Arcam AVR 600 7.1 Heimkino Verstärker - TOP ZUSTAND. Verkaufe einen sehr tollen Heimkino-Receiver aus Nichtraucherhaushalt. Bis auf 3D Tonformate kann er alle aktuelle Tonformate wiedergeben. 4K Bildinhalte schleift er durch (Netflix ect). Hat also HDMI 2.0b als Standard. Der AVR-600 ist sehr gepflegt worden und hat keine Kratzer, Verfärbungen oder sonstiges. Der Verstärker hat richtig Power und spielt super musikalisch. Kenner wissen, was das Gerät kann. :-)Läuft aktuell tadellos mit einer Nvidia Shield Pro, Dune HD und Panasonic Player als Zuspieler.Zubehör ist dabei: - Einmess-Mikrofon - Fernbedienung - Original Karton Alles in Top-Zustand.

Working great! The only defects are a slight dent on the top (see pictures) and sometimes the 6 button on the remote sticks. Other than that this thing is a beauty!! The AVR600 AV receiver represents a tour-de-force of Arcam’s design skill and technical prowess. While most receivers are designed to provide an overwhelming list of specifications but are short on outright performance, the AVR600 is focused on the complete experience. Never before has an AV receiver delivered such a fine balance of state of the art sound and video processing backed up by an all encompassing technical specification. The AVR600’s discrete styling hides a huge seven channel, 120wpc power amplifier and some of the most advanced audio and video processing ever seen in a high performance AV receiver. Fully equipped for the high definition world, the AVR600 decodes the very latest Dolby Digital+, Dolby TrueHD, DTS High Resolution Audio and DTS-HD Master Audio streams with phenomenal precision. With well over 100 input, output and control connections, from simple analogue I/O to high speed HDMI, the AVR600 is fully equipped to deal with the most demanding of home cinema systems or custom installations. Sources such as DVD, Blu-Ray, set-top boxes, iPods® and games machines are all accommodated with ease. Using 6 layer PCBs and ultra high precision digital audio and video circuits, the internal design of the AVR600 is the culmination of thousands of man-hours of research and development work by Arcam’s world-class design team and represents the largest project ever completed by the company

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED! This Arcam FMJ AVR600 home theater receiver is being sold for parts or repair. With HDMI, 7.1 channels and 120 watts of power, it is a high-quality piece of equipment that could potentially be restored to working condition with the right expertise. It includes 5 inputs, 2 outputs, and supports various audio formats including DTS, Dolby Pro Logic and Dolby Digital. It also has banana speaker jacks for audio output and is compatible with DVD-audio. The receiver is a model Arcam AVR 600 from the brand Arcam.

SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED! This Arcam FMJ AVR600 home theater receiver is being sold for parts or repair. With HDMI, 7.1 channels and 120 watts of power, it is a high-quality piece of equipment that could potentially be restored to working condition with the right expertise. It includes 5 inputs, 2 outputs, and supports various audio formats including DTS, Dolby Pro Logic and Dolby Digital. It also has banana speaker jacks for audio output and is compatible with DVD-audio. The receiver is a model Arcam AVR 600 from the brand Arcam.

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

Arcam AVR-600 HDMI Black 120 watts x 7 channel Theater Receiver. Full working order. Fantastic sound. Selling because i have two of them, bought another to get one in better condition. So in full working order and only issues: - originally had some scratches on front but i repaired them. Looks great but you can tell slightly close up. - does get warm ( but does not switch off at all due to overheating) - a humming sound when turned on, only notice when not playing music. Comes with original power cable. No remote but can access all menus via buttons or program a harmony remote (which i did).

Arcam AVR-600 HDMI Black 120 watts x 7 channel Theater Receiver. Full working order. Fantastic sound. Selling because i have two of them, bought another to get one in better condition. So in full working order and only issues: - originally had some scratches on front but i repaired them. Looks great but you can tell slightly close up. - does get warm ( but does not switch off at all due to overheating) - a humming sound when turned on, only notice when not playing music. Comes with original power cable. No remote but can access all menus via buttons or program a harmony remote (which i did).

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

Arcam AVR-600 - Used With Remote and Cord. Great condition. This unit was awesome. So sorry to see it go. It powered incredibly sounding Sonos Faber speakers for many years. I had to upgrade as it doesnt support 4K. Unit was tested on May 28, 2023 -is working - but may not contain most recent firmware. User is fully responsible and is sold as is. Unit is heavy and buyer must sign for delivery and pay for shipping including insurance. All claims from shipping must go through shipper. Remote will come without battery. Unit was tested for operability on May 29, 2023 - see pictures with input showings and for item conditions.

Arcam AVR-600 - Used With Remote and Cord. Great condition. This unit was awesome. So sorry to see it go. It powered incredibly sounding Sonos Faber speakers for many years. I had to upgrade as it doesnt support 4K. Unit was tested on May 28, 2023 -is working - but may not contain most recent firmware. User is fully responsible and is sold as is. Unit is heavy and buyer must sign for delivery and pay for shipping including insurance. All claims from shipping must go through shipper. Remote will come without battery. Unit was tested for operability on May 29, 2023 - see pictures with input showings and for item conditions.

HDMI not working all other audio is working. Comes with remote

Arcam AVR-600 - Used With Remote and Cord. Great condition. This unit was awesome. So sorry to see it go. It powered incredibly sounding Sonos Faber speakers for many years. I had to upgrade as it doesnt support 4K. Unit was tested on May 28, 2023 -is working - but may not contain most recent firmware. User is fully responsible and is sold as is. Unit is heavy and buyer must sign for delivery and pay for shipping including insurance. All claims from shipping must go through shipper. Remote will come without battery. Unit was tested for operability on May 29, 2023 - see pictures with input showings and for item conditions.

Arcam AVR-600 - Used With Remote and Cord. Great condition. This unit was awesome. So sorry to see it go. It powered incredibly sounding Sonos Faber speakers for many years. I had to upgrade as it doesnt support 4K. Unit was tested on May 28, 2023 -is working - but may not contain most recent firmware. User is fully responsible and is sold as is. Unit is heavy and buyer must sign for delivery and pay for shipping including insurance. All claims from shipping must go through shipper. Remote will come without battery. Unit was tested for operability on May 29, 2023 - see pictures with input showings and for item conditions.