Bang & Olufsen Beocenter 9000/9500/9300 Right panel with 7-segment display 45/46 Module 8002740/8002736 Upper right display panel for Beocenter 9000, 9500, 8000, 8500, and 9300 models. This part is the an A revision part number, but is interchangeable with all versions across all models above. Postage The part will be carefully packed, boxed, and sent promptly by recorded post. Returns and worldwide postage are available.

Bang & Olufsen Beocenter 9300 Amplifier module Board number: 6142447C Part number: 8001903 Should also replace 8001640 Complete amplifier module and heat sink for Beocenter 9300 models only . Original, working condition. Postage The part will be securely packed, boxed, and sent by 2nd class recorded post. Despatch is usually prompt, but please contact me if you need faster or guaranteed delivery. Worldwide postage is also available.

Obseclec.com • 07753 241443 • Obscure Eclectics Parts UK delivery and 30-day returns included • worldwide delivery available • before and after sales enquiries: 07753 241443 Beocenter 9500 & 8500 Input, Power Link, & tone module Part numbers Modules: 53, 54, 68 input select: 8001252 Volume and output amplifier: 8001253 Line in/out: 8001263 Bracket: 2542742 Holder: 3152511 Supply--> Compatibility Beocenter 9500 Beocenter 8500 Condition In tested, fully functioning condition; with new, high-quality electrolytic capacitors in the last 18 months. Postage The part will be carefully packed in an ESD-safe bag, boxed, and sent by recorded post. Postage discounts are available wherever possible if purchasing multiple items. Worldwide courier delivery is available: the price shown applies to Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details. All items are promptly despatched, and carefully packed using a minimum of plastic packaging. See how we package parts-->

Beosound Ouverture microcontroller UK delivery included • worldwide delivery available • 30-day returns • before and after sales enquiries: 07753 241443 Beocenter 2300/2500 transformer, power supply, and pre-amp module Description PCB with multivoltage mains transformer, power supply, pre-amp, Power Link, and input Part numbers 8001289 Board number: 6142035L Supply--> Compatibility Beosystem 2500, types 2701-2710 Beocenter 2500, types 2601-2610 Beocenter 2300, types 2611-2620 Voltage can be set by moving a zero Ohm link Condition In tested, working condition The mains socket pins are loose and may need adjusting or replacing. Postage The part will be carefully packed, boxed, and sent by recorded post. Postage discounts are available wherever possible if purchasing multiple items. Worldwide courier delivery is available: the price shown applies to Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details. All items are promptly despatched, and carefully packed using a minimum of plastic packaging. See how we package parts-->

Bang & Olufsen Beocenter 2800 Record Player Radio Untested. This music centre is untested and comes without speakers. Here is what I know. 1.The turntable spins and changes speed and I am told it works and i dont see why it wouldnt but would need a stylus to test. 2.I have plugged in but no lights come up on the radio functions so Im not sure if it works. 3.The front buttons are quite sticky and dont pop straight out. 4.Lid is good - no cracks 5.It comes with original polystyrene padding for turntable and tone arm plus original manual. 6.Will be securely packaged and insured for delivery. Hopefully it works or is an easy fix ,otherwise lots