Weitere Suchvorschläge:

Amazon Amazon | arcam fmj-p7 (11) | arcam fmj-p 7 (11) | arcam fmj p777 (13) | arcam fmj av888 (34) | arcam fmj p38 (37) | arcam fmj p25 3 (41) |

Arcam FMJ P7 7-Channel Power Amplifier -NEXT DAY FAST SHIP

Ende: 27.12. 2023 17:16:14 am Mittwoch
  • Zustand: Gebraucht
  • Preis: 817.44 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 295814580028
  • Verkäufer: whitehorse-technical (1885|98.5%)
  • Verkäufertyp: Gewerblich
  • Ort: Bath Großbritannien
  • Versand nach: Worldwide
  • Versandkosten: 52,59 EUR
  • bei ebay

Arcam FMJ P7 Seven Channel Power Amplifier; Black

Ende: 26.12. 2023 19:14:15 am Dienstag
  • Zustand: Gebraucht
  • Preis: 1006.35 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 225592841624
  • Verkäufer: tmraudio (12581|99.7%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Erie, Colorado USA
  • Versand nach: US
  • Versandkosten: 98,99 EUR
  • bei ebay

ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier With Original Box

Ende: 25.12. 2023 15:31:03 am Montag
  • Zustand: Gebraucht
  • Preis: 735.09 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 235349737502
  • Anzahl Gebote: 0
  • Verkäufer: retro-vintage-antique-classic_toys (80|0.0%)
  • Verkäufertyp: Privat
  • Ort: Union, Kentucky USA
  • Versand nach: Worldwide
  • Versandkosten: EUR
  • bei ebay

ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier With Original Box

Ende: 18.12. 2023 16:07:55 am Montag
  • Zustand: Gebraucht
  • Preis: 735.09 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 235339334363
  • Anzahl Gebote: 0
  • Verkäufer: retro-vintage-antique-classic_toys (80|0.0%)
  • Verkäufertyp: Privat
  • Ort: Union, Kentucky USA
  • Versand nach: Worldwide
  • Versandkosten: EUR
  • bei ebay
  • Beschreibung

    Condition: Used. Everything works, sounds excellent. Cosmetics are very good. Minor blemishes, as pictured. One careful owner. Purchased new for $4000+ 115V ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier; Silver The ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener. A completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 microfarads of storage capacitance, fed from a total of 14 individual windings on the P7s two massive 1500VA toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its fully rated continuous output power of 150 watts into 8 ohms or 230 Watts in 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the P7 has ultra low distortion together with exceptional dynamic range and transient response. The P7 is a THX Ultra2 specified 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It will complement the performance of any high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the P7 to ensure it will look stunning in your home installation. The P7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers. As the P7 amplifier is capable of delivering over 1.6 Kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminum heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the P7 is equipped with a heavy duty mains a/c cable and socket, coupled to a microprocessor controlled Softstart Sequencer which, to minimize mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the P7 to be remotely switched in and out of standby via a 12-volt trigger input. The microprocessor continuously monitors the condition of each channel, including temperature, output current and DC offset, to ensure correct operation or instant shut-down under fault conditions. THX certified Multi-Channel power amplifier Delivers a massive 150W per channel into 8 Ohms Near perfect channel isolation prevents signal distortion Can be daisy chained for Bi or even Tri-amping Multi-coloured LED display 12V trigger for remote activation What Is Included: Amplifier, Manual, Power cable, Factory packaging Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Specifications: Power output: 150 watts per channel into 8 (all 7 channels) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Gain: 28.3 dB Signal to noise ratio: 122dB Dimensions: 430 x 450 x 180mm Amplifier weight: 31kg

ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier With Original Box

Ende: 11.12. 2023 16:07:25 am Montag
  • Zustand: Gebraucht
  • Preis: 737.23 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 235329271717
  • Anzahl Gebote: 0
  • Verkäufer: retro-vintage-antique-classic_toys (80|0.0%)
  • Verkäufertyp: Privat
  • Ort: Union, Kentucky USA
  • Versand nach: Worldwide
  • Versandkosten: EUR
  • bei ebay
  • Beschreibung

    Condition: Used. Everything works, sounds excellent. Cosmetics are very good. Minor blemishes, as pictured. One careful owner. Purchased new for $4000+ 115V ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier; Silver The ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener. A completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 microfarads of storage capacitance, fed from a total of 14 individual windings on the P7s two massive 1500VA toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its fully rated continuous output power of 150 watts into 8 ohms or 230 Watts in 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the P7 has ultra low distortion together with exceptional dynamic range and transient response. The P7 is a THX Ultra2 specified 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It will complement the performance of any high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the P7 to ensure it will look stunning in your home installation. The P7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers. As the P7 amplifier is capable of delivering over 1.6 Kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminum heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the P7 is equipped with a heavy duty mains a/c cable and socket, coupled to a microprocessor controlled Softstart Sequencer which, to minimize mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the P7 to be remotely switched in and out of standby via a 12-volt trigger input. The microprocessor continuously monitors the condition of each channel, including temperature, output current and DC offset, to ensure correct operation or instant shut-down under fault conditions. THX certified Multi-Channel power amplifier Delivers a massive 150W per channel into 8 Ohms Near perfect channel isolation prevents signal distortion Can be daisy chained for Bi or even Tri-amping Multi-coloured LED display 12V trigger for remote activation What Is Included: Amplifier, Manual, Power cable, Factory packaging Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Specifications: Power output: 150 watts per channel into 8 (all 7 channels) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Gain: 28.3 dB Signal to noise ratio: 122dB Dimensions: 430 x 450 x 180mm Amplifier weight: 31kg

ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier With Original Box

Ende: 09.11. 2023 09:36:14 am Donnerstag
  • Zustand: Gebraucht
  • Preis: 864.97 EUR Auktion
  • Status: verkauft
  • Artikelnummer: 235276019138
  • Anzahl Gebote: 2
  • Verkäufer: retro-vintage-antique-classic_toys (80|0.0%)
  • Verkäufertyp: Privat
  • Ort: Union, Kentucky USA
  • Versand nach: Worldwide
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    Condition: Used. Everything works, sounds excellent. Cosmetics are very good. Minor blemishes, as pictured. One careful owner. Purchased new for $4000+ 115V ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier; Silver The ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener. A completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 microfarads of storage capacitance, fed from a total of 14 individual windings on the P7s two massive 1500VA toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its fully rated continuous output power of 150 watts into 8 ohms or 230 Watts in 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the P7 has ultra low distortion together with exceptional dynamic range and transient response. The P7 is a THX Ultra2 specified 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It will complement the performance of any high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the P7 to ensure it will look stunning in your home installation. The P7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers. As the P7 amplifier is capable of delivering over 1.6 Kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminum heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the P7 is equipped with a heavy duty mains a/c cable and socket, coupled to a microprocessor controlled Softstart Sequencer which, to minimize mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the P7 to be remotely switched in and out of standby via a 12-volt trigger input. The microprocessor continuously monitors the condition of each channel, including temperature, output current and DC offset, to ensure correct operation or instant shut-down under fault conditions. THX certified Multi-Channel power amplifier Delivers a massive 150W per channel into 8 Ohms Near perfect channel isolation prevents signal distortion Can be daisy chained for Bi or even Tri-amping Multi-coloured LED display 12V trigger for remote activation What Is Included: Amplifier, Manual, Power cable, Factory packaging Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Specifications: Power output: 150 watts per channel into 8 (all 7 channels) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Gain: 28.3 dB Signal to noise ratio: 122dB Dimensions: 430 x 450 x 180mm Amplifier weight: 31kg

ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier With Original Box

Ende: 30.10. 2023 09:34:39 am Montag
  • Zustand: Gebraucht
  • Preis: 905.26 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 235261785400
  • Anzahl Gebote: 0
  • Verkäufer: retro-vintage-antique-classic_toys (80|0.0%)
  • Verkäufertyp: Privat
  • Ort: Union, Kentucky USA
  • Versand nach: Worldwide
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    Condition: Used. Everything works, sounds excellent. Cosmetics are very good. Minor blemishes, as pictured. One careful owner. Purchased new for $4000+ 115V ARCAM FMJ P7 7-channel, THX Ultra2 Power Amplifier; Silver The ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener. A completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 microfarads of storage capacitance, fed from a total of 14 individual windings on the P7s two massive 1500VA toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its fully rated continuous output power of 150 watts into 8 ohms or 230 Watts in 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the P7 has ultra low distortion together with exceptional dynamic range and transient response. The P7 is a THX Ultra2 specified 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It will complement the performance of any high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the P7 to ensure it will look stunning in your home installation. The P7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers. As the P7 amplifier is capable of delivering over 1.6 Kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminum heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the P7 is equipped with a heavy duty mains a/c cable and socket, coupled to a microprocessor controlled Softstart Sequencer which, to minimize mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the P7 to be remotely switched in and out of standby via a 12-volt trigger input. The microprocessor continuously monitors the condition of each channel, including temperature, output current and DC offset, to ensure correct operation or instant shut-down under fault conditions. THX certified Multi-Channel power amplifier Delivers a massive 150W per channel into 8 Ohms Near perfect channel isolation prevents signal distortion Can be daisy chained for Bi or even Tri-amping Multi-coloured LED display 12V trigger for remote activation What Is Included: Amplifier, Manual, Power cable, Factory packaging Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Specifications: Power output: 150 watts per channel into 8 (all 7 channels) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Gain: 28.3 dB Signal to noise ratio: 122dB Dimensions: 430 x 450 x 180mm Amplifier weight: 31kg

ARCAM FMJ P7 MULTICHANNEL POWER AMPLIFIER 7 CHANNEL AMP READ DESCRIPTION

Ende: 30.08. 2023 09:18:09 am Mittwoch
  • Zustand: Als Ersatzteil / Defekt
  • Preis: 493.38 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 256198977141
  • Verkäufer: dealcroydon (9144|99.9%)
  • Verkäufertyp: Gewerblich
  • Ort: Canterbury Großbritannien
  • Versand nach: Worldwide
  • Versandkosten: 233,07 EUR
  • bei ebay
  • Beschreibung

    ARCAM FMJ P7 MULTICHANNEL POWER AMPLIFIER 7 CHANNEL AMP READ DESCRIPTIONARCAM FMJ P7 MULTICHANNEL POWER AMPLIFIER 7 CHANNEL AMP READ DESCRIPTION ITEM CODE NUMBER: P125 FOR PARTS OR NOT WORKING CONDITION THE AMP IS FOR PARTS OR NOT WORKING CONDITION, BECAUSE IT HAS GOT BROKEN OUTPUT ON THE BACK SIDE (SEE PHOTO NUMBER 6). IT HAS COSMETIC SIGNS OF USE, SUCH AS SCRATCHES AND DENTS. THERE ARE A FEW MARKS ON THE FRONT SIDE (SEE PHOTOS). IT IS COMING AS SEEN ON THE PHOTOS WITHOUT ANY CONNECTION CABLES AND WITHOUT REMOTE CONTROL, BUT WITH 3 PIN POWER CABLE INCLUDED. PLEASE NOTE, IT IS COMING WITH UK 3 PIN PLUG AND YOU NEED AN ADAPTOR IF YOU ARE GOING TO USE IT OUTSIDE THE UK. PLEASE NOTE, BECAUSE THIS ITEM IS FOR PARTS OR NOT WORKING ORDER RETURNS ARE NOT ACCEPTED.PLEASE NOTE, BECAUSE THE ITEM IS FOR PARTS OR NOT WORKING CONDITION I AM NOT RESPONSIBLE IF ANY FAULTS APPEAR DURING FURTHER TESTS AND RETURNS ARE NOT ACCEPTED.PLEASE MAKE SURE YOU HAVE SEEN ALL PHOTOS BEFORE YOU DECIDE TO BUY IT, BECAUSE YOU WILL RECEIVE IT EXACTLY IN THE SAME CONDITION AS SEEN ON THE PHOTOS. EVERYTHING INCLUDED IN THE LISTING IS CLEARLY SHOWN ON THE PHOTOS. PLEASE NOTE, YOUR ITEM WILL BE DISPATCHED WITH DPD NEXT DAY DELIVERY. THEREFORE, IF YOU PURCHASE AN ITEM UNTIL 1PM DURING WORKING DAYS (MONDAY-FRIDAY) YOUR ITEM WILL DISPATCHED THE SAME DAY AND WILL BE DELIVERED TO YOU ON THE NEXT DAY. IF YOU PURCHASE AN ITEM FROM US AFTER 1PM, YOUR ITEM WILL BE DISPATCHED ON THE NEXT DAY AND WILL BE DELIVERED TO YOU ON THE DAY AFTER. ALL ITEMS PURCHASED AFTER 1PM ON FRIDAY AFTERNOON, WILL BE DISPATCHED ON MONDAY BEFORE 12PM.ALL INTERNATIONAL BUYERS, PLEASE NOTE YOUR ITEM WILL BE DELIVERED TO YOU BETWEEN 4-6 WORKING DAYS. PLEASE, DO NOT HESITATE TO CONTACT ME AND ASK FOR QUOTES FOR POSTAGE CHARGES, AFTER YOU SPECIFY YOUR COUNTRY. ALL INTERNATIONAL BUYERS, PLEASE NOTE, PRODUCTS PURCHASED FROM THE UK ARE SUBJECT TO IMPORT CUSTOM CHARGES. CUSTOM CHARGES ARE DIFFERENT FOR ALL EUROPEAN COUNTRIES, SO PLEASE CALCULATE YOUR CUSTOM CHARGES, BEFORE PURCHASING AN ITEM, TO AVOID ANY MISUNDERSTANDINGS REGARDING THE FINAL PRICE. PLEASE NOTE, OUR PRICES DO NOT INCLUDE CUSTOM CHARGES REQUIRED BY YOUR CUSTOMS. PLEASE NOTE, YOU ARE RESPONSIBLE TO PAY FOR ANY IMPORT CUSTOM CHARGES, IN ORDER TO RECEIVE YOUR ITEM.

