Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

Zum Verkauf steht ein funktionsfhiges, gebrauchtes Technics RS-AZ7 Tonbandgert. Optischer Zustand auf den Fotos. Privatverkauf, daher keine Garantie, Gewhrleistung oder Rcknahme.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Technics RS-AZ7 Stereo Cassette Deck (Made in Japan)This deck in great condition and full working orderIt comes with power plug only, nothing else includedThere are all heads in top cleaned conditionProducing fantastic playback & recordingsIt has very low milage with little usagePlease see an actual pictures belowPosted via Recorded DeliveryThanks for watching!

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Technics RS-AZ7 Cassette Tape Deck Seperate Amorphous 3-Head Stereo - AA Class. In full working order. The case has a lot of cosmetic marks to the top as shown in the photos but the fascia is in great condition. Please view all the photos for contents and condition. Collection welcome. 99p start auction without reserve price. No buy it now.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

*Product Description Please see the pictures of the products for more details about the condition of the products.Technics RS-AZ7 3 Head Cassette Deck High-end “Read & Watch YouTube Video Link :https://youtu.be/1EMtlHvcI3cPlease see the YouTube video, it does play good, the pinch roller need to be changed because it’s damaged but it playing even with that. The recording is not good i think it’s because of the pinch roller, but not sure 100% if that the problem. Please don’t buy until you see the video because i don’t accept returns. Buy as is, thank you for your understanding.If you have any question or concern,please do not hesitate to contact me.*Payment I only accept paypal payment.The payments should be paid within 2 business days of auction closing.*Shipping The item usually will be shipped within 2-3 days after your full payment has been received.And i will send you the tracking number.The items are shipped from morocco .Standard shipping: about 10-25 working days. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer?s responsibility. I will try my best to reduce the risk of the custom duties.Please check with your countrys customs office to determine what these additional costs will be prior to buying.*Feedback Your satisfaction is my first priority.If you are satisfied with the purchase, please take a minute to leave me a positive feedback. I appreciate your kindness.If you have any any kind of problem with your order,please contact me and i will do my best to make you satisfied.*Contact me Please click Ask a question to send Message through eBay.I always respond within 24 hours.Any problem Any Question,Welcome to contact me.Thank you.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

*Product Description Please see the pictures of the products for more details about the condition of the products.Technics RS-AZ7 3 Head Cassette Deck High-end “Read & Watch YouTube Video Link :https://youtu.be/1EMtlHvcI3cPlease see the YouTube video, it does play good, the pinch roller need to be changed because it’s damaged but it playing even with that. The recording is not good i think it’s because of the pinch roller, but not sure 100% if that the problem. Please don’t buy until you see the video because i don’t accept returns. Buy as is, thank you for your understanding.If you have any question or concern,please do not hesitate to contact me.*Payment I only accept paypal payment.The payments should be paid within 2 business days of auction closing.*Shipping The item usually will be shipped within 2-3 days after your full payment has been received.And i will send you the tracking number.The items are shipped from morocco .Standard shipping: about 10-25 working days. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer?s responsibility. I will try my best to reduce the risk of the custom duties.Please check with your countrys customs office to determine what these additional costs will be prior to buying.*Feedback Your satisfaction is my first priority.If you are satisfied with the purchase, please take a minute to leave me a positive feedback. I appreciate your kindness.If you have any any kind of problem with your order,please contact me and i will do my best to make you satisfied.*Contact me Please click Ask a question to send Message through eBay.I always respond within 24 hours.Any problem Any Question,Welcome to contact me.Thank you.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

For sale is this great Technics RS-AZ7 High End Stereo Cassette Deck.I would class this deck as being in a good, used condition with a few marks, scuffs and scratches from wear and use. There is also, what looks like glue on the power button and a little to the right of the display. This could possibly be removed, but I havent attempted this. Please check out all the pictures (I have included loads from all angles with flash on and off) as these make up a large part of the description and show the condition well.Legendary deck from Technics, which sounds great and is in full working order. Only thing to note is that I believe there should be a green light inside the cassette compartment but if there should be, this isnt working, but guess would just need a new bulb. As with all vintage cassette decks, it would probably benefit from a good service (clean and potential belts) before regular use, so please bear this in mind but as stated, is fully working. Please have a Google for full details and spec.Please note, although the deck is fully working, as this is a vintage unit, there are no returns on this listing. It comes as pictured with power cable and original user manual (not pictured). Nothing else is included. They will be expertly packaged for delivery and will be sent fully insured too. Happy to ship abroad, this will be done via the Global Shipping Programme and they supply the cost of this.Payment via Ebay or cash on collection from Norwich (I am in Lingwood) or with prior arrangement I can possibly deliver in and around Norwich/Yarmouth!Any questions just ask. Thanks

Technics Stereo Cassette Deck RS-AZ7 - 3 Head-Tapedeck schwarz Es handelt sich um Originalfotos. Kein Ausweis der Umsatzsteuer da Differenzbesteuerung gemäß § 25a UstG.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle