a problem and you are unsatisfied please email us first so we can rectify ANY problem and have a successful online selling experience. _gsrx_vers_1516 (GS 9.3 (1516))

Véritable Goyard Saint Louis PM Blanc Blanc GOYARD Description TECHNICS Numéro de modèle : SP-15/SH-15B1/EPA-100 Date de sortie du tourne-disque 1979 Paiement Veuillez payer dans les 5 jours après lachat Expédition Mondial!! Durée dexpédition Expédition MéthodeAsieAmérique du Nord Amérique centrale Moyen-Orient UA, NZLEurope ? RussieAmérique du Sud Afrique SME3 - 6 jours4 - 6 jours4 - 6 jours4 - 6 jours Traçabilité et assurance par Air Express Delivery Conditions de vente Garantie de remboursement sous 30 jours en cas de retour par le client. Le retour est accepté pendant 30 jours. À propos de nous Commander plus dun article ?? Nous pouvons combiner votre expédition et économiser votre argent !! Si vous ne trouvez pas les articles que vous recherchez dans notre magasin, Nhésitez pas à nous contacter!! Nous confirmerons si larticle est en stock et nous vous informerons dès que possible. Jai hâte de faire affaire avec vous!! Merci de votre visite dans notre magasin!! Acheteurs internationaux - Veuillez noter : Les droits dimportation, les taxes et les frais ne sont pas inclus dans le prix de larticle ou les frais dexpédition. Ces charges sont sous la responsabilité de lacheteur. Veuillez vérifier auprès du bureau de douane de votre pays pour déterminer quels seront ces coûts supplémentaires avant denchérir/acheter. Ces frais sont normalement perçus par la société de livraison de fret (expédition) ou lorsque vous récupérez larticle - ne les confondez pas avec des frais dexpédition supplémentaires.

Echter Goyard Saint Louis PM Weiß Weiß GOYARD Beschreibung TECHNICS Modellnummer: SP-15/SH-15B1/EPA-100 Plattenspieler Erscheinungsdatum 1979 Zahlung Bitte zahlen Sie innerhalb von 5 Tagen nach dem Kauf Versand Weltweit!! Versanddauer Versand MethodeAsienNordamerika Zentralamerika Naher Osten AU, NZEuropa RusslandSüdamerika Afrika EMS3 - 6 Tage4 - 6 Tage4 - 6 Tage4 - 6 Tage Rückverfolgbar und versichert per Air Express-Lieferung Verkaufsbedingungen Geld-zurück-Garantie innerhalb von 30 Tagen bei Rückgabe durch den Kunden. Die Rückgabe wird 30 Tage lang akzeptiert. Über uns Bestellen Sie mehr als 1 Artikel?? Wir können Ihren Versand kombinieren und Ihr Geld sparen!! Wenn Sie die von Ihnen gesuchten Artikel nicht in unserem Shop finden, Sie können uns gerne kontaktieren!! Wir bestätigen Ihnen, ob der Artikel vorrätig ist, und informieren Sie so schnell wie möglich. Ich freue mich darauf, mit Ihnen Geschäfte zu machen!! Vielen Dank für Ihren Besuch in unserem Shop!! Internationale Käufer – Bitte beachten Sie: Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden. Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.

Item Description Condition : USED Very GoodOutput from both channelsLifter descent speed (oil replenished)Adjustment points, operating feel, etc.Height adjustment, etc.There is no problem in operation. AccessoriesWeightWeight fixing screwsHead shell (Technics)Lead wireMounting nut/washerPHONO cableInstruction manual (copy)Installation gauge (copy) Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Vintage Technics SA-103 FM/AM Stereo Receiver in Silver Tested SEE VIDEO DEMO. This item is used, but in overall good working condition. There are some minor blemishes and scratches from prior ownership and use on the surface of the item. Please refer to pictures. The receiver has been tested and cleaned and works as advertised. Please refer to demo video link below, so you can see it in action and all the testing that was done. See Video Demo Below https://youtu.be/2A-hjlBMtlQ

Vintage Technics Booklet Receivers SA-80 SA-1000 Turntable Amplifer Speakers.

Technics Se St ca-1080 SL Rs ca-1060 hifi Separates amplifier cd tape tuner. In fabulous condition Consists SE-CA1080 amplifier ST-CA1080 stereo tuner SL-CA1060 CD deck RS-CA1060 twin cassette deck Pair of original technics speakers With connecting ribbon cables. All tested and working well. Remote control included. Please see pictures as reference Will be posted with parcelforce 48h Thanks for viewing

Description*Please see the photos and buy only if you are satisfied with the item.If you have any concerns about the product, please contact us directly.ShippingItem will be shipped via FEDEX.Please allow 5 business days for handling time.Shipping from Japan.It takes approximately 4 to 7 days for the product to arrive it is shipped.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

Technics SA-103 Stereo Receiver front panel. This listing is for one aluminum front panel from a Technics SA-103 stereo receiver. Item is in used condition. Some wear is evident. See photos for details.

Technics SA-101L FM/MW/LW Stereo Tuner Amplifier Looks Great And Sounds Excellent Owned From New And Very Well Looked After Volume, Bass & Treble Controls Operate Very Smoothly With No Crackles Excellent Reception From The Tuner Case And Controls In Great Shape Being A Used Item There Will Be Some Minor Signs Of Usage So Please Look Carefully At The Photos For Condition The Amplifier Will Be Very Well Packed And You Will Receive It Exactly As Seen In The Photos Overall An Excellent Vintage Tuner Amplifier From Technics Which Looks And Sounds Superb International Buyers Please Contact Us For An Accurate Shipping Quote

Item Description Condition : USED Very Good Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Up for sale is Technics SA-101 Vintage AM/FM Stereo Receiver.Tested Working Condition, Only AM Band Won’t Work.Some Scratches & Marks On Case, Please Looking the Pictures.Sorry, Not Ship it to Hawaii, Alaska & Puerto Rico.Should you have any further question, please feel free to contact me. Thanks.

DescriptionDiscounts are available for multiple purchases.Please contact us by message if you wish to purchase more than one item.If you have any Japanese items that you would like to purchase, please contact us.?Please contact me if you find any items cheaper than my listing.I will sell it at the lowest price.I will accept offers to lower the price, so please contact me.?????????????????????????????????????Used. Sound output from both channels has been checked. It is a beautiful product with few scratches and stains. Various adjustments can be made smoothly.Includes Technics SH-100S headshell and phono cable. Arm: GoodArm lifter: Good ShippingShips within 2-10 days maximum after purchase.For remote areas, additional charges will apply.Additional charges will be communicated later.This price includes the tracking number fee, please message us if you are purchasing multiple copies.Economy Shipping with Tracking NumberStandard shipping by FedEx, DHL, Yamato Transport or Japan PostInternational Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage Audio #3 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed.The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. Overview The universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium that has been further hardened by nitrogen. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?m, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Specifications Type: Universal tone arm with variable dynamic dampingEffective bearing clearance: 30mm both horizontally and verticallyArm pipe: Boron Titanium pipeArm effective length: 250mmArm length range: 322mm to 350mmArm rear length range: 66.5mm - 94.5mmArm height adjustment range: 44mm - 64mm (helicoid part 20mm)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight: 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency: 9.8Hz, (Compliance: 12x10-6cm/dyne, cartridge weight 6.5g, needle pressure 1.25g)Arm resonance sharpness (Q): 6dB or less (at optimum adjustment)Needle pressure adjustment range: 0 to 3gShell weight: 9.5g (boron aluminum)Shell terminal lug: 1.2mm?, lug for 4-pin terminalApplicable cartridge weight: 5g to 10gArm mounting hole diameter: 62mm? Accessories All accessories are shown in the photos. Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as ?gifts? -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Condition DescriptionNo noticeable scratches are seen and it is in a beautiful state with gloss. The genuine shell is also glossy and good. The cable has a slight fray on the cloth coating, No major damage is seen. Considering the aging, we judge it as a beautiful item. We have confirmed the operation with our equipment. ? Output from both channels ? Lifter descent speed (oil replenished) ? Each adjustment point, operation feeling ? Height adjustment, etc. There is no problem in operation. accessories ·weight ? Weight fixing screw ? Mounting nut / washer ? Head shell (Technics) ? PHONO cable ? Instruction manual (copy) ? Mounting gauge ? Bundled Items All you can see on the picture will be included in a set of a package. Please refer to the pictures for more details. Please check the pictures and dont hesitate to ask any questions about the item. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Technics SA-1010 P mount turntable cassette magazine ad. 3 pages, 4 sides. From the October 83 issue of Audio Magazine. It is an original. In good condition. Safely packed, we do include a stiff cardboard insert, the insert and ad wrapped with saran wrap and a Please Do Not Bend sticker on the envelope to help preserve the integrity of the ad.

Technics EPA-100 EPA-100mk2 Sub-Counterweight 50g Turntable Parts Gold JapanDescriptionAbout This ItemsTechnics Tone ArmEPA-100EPA-100mk2EPA-100PNProduction sub weight 50gAppearance?????????????????Please put appearance descriptions here.ConditionUsedVery GoodThe brass color gives it a luxurious feel.Because the work is made by hand, lathe marks and chuck scratches may appear on the surface. Please understand that there is a possibility that lathe marks and chuck scratches may appear on the product. Please understand.Included ItemsSub-weight, non-turnover (M4 screw)Protective tape includedShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Technics SA-103 Stereo Receiver knob and button set. This listing is for one set of knobs from a Technics SA-103 stereo receiver. Includes tuning, power, bass/treble/balance knobs. Items are used.