Arcam FMJ P7 7-Channel 230V Power Amplifier

Ende: 29.08. 2023 12:24:00 am Dienstag
  • Zustand: Gebraucht
  • Preis: 327.99 EUR Auktion
  • Status: verkauft
  • Artikelnummer: 305090869796
  • Anzahl Gebote: 4
  • Verkäufer: nex2005 (660|94.8%)
  • Verkäufertyp: Privat
  • Ort: Newcastle upon Tyne Großbritannien
  • Versand nach: GB
  • Versandkosten: 38,25 EUR
  • bei ebay
  • Beschreibung

    Arcam DIVA P1000 7-Channel 230V Power Amplifier Unit was purchased lightly used a good few years back and has sat in its box since. Still works. Has minor cosmetic marks and scuffs on it (see pictures). Manufacturer Information: THX certified Multi-Channel power amplifierDelivers a massive 150W per channel into 8 OhmsNear perfect channel isolation prevents signal distortionCan be daisy chained for Bi or even Tri-ampingMulti-coloured LED display12V trigger for remote activation

Arcam FMJ P7 Multichannel Power Amplifier

Ende: 31.07. 2023 22:48:48 am Montag
  • Zustand: Gebraucht
  • Preis: 649.92 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 295836924521
  • Anzahl Gebote: 0
  • Verkäufer: mahed.nic (15|0.0%)
  • Verkäufertyp: Privat
  • Ort: Sacramento, California USA
  • Versand nach: US
  • Versandkosten: 200,0 EUR
  • bei ebay
  • Beschreibung

    Front button cover is missing, but mechanism is in perfect working condition. Used for home theater setup.

Arcam FMJ P7 Multichannel Power Amplifier

Ende: 24.07. 2023 22:48:16 am Montag
  • Zustand: Gebraucht
  • Preis: 689.75 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 295822329210
  • Anzahl Gebote: 0
  • Verkäufer: mahed.nic (15|0.0%)
  • Verkäufertyp: Privat
  • Ort: Sacramento, California USA
  • Versand nach: US
  • Versandkosten: 200,0 EUR
  • bei ebay
  • Beschreibung

    Front button cover is missing, but mechanism is in perfect working condition. Used for home theater setup.

Arcam FMJ P7 Multichannel Power Amplifier

Ende: 17.07. 2023 22:47:00 am Montag
  • Zustand: Gebraucht
  • Preis: 683.56 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 295809906993
  • Anzahl Gebote: 0
  • Verkäufer: mahed.nic (15|0.0%)
  • Verkäufertyp: Privat
  • Ort: Sacramento, California USA
  • Versand nach: US
  • Versandkosten: 200,0 EUR
  • bei ebay
  • Beschreibung

    Front button cover is missing, but mechanism is in perfect working condition. Used for home theater setup.

Arcam FMJ P7 Amplifier 7 Chanel Power Amp

Ende: 30.06. 2023 16:07:19 am Freitag
  • Zustand: Gebraucht
  • Preis: 759.98 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 266305138013
  • Verkäufer: 9799stephen (206|100.0%)
  • Verkäufertyp: Privat
  • Ort: Penrith Großbritannien
  • Versand nach: GB
  • Versandkosten: 20,0 EUR
  • bei ebay
  • Beschreibung

    Arcam FMJ P7 Amplifier 7 Chanel Power Amp. This 7 channel amp speaks for itself as the perfect amplifier for home cinemas or just bi-amping and tri-amping. I bought this 8 years ago as part of my upgrading of my home cinema along but moved from the sticks to a terrace hose so never got to set the full blown system up. The amp is very tidy from the front but came to me with scratched edges which isn’t very visible whilst set in a stack.

ARCAM FMJ P7 7 CHANNEL POWER AMPLIFIER WORKING GOOD CONDITION 150 WPC ON ALL 7CH

Ende: 25.06. 2023 22:13:54 am Sonntag
  • Zustand: Gebraucht
  • Preis: 810.08 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 325708134464
  • Anzahl Gebote: 0
  • Verkäufer: darrenain1 (1459|100.0%)
  • Verkäufertyp: Privat
  • Ort: manchester Großbritannien
  • Versand nach: None
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    ARCAM FMJ P7 MULTI CHANNEL POWER AMPThe ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener.Construction/Design is Class AB amplifier with first 50W in class AA completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 micrfarads of storage capacitance, fed from a total of 14 individual windings on the p7s two massive 1500va toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its full rated continuous output power of 150 Watts into 8 ohms or 230 Watts into 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the p7 is a further development of that used in Arcams award-winning a85 and a32 amplifiers and has ultra low distortion together with exceptional dynamic range and transient response.The p7 is a thx specified, 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It is the perfect partner to the av8 processor, but will also complement the performance of any other high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the p7 to ensure it will look stunning in your home installation. The p7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers.As the p7 amplifier is capable of delivering over 1.6 kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminium heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the p7 is equipped with a heavy duty mains cable and socket, coupled to a microprocessor controlled softstart sequencer which, to minimise mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the p7 to be remotely switched in and out of standby via a 12-volt trigger input.The microprocessor continuously monitors the condition of each channel, including temperature, output current and dc offset, to ensure correct operation or instant shut-down under fault conditions. It also controls a variable-speed cooling fan, for those rare occasions when convection cooling is not enough. The p7 features a beautifully contoured front panel and integral air intake slot, with 7 multicoloured LEDs to show the operating status of each channel. The whole case is made of heavy gauge aluminium, which helps the overall sound quality due to its excellent thermal and non-magnetic properties. Because it weighs over 30 kg, even the p7s feet are made from machined aluminium, complete with easy slide plastic inserts to help with installation.PICK UP ONLY OR I WILL DELIVER IF NOT TO FAR AWAY £15 GREATER MANCHESTER AREA, MESSAGE ME FOR DELIVERYOUTSIDE OF MANCHESTER AND IF WE CAN COME TO AGREEMENT I WILL DELIVER, DELIVERY COST PAID UPFRONT VIAPAYPAL.THX certified Multi-Channel power amplifierDelivers a massive 150W per channel into 8 Ohms 230W per channel into 4 ohmsNear perfect channel isolation prevents signal distortionCan be daisy chained for Bi or even Tri-ampingMulti-coloured LED display12V trigger for remote activationWith high grade power cordAll working as it should

ARCAM FMJ P7 7 CHANNEL POWER AMPLIFIER WORKING GOOD CONDITION 150 WPC ON ALL 7CH

Ende: 25.06. 2023 18:45:01 am Sonntag
  • Zustand: Gebraucht
  • Preis: 815.98 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 225625324966
  • Anzahl Gebote: 0
  • Verkäufer: darrenain1 (1458|100.0%)
  • Verkäufertyp: Privat
  • Ort: manchester Großbritannien
  • Versand nach: None
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    ARCAM FMJ P7 MULTI CHANNEL POWER AMPThe ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener.Construction/Design is Class AB amplifier with first 50W in class AA completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 micrfarads of storage capacitance, fed from a total of 14 individual windings on the p7s two massive 1500va toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its full rated continuous output power of 150 Watts into 8 ohms or 230 Watts into 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the p7 is a further development of that used in Arcams award-winning a85 and a32 amplifiers and has ultra low distortion together with exceptional dynamic range and transient response.The p7 is a thx specified, 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It is the perfect partner to the av8 processor, but will also complement the performance of any other high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the p7 to ensure it will look stunning in your home installation. The p7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers.As the p7 amplifier is capable of delivering over 1.6 kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminium heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the p7 is equipped with a heavy duty mains cable and socket, coupled to a microprocessor controlled softstart sequencer which, to minimise mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the p7 to be remotely switched in and out of standby via a 12-volt trigger input.The microprocessor continuously monitors the condition of each channel, including temperature, output current and dc offset, to ensure correct operation or instant shut-down under fault conditions. It also controls a variable-speed cooling fan, for those rare occasions when convection cooling is not enough. The p7 features a beautifully contoured front panel and integral air intake slot, with 7 multicoloured LEDs to show the operating status of each channel. The whole case is made of heavy gauge aluminium, which helps the overall sound quality due to its excellent thermal and non-magnetic properties. Because it weighs over 30 kg, even the p7s feet are made from machined aluminium, complete with easy slide plastic inserts to help with installation.PICK UP ONLY OR I WILL DELIVER IF NOT TO FAR AWAY £15 GREATER MANCHESTER AREA, MESSAGE ME FOR DELIVERYOUTSIDE OF MANCHESTER AND IF WE CAN COME TO AGREEMENT I WILL DELIVER, DELIVERY COST PAID UPFRONT VIAPAYPAL.THX certified Multi-Channel power amplifierDelivers a massive 150W per channel into 8 Ohms 230W per channel into 4 ohmsNear perfect channel isolation prevents signal distortionCan be daisy chained for Bi or even Tri-ampingMulti-coloured LED display12V trigger for remote activationWith high grade power cordAll working as it should

