Arcam BDP100 Blu-Ray Player. I am reluctantly selling the main digital source from my system - but I just don’t have the room for it anymore and find myself either streaming or playing LP’s. I have been using this almost exclusively as a high end CD player which it is ideally suited to, especially paired with a good DAC. Oh - and it plays DVDs and Blu-Rays. I don’t think the reviews at the time praised it too much on the video side of things, but was always a solid audio player. Built like a brick outhouse. Comes with original box, packaging, remote and instructions plus power cable. Read the brief below from Arcam. This is a 100% Australian delivered model. Region B Blu-ray and Region 4 DVD. Is in great overall condition with the exception of an small annoying scratch near the logo on the bottom LHS of front panel. See photo. Using Arcam’s unique expertise has allowed the extraction of the very best video and audio performance from a digital source. The BDP100 uses a very simple, almost direct video path from the disc right through to its high precision outputs. This very direct path allows the video signal to be presented without unnecessary disruption giving a presentation that will truly captivate the viewer. Using broadcast quality digital video clocks during the process means the resulting picture quality is simply stunning. To ensure the BDP100’s music performance meets the same “reference” standards the class-leading Wolfson Audio 8741 digital to analogue converter (DAC) is used. This device, coupled with a linear phase Bessel output filter and high precision re-clocking system results in an audio performance comparable to a dedicated audiophile CD player. Even the BDP100’s power supply has been specially designed for outright performance. Discreet sub-regulated power supplies on the drive, audio and DAC boards deliver significant benefits to the overall performance of each element and thus allow each section to work truly independently and without interference. To minimise the effect of radio frequencies (RF) from interfering with the BDP100’s high performance circuitry the Arcam development team have used its “Mask of Silence” techniques to shield important signal paths. The difference this technology makes is significant and is unique to Arcam. As with all its FMJ units, Arcam has gone to incredible lengths to maximise the performance of this new player. As an example the BDP100 benefits from a critically damped cover to virtually eliminate damaging microphonic vibration from reaching the sensitive electronics inside. In addition, while other Blu-ray devices can suffer from slow disc load times, the BDP100 has been optimised to make the journey from disc insertion to playback as fast as possible. The BDP100 is designed with a single purpose; to deliver the very best music and movie experience for discerning owners. It also features a full suite of discrete IR and RS232 codes making it perfect for integration within a high performance home cinema installation. TECHNICAL SPECIFICATIONS Audio Outputs HDMI (v1.3a) Coaxial digital (RCA Phono) Optical digital (Toslink) Zone 1 analogue (RCA Phono) Zone 2 analogue (RCA Phono) Output Level (0DBFS): 2.2VRMS THD+N (0dBFS, 1kHz, 22Hz to 22kHz, unweighted): 0.002% Video Outputs HDMI (v1.3a) – inc. Deep Color Component video (3x RCA Phono) Composite video (RCA Phono) Compatibility Disc types:- Blu-Ray Disc (BD) including BD Live, DVD-Video, DVD-R, DVD-RW, CD-Audio (CDDA), CD-R, CD-RW Codec Support Dolby TrueHD DTS Master Audio MP3 - Sample rate 44.1kHz, 48kHz, Bit rate up to 320kbps WMA - Sample rate 44.1kHz, 48kHz, Bit rate up to 192kbps JPEG - Maximum resolution 4272x2848 pixels AVI - Codec Xvid, Image size 1920x1080 @30fps WMV - Codec WMV9 Image size 1920x1080 @30fps Custom Install Features RC-5 remote input Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt trigger Full duplex RS232 control input for more complex control systems General Supplied with remote control Large, high contrast dimmable VFD front panel display Universal mains power supply (100-240v) Size – 435mm (17.1in) wide, 400mm (15.7) deep, 100mm (3.9in) high Weight 6.2kg (13.7lbs) nett, 10.0kg (22.0lbs) packed

