Wir verkaufen einen Beogram 5005 Plattenspieler von der Marke Bang & Olufsen. Er ist voll funktionstüchtig. Die abgebildete MMC4 Nadel wird NICHT verkauft. Man kann sie gern zum testen nutzen, aber diese Nadel ist NICHT beim Verkauf dabei. Selbstverständlich kann der Plattenspieler bei der Abholung getestet werden. Wir verschicken den Plattenspieler nicht, da wir keine Reklamationen haben möchten, wenn was beim Versand passiert. Nichtraucher und tierfreier Haushalt. Es handelt sich um einen Privatverkauf, keine Garantie und keine Rücknahme.

Angebot: BANG & OLUFSEN Plattenspieler BEOGRAM 5005 mit gewartetem (siehe Rechnung) MMC 1 - Abnehmer. Das Gerät funktioniert einwandfrei, wurde jedoch sehr selten benutzt. Auf dem Deckel stand das Master-Control Panel, es sind daher leichte Gebrauchsspuren entstanden. Privatverkauf, Versand erfolgt aus Österreich

Angebot: BANG & OLUFSEN Plattenspieler BEOGRAM 5005 mit gewartetem (siehe Rechnung) MMC 1 - Abnehmer. Das Gerät funktioniert einwandfrei, wurde jedoch sehr selten benutzt. Auf dem Deckel stand das Master-Control Panel, es sind daher leichte Gebrauchsspuren entstanden. Privatverkauf, Versand erfolgt aus Österreich

Angebot: BANG & OLUFSEN Plattenspieler BEOGRAM 5005 mit gewartetem (siehe Rechnung) MMC 1 - Abnehmer. Das Gerät funktioniert einwandfrei, wurde jedoch sehr selten benutzt. Auf dem Deckel stand das Master-Control Panel, es sind daher leichte Gebrauchsspuren entstanden. Privatverkauf, Versand erfolgt aus Österreich

This is a Bang Olufsen B&O Beogram 5005 Turntable/Record Player. It includes the original MMC 3 Cartridge which seems to still be in good condition. I put the unit through its paces and could not find any issues or problems with it except that I did notice a little warble in the audio and I am not sure if that is from the record I have or if the platter itself is not spinning evenly. It has been sitting for many years so it could be the belt just needs to be replaced. The unit does have some cosmetic issues so please be sure to take a good look at the pictures and please ask any questions if you have any. Sold as-is/As Pictured.

Optimum Pivot Point patented suspension secures against vibrations giving dance-proof playbackAluminium anti-static platter and brushed aluminium surround styling provide a more refined, greater quality look Shelf-mountable (Genuine B&O plate steel floating turntable shelf available form me - please message through the contact details) Slim square profile gives a really stylish look that matches the entire Beosystem - see photo for engineering reasoning Tangential tracking keeps the stylus at the optimum angle for unrivalled contact and signal reproduction. Playing the recording at exactly the same angle as it was cut. Youll hear all the nuances of the recording, often sounding like a different (better) trackRepeat function lets you hear the same tune again and again (up to 7 times)Stylus sold separately - some brilliant new old stock available in my other listingsMatch withMMC5 Cartridge Stylus as a great introduction to their superior outputBeomaster 5000 Receiver amp for matching aesthetic and to start the intended Beosystem 5000 - this is the upgrade tangential deck for the 5000 system as it was originally sold with the 5000 radial deck Beolink Remote Terminal, add convenience and functionality to the receiver to swap sources, change the volume and start recordings Beocord 5000 cassette recorder in matching aesthetics and also flush-mountableBeogram CD 5500 Upgrade with:MMC4 or MMC3 cartridge stylus Most of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that serviceTESTIMONIALS I dont like to disguise the postage and packaging costs in the item price. This shipping price includes, packing materials, insurance and first class tracking that is an unfortunate necessity due to buyer fraud. It is not even the full cost, only the Royal Mail charge. Thank you for your understanding.

Angebot: BANG & OLUFSEN Plattenspieler BEOGRAM 5005 mit gewartetem (siehe Rechnung) MMC 1 - Abnehmer. Das Gerät funktioniert einwandfrei, wurde jedoch sehr selten benutzt. Auf dem Deckel stand das Master-Control Panel, es sind daher leichte Gebrauchsspuren entstanden. Privatverkauf, Versand erfolgt aus Österreich

Bang & Olufsen BEOGRAM 5005 Turntable is fully working, checked tested with MMC5 cartridge and compatible bang&olufsen amplifier however cartridge is not included i sell only turntable. Top aluminum surface has lot of scratches and need polishing, also plastic cover probably need some good polishing. Nothing is broken or damaged as far as i know. It is hard to show scratches on plastic&aluminum on pictures but there is lot of them. Do not worry about shipping, it arrive in one piece - there are some lock screws under turntable so the whole mechanism will be locked under transport. Shipping Inside EU+UK 40Eur Prioritywait for new invoice if you are EU citizen.

In vendita un giradischi tangenziale Beogram 5005 type 5921 Bang & Olufsen. Sia le superfici di alluminio che il coperchio sono in condizioni molto buone. Basta mettere il disco e premere play ed i giradischi sceglie la velocità ed il primo solco. Fornito con connettore Din 5 poli. Se necessario, puo essere fornito di adattatore per RCA per 10 euro. E comunque necessario un amplificatore con ingresso phono. NOTA BENE acquisto con clausola VISTO e PIACIUTO. Vendita tra privati, nessuna garanzia o restituzione.

This Bang & Olufsen Beogram 5005 turntable is a premium piece of audio equipment for any vinyl enthusiast. It boasts a tangential arm for optimal sound quality, as well as a belt drive system and 45RPM/33.3RPM speed settings. The model is part of the B&O Beosystem 5000 collection and features a DIN audio output. This turntable is a must-have for any serious audiophile and a perfect addition to any home audio setup. Good MMC4 Cartridge Included With Turntable

Angebot: BANG & OLUFSEN Plattenspieler BEOGRAM 5005 mit gewartetem (siehe Rechnung) MMC 1 - Abnehmer. Das Gerät funktioniert einwandfrei, wurde jedoch sehr selten benutzt. Auf dem Deckel stand das Master-Control Panel, es sind daher leichte Gebrauchsspuren entstanden. Privatverkauf, Versand erfolgt aus Österreich

B&O Bang Olufsen Beogram 5005 Turntable with MMC2 Cartridge Condition is used Shipped with FedEx and packed carefully Overall, in good condition cosmetically tested and working unit has been serviced, cleaned, lubricated, ready to use! Please see pictures for better description If you have any questions, please let me know If anything wrong with the item, please don’t open a return request. Message me first. Support my small business by following my store on instagram in the link below: instagram.com/joshuasvintagehifi/ Thanks for looking.

For sale is a BeoGram 7000 lid in excellent condition with very little wear. Some light scratching please view photos. Very rare to find one of these in good condition.

Optimum Pivot Point patented suspension secures against vibrations giving dance-proof playbackAluminium anti-static platter and brushed aluminium surround styling provide a more refined, greater quality look Shelf-mountable (Genuine B&O plate steel floating turntable shelf available form me - please message through the contact details) Slim square profile gives a really stylish look that matches the entire Beosystem - see photo for engineering reasoning Tangential tracking keeps the stylus at the optimum angle for unrivalled contact and signal reproduction. Playing the recording at exactly the same angle as it was cut. Youll hear all the nuances of the recording, often sounding like a different (better) trackRepeat function lets you hear the same tune again and again (up to 7 times)Stylus sold separately - some brilliant new old stock available in my other listingsMatch withMMC5 Cartridge Stylus as a great introduction to their superior outputBeomaster 5000 Receiver amp for matching aesthetic and to start the intended Beosystem 5000 - this is the upgrade tangential deck for the 5000 system as it was originally sold with the 5000 radial deck Beolink Remote Terminal, add convenience and functionality to the receiver to swap sources, change the volume and start recordings Beocord 5000 cassette recorder in matching aesthetics and also flush-mountableBeogram CD 5500 Upgrade with:MMC4 or MMC3 cartridge stylus Most of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that serviceTESTIMONIALS I dont like to disguise the postage and packaging costs in the item price. This shipping price includes, packing materials, insurance and first class tracking that is an unfortunate necessity due to buyer fraud. It is not even the full cost, only the Royal Mail charge. Thank you for your understanding.

Bang & Olufsen B & O Beogram 5005 Record Deck Turntable VGC GWO New Belt Fitted ~ No stylus Included A beautiful example.... please note there is no Cartridge/Stylus included so you will need your own (MMC5 / MMC4 / MMC3) In lovely condition, a new belt has just been fitted (old ones stretch and so affect the pitch of the music).I tested with my own cartridge and it picks up and puts down in the right place and plays music as should (you need to plug into separate amp and speakers).As well as working great it looks Fab as you can see. Often the perspex and metal trim are covered in scratches but this one is very nice just light dusting marks and very light scratches on metal trim .... took close up of worst last pic. Any question very happy to answerShipping is to mainland UK ONLY and i will vewry carefully pack deploying transit screws and lots of packing in strong box. If you want to collect i can rig it up and show you it working From a smoke free home

For Sale ,a Bang & Olufsen Beogram 5005 record deck for Spares Or Repair.The deck is in good cosmetic condition for age, sold as-seen , no box or instructions.The deck has NO cartridge ,the platter motor is a bit noisey ,and the fine arm position adjustment is not working.The platter will be removed and packed separately for shipping, and the arm will have packing around it to prevent movement.The deck does run .It will be securely packed on despatch.Auction Only , No Buy It Know..

Original Bang & Olufsen MMC4 Cartridge/Stylus Uk stock ready for dispatch NOW Sounds great Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specification Tracking perfectly with 1.2gram vertical tracking force MMC4 Specifications Description Titanium-bonded elliptical diamond, mounted on a tapered aluminium cantileverTracking force - grams 1.2Diamond Stylus EllipticalCantilever tube. Tap. alum. .Effective tip mass mg 0,4Compliance mg/mN 25Frequency 20-20000 Hz=/-dB 2,5Channel separation 1000>dB 22Output mV/cm/s RMS 0,6Cartridge weight gram 1,6 Courtesy of Beoworld.org MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources. No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.

Original Bang & Olufsen MMC5 Cartridge/StylusUk stock ready for dispatch NOW Sounds greatChecked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking force Courtesy of Beoworld.org MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridge If you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.

Original Bang & Olufsen MMC4 Cartridge/StylusUk StockSounds greatChecked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.2gram vertical tracking force MMC4 Specifications Description Titanium-bonded elliptical diamond, mounted on a tapered aluminium cantilever Tracking force - grams 1.2 Diamond Stylus Elliptical Cantilever tube. Tap. alum. . Effective tip mass mg 0,4 Compliance mg/mN 25 Frequency 20-20000 Hz=/-dB 2,5 Channel separation 1000>dB 22 Output mV/cm/s RMS 0,6 Cartridge weight gram 1,6 Courtesy of Beoworld.org MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridge If you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.

Original Bang & Olufsen MMC4 Cartridge/Stylus Uk stock ready for dispatch NOW Sounds great Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specification Tracking perfectly with 1.2gram vertical tracking force MMC4 Specifications Description Titanium-bonded elliptical diamond, mounted on a tapered aluminium cantileverTracking force - grams 1.2Diamond Stylus EllipticalCantilever tube. Tap. alum. .Effective tip mass mg 0,4Compliance mg/mN 25Frequency 20-20000 Hz=/-dB 2,5Channel separation 1000>dB 22Output mV/cm/s RMS 0,6Cartridge weight gram 1,6 Courtesy of Beoworld.org MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources. No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.

Original Bang & Olufsen MMC5 Cartridge/StylusUk stock ready for dispatch NOW Sounds greatChecked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking force Courtesy of Beoworld.org MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridge If you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.

Angebot: BANG & OLUFSEN Plattenspieler BEOGRAM 5005 mit gewartetem (siehe Rechnung) MMC 1 - Abnehmer. Das Gerät funktioniert einwandfrei, wurde jedoch sehr selten benutzt. Auf dem Deckel stand das Master-Control Panel, es sind daher leichte Gebrauchsspuren entstanden. Privatverkauf, Versand erfolgt aus Österreich

For sale is a BeoGram 7000 lid in excellent condition with very little wear. Some light scratching to the perspex plastic on the front which will be able to polish out. Very rare to find one of these in good condition.