ARCAM FMJ P7 7 CHANNEL POWER AMPLIFIER WORKING GOOD CONDITION 150 WPC ON ALL 7CH

Ende: 12.06. 2023 19:28:55 am Montag
  • Zustand: Gebraucht
  • Preis: 651.84 EUR Auktion
  • Status: verkauft
  • Artikelnummer: 295749854053
  • Anzahl Gebote: 2
  • Verkäufer: lukasz1294 (581|100.0%)
  • Verkäufertyp: Privat
  • Ort: Crooklands Großbritannien
  • Versand nach: GB
  • Versandkosten: 20,0 EUR
  • bei ebay
  • Beschreibung

    ARCAM FMJ P7 7 CHANNEL POWER AMPLIFIER WORKING GOOD CONDITION 150 WPC ON ALL 7CH.

ARCAM FMJ P7 7 CHANNEL POWER AMPLIFIER WORKING GOOD CONDITION 150 WPC ON ALL 7CH

Ende: 29.05. 2023 22:09:13 am Montag
  • Zustand: Gebraucht
  • Preis: 810.96 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 325673677273
  • Anzahl Gebote: 0
  • Verkäufer: darrenain1 (1447|100.0%)
  • Verkäufertyp: Privat
  • Ort: manchester Großbritannien
  • Versand nach: None
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    ARCAM FMJ P7 MULTI 7 CHANNEL POWER AMPThe ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener.Construction/Design is Class AB amplifier with first 50W in class AA completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 micrfarads of storage capacitance, fed from a total of 14 individual windings on the p7s two massive 1500va toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its full rated continuous output power of 150 Watts into 8 ohms or 230 Watts into 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the p7 is a further development of that used in Arcams award-winning a85 and a32 amplifiers and has ultra low distortion together with exceptional dynamic range and transient response.The p7 is a thx specified, 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It is the perfect partner to the av8 processor, but will also complement the performance of any other high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the p7 to ensure it will look stunning in your home installation. The p7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers.As the p7 amplifier is capable of delivering over 1.6 kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminium heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the p7 is equipped with a heavy duty mains cable and socket, coupled to a microprocessor controlled softstart sequencer which, to minimise mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the p7 to be remotely switched in and out of standby via a 12-volt trigger input.The microprocessor continuously monitors the condition of each channel, including temperature, output current and dc offset, to ensure correct operation or instant shut-down under fault conditions. It also controls a variable-speed cooling fan, for those rare occasions when convection cooling is not enough. The p7 features a beautifully contoured front panel and integral air intake slot, with 7 multicoloured LEDs to show the operating status of each channel. The whole case is made of heavy gauge aluminium, which helps the overall sound quality due to its excellent thermal and non-magnetic properties. Because it weighs over 30 kg, even the p7s feet are made from machined aluminium, complete with easy slide plastic inserts to help with installation.This is very heavy and post is expensive so pick up only or i will deliver in greater manchester for £20.If you are further away please contact me for negotiated delivery price before auction ends, but i am not delivering if to far away.DELIVERY PAID UPFRONT BEFORE DELIVERY VIA PAYPAL. THE REST CASH ON DELIVERY. CASH ON COLLECTION IS OKTHX certified Multi-Channel power amplifierDelivers a massive 150W per channel into 8 Ohms 230W per channel into 4 ohmsNear perfect channel isolation prevents signal distortionCan be daisy chained for Bi or even Tri-ampingMulti-coloured LED display12V trigger for remote activationWith high grade power cord