Arcam P1Designed as a no-compromise solution for audio and AV systems, the FMJ P1 monobloc Power Amplifier is the ideal partner for the forthcoming C31 Preamplifier or the FMJ processors.The P1 is the ultimate expression of Arcam’s ultra wide bandwidth power amp design, built to take full advantage of the latest high resolution audio formats such as SACD for two stereo music and Dolby TrueHD and DTS Master Audio form home cinema. Its extremely low noise and distortion, together with a wider audio bandwidth mean the P1 is ready for the challenge of these newer formats with a total harmonic distortion of just 0.003%.The flagship P1 is unquestionably a class leading power amplifier. Its circuit design is elegant and innovative and uses plated through circuit boards with surface mounted components. The whole amplifier is dc coupled from input to output with absolutely no capacitors in the signal path. The power supply is built around a substantial toroidal transformer, giving a continuous output power of more than 170 watts per channel into 8 ohms and 250 watts into 4 ohms. The power amplifier has a fully symmetrical high current output stage and novel current feedback loop which dramatically reduces harmonic distortion. Put simply, the P1’s technical specification is state of the art.TECHNICAL SPECIFICATIONSPower amplifier features175wpc continuous power output (8ohms, one channel driven)250wpc continuous power output (4ohms, 1kHz, one channel driven)Fully discrete transistor power amp stages with temperature compensationCurrent feedback design ensuring wide bandwidth for high resolution audioBalanced (XLR) and unbalanced (RCA Phono) inputAll DC coupled signal path for enhanced bass controlTwin RCA Phono input for loop through to second power ampPower supply featuresMassive toroid mains transformerUser switchable between 115v and 230v mains suppliesDual rectified power amp supplies for reduced ground noiseGeneral FeaturesAll gold plated input / output connectorsSize – 430mm (17) wide, 370mm (14) deep, 110mm (4.2) highWeight 12.5kg (27.5lbs) nett, 15.4kg (33.9lbs) packed Note: This is a SINGLE mono-block amplifier, NOT stereo amplifier.

Arcam P1Designed as a no-compromise solution for audio and AV systems, the FMJ P1 monobloc Power Amplifier is the ideal partner for the forthcoming C31 Preamplifier or the FMJ processors.The P1 is the ultimate expression of Arcam’s ultra wide bandwidth power amp design, built to take full advantage of the latest high resolution audio formats such as SACD for two stereo music and Dolby TrueHD and DTS Master Audio form home cinema. Its extremely low noise and distortion, together with a wider audio bandwidth mean the P1 is ready for the challenge of these newer formats with a total harmonic distortion of just 0.003%.The flagship P1 is unquestionably a class leading power amplifier. Its circuit design is elegant and innovative and uses plated through circuit boards with surface mounted components. The whole amplifier is dc coupled from input to output with absolutely no capacitors in the signal path. The power supply is built around a substantial toroidal transformer, giving a continuous output power of more than 170 watts per channel into 8 ohms and 250 watts into 4 ohms. The power amplifier has a fully symmetrical high current output stage and novel current feedback loop which dramatically reduces harmonic distortion. Put simply, the P1’s technical specification is state of the art.TECHNICAL SPECIFICATIONSPower amplifier features175wpc continuous power output (8ohms, one channel driven)250wpc continuous power output (4ohms, 1kHz, one channel driven)Fully discrete transistor power amp stages with temperature compensationCurrent feedback design ensuring wide bandwidth for high resolution audioBalanced (XLR) and unbalanced (RCA Phono) inputAll DC coupled signal path for enhanced bass controlTwin RCA Phono input for loop through to second power ampPower supply featuresMassive toroid mains transformerUser switchable between 115v and 230v mains suppliesDual rectified power amp supplies for reduced ground noiseGeneral FeaturesAll gold plated input / output connectorsSize – 430mm (17) wide, 370mm (14) deep, 110mm (4.2) highWeight 12.5kg (27.5lbs) nett, 15.4kg (33.9lbs) packed Note: This is a SINGLE mono-block amplifier, NOT stereo amplifier.