Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

Arcam FMJ AV9 Preamp Processor. In good condition however volume control on the amp itself works sometimes On the remote works perfect Hence priced accordingly Few others here 500£ plus

arcam amplifier fmj AVR390 4K 7.1ch Receiver. Very good bit of kit comes with remote and power cable , no box

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

arcam amplifier fmj AVR390 4K 7.1ch Receiver. Come with original box and all accessories Almost new condition AVR390 Offering a level of sound quality that is far above competing receivers, these AVRs are audiophile products by any measure. Equally at home with high resolution surround sound or two-channel music, they deliver stunning realism with everything from heavy- weight blockbusters to your favourite concert video. Further enhancing the performance of the new AVR390, AVR550 & AVR850, Arcam has also included the very latest room correcting technology from Dirac Research. Dirac Live® for Arcam gives the dealer the ability to tune the acoustic performance of the system to any room situation giving the listener the best possible experience in their own home. Together with Arcam’s legendary amplifier technology, Dolby Atmos & DTS:X deliver captivating sound that places and moves audio anywhere in the room, including overhead, to bring entertainment alive all around the audience. Whether you are listening to music, movies, television shows or playing your favourite video games, Dolby Atmos & DTS:X deliver the full impact of the entertainment experience. Note: for a 7.1.4 system, an additional 4-channel amplifier (or two 2-channel power amplifiers) is required. Both video and audio stages are designed to embrace both current and upcoming technologies. HDMI2.0a with HDCP2.2 4K “Ultra HD” and 3D video capability are built in. An internal tuner provides a fully integrated FM / DAB / DAB+ (in appropriate markets) radio solution. Worldwide access to internet radio stations is provided through the network connection, which also interfaces to UPnP audio servers. The USB port supports memory devices. Control is possible via Ethernet, enabling it to be fully integrated with whole house control systems, or via the iOS MusicLife UPnP/control app. RS232, 12V triggers and standard IR control are also included. The AVR390, AVR550 & AVR850 are designed in the UK.