ARCAM FMJ P7 7 CHANNEL POWER AMPLIFIER WORKING GOOD CONDITION 150 WPC ON ALL 7CH

Ende: 29.05. 2023 18:00:01 am Montag
  • Zustand: Gebraucht
  • Preis: 807.46 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 325664736251
  • Anzahl Gebote: 0
  • Verkäufer: darrenain1 (1447|100.0%)
  • Verkäufertyp: Privat
  • Ort: manchester Großbritannien
  • Versand nach: None
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    ARCAM FMJ P7 MULTI 7 CHANNEL POWER AMPThe ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener.Construction/Design is Class AB amplifier with first 50W in class AA completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 micrfarads of storage capacitance, fed from a total of 14 individual windings on the p7s two massive 1500va toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its full rated continuous output power of 150 Watts into 8 ohms or 230 Watts into 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the p7 is a further development of that used in Arcams award-winning a85 and a32 amplifiers and has ultra low distortion together with exceptional dynamic range and transient response.The p7 is a thx specified, 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It is the perfect partner to the av8 processor, but will also complement the performance of any other high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the p7 to ensure it will look stunning in your home installation. The p7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers.As the p7 amplifier is capable of delivering over 1.6 kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminium heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the p7 is equipped with a heavy duty mains cable and socket, coupled to a microprocessor controlled softstart sequencer which, to minimise mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the p7 to be remotely switched in and out of standby via a 12-volt trigger input.The microprocessor continuously monitors the condition of each channel, including temperature, output current and dc offset, to ensure correct operation or instant shut-down under fault conditions. It also controls a variable-speed cooling fan, for those rare occasions when convection cooling is not enough. The p7 features a beautifully contoured front panel and integral air intake slot, with 7 multicoloured LEDs to show the operating status of each channel. The whole case is made of heavy gauge aluminium, which helps the overall sound quality due to its excellent thermal and non-magnetic properties. Because it weighs over 30 kg, even the p7s feet are made from machined aluminium, complete with easy slide plastic inserts to help with installation.This is very heavy and post is expensive so pick up only or i will deliver in greater manchester for £20.If you are further away please contact me for negotiated delivery price before auction ends, but i am not delivering if to far away.DELIVERY PAID UPFRONT BEFORE DELIVERY VIA PAYPAL. THE REST CASH ON DELIVERY. CASH ON COLLECTION IS OKTHX certified Multi-Channel power amplifierDelivers a massive 150W per channel into 8 Ohms 230W per channel into 4 ohmsNear perfect channel isolation prevents signal distortionCan be daisy chained for Bi or even Tri-ampingMulti-coloured LED display12V trigger for remote activationWith high grade power cord

ARCAM FMJ P7 7 CHANNEL POWER AMPLIFIER WORKING GOOD CONDITION 150 WPC ON ALL 7CH

Ende: 14.05. 2023 19:02:24 am Sonntag
  • Zustand: Gebraucht
  • Preis: 807.11 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 325655485449
  • Anzahl Gebote: 0
  • Verkäufer: darrenain1 (1445|100.0%)
  • Verkäufertyp: Privat
  • Ort: manchester Großbritannien
  • Versand nach: GB
  • Versandkosten: 110,36 EUR
  • bei ebay
  • Beschreibung

    ARCAM FMJ P7 MULTI CHANNEL POWER AMPThe ARCAM P7 Multichannel Power Amplifier will deliver equally breathtaking results from both music and home cinema sources. It will enthrall even the most experienced and discerning listener.Construction/Design is Class AB amplifier with first 50W in class AA completely modular design, with 7 identical and fully isolated power amplifiers, these may be daisy chained for bi-amping or tri-amping suitable loudspeakers. Each amplifier module has its own bridge rectifiers and 20,000 micrfarads of storage capacitance, fed from a total of 14 individual windings on the p7s two massive 1500va toroidal power transformers. This arrangement ensures near perfect isolation between the channels for the avoidance of hum loops. It also means that each channel can always deliver its full rated continuous output power of 150 Watts into 8 ohms or 230 Watts into 4 ohms, irrespective of what the other channels are doing. The advanced current feedback circuit topology used in the p7 is a further development of that used in Arcams award-winning a85 and a32 amplifiers and has ultra low distortion together with exceptional dynamic range and transient response.The p7 is a thx specified, 7 channel power amplifier which has been designed to deliver reference standard amplification in high performance audio-video installations. It is the perfect partner to the av8 processor, but will also complement the performance of any other high-quality preamp processor. As well as being technically superb, great attention has been paid to the aesthetic design of the p7 to ensure it will look stunning in your home installation. The p7 represents a tour-de-force in amplifier design. Certain to enrich your listening experience, its abundant power and finesse firmly positions Arcam in a small, select group of world-class producers.As the p7 amplifier is capable of delivering over 1.6 kilowatts of continuous undistorted audio power, there were a number of engineering challenges that have had to be overcome to ensure both short and long-term reliable operation. Each channel uses four Sanken heavy duty bipolar output transistors firmly bolted to a large custom designed aluminium heatsink. These heatsinks are thermally very efficient so that, under normal conditions, the amplifier needs only convection cooling and is thus silent in use. With so much power on tap the p7 is equipped with a heavy duty mains cable and socket, coupled to a microprocessor controlled softstart sequencer which, to minimise mains inrush currents, turns on the channels one by one. This system is powered from its own small toroidal power transformer, permitting the p7 to be remotely switched in and out of standby via a 12-volt trigger input.The microprocessor continuously monitors the condition of each channel, including temperature, output current and dc offset, to ensure correct operation or instant shut-down under fault conditions. It also controls a variable-speed cooling fan, for those rare occasions when convection cooling is not enough. The p7 features a beautifully contoured front panel and integral air intake slot, with 7 multicoloured LEDs to show the operating status of each channel. The whole case is made of heavy gauge aluminium, which helps the overall sound quality due to its excellent thermal and non-magnetic properties. Because it weighs over 30 kg, even the p7s feet are made from machined aluminium, complete with easy slide plastic inserts to help with installation.THX certified Multi-Channel power amplifierDelivers a massive 150W per channel into 8 Ohms 230W per channel into 4 ohmsNear perfect channel isolation prevents signal distortionCan be daisy chained for Bi or even Tri-ampingMulti-coloured LED display12V trigger for remote activationWith high grade power cord

Arcam FMJ P7 Multi-channel Power Amplifier

Ende: 21.09. 2021 16:38:06 am Dienstag
  • Zustand: Gebraucht
  • Preis: 750.54 EUR Auktion
  • Status: verkauft
  • Artikelnummer: 203605068547
  • Besucherzähler: 745
  • Anzahl Gebote: 23
  • Verkäufer: manekd (632|100.0%)
  • Verkäufertyp: Privat
  • Ort: Lewes Großbritannien
  • Versand nach: GB
  • Versandkosten: 50,0 EUR
  • bei ebay

Arcam FMJ Setup - P7 - AV9 - DV29 - MS250

Ende: 06.09. 2021 03:30:51 am Montag
  • Zustand: Gebraucht
  • Preis: 2908.56 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 274780335929
  • Besucherzähler: 990
  • Verkäufer: retro-hi-fi (139|100.0%)
  • Verkäufertyp: Gewerblich
  • Ort: CORNWALL Großbritannien
  • Versand nach: GB
  • Versandkosten: 125,0 EUR
  • bei ebay

ARCAM FMJ P7 7-Channel AV Power Amplifier in Silver

Ende: 20.07. 2021 15:36:35 am Dienstag
  • Zustand: Gebraucht
  • Preis: 585.54 EUR Auktion
  • Status: verkauft
  • Artikelnummer: 184940132766
  • Besucherzähler: 593
  • Anzahl Gebote: 23
  • Verkäufer: handjay (441|96.2%)
  • Verkäufertyp: Gewerblich
  • Ort: Gerrards Cross Großbritannien
  • Versand nach: GB
  • Versandkosten: 65,0 EUR
  • bei ebay

Arcam FMJ-P7 7-Channel Power Amplifier

Ende: 14.06. 2021 12:13:50 am Montag
  • Zustand: Gebraucht
  • Preis: 1686.48 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 353516263524
  • Besucherzähler: 257
  • Verkäufer: f89f19 (165|99.3%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: East Rockaway, New York USA
  • Versand nach: US
  • Versandkosten: 85,82 EUR
  • bei ebay

Arcam FMJ P7 Power Amplifier

Ende: 17.04. 2021 13:21:15 am Samstag
  • Zustand: Vom Verkäufer generell überholt
  • Preis: 2300.3 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 274729607140
  • Besucherzähler: 406
  • Verkäufer: retro-hi-fi (134|100.0%)
  • Verkäufertyp: Gewerblich
  • Ort: CORNWALL Großbritannien
  • Versand nach: GB
  • Versandkosten: 45,0 EUR
  • bei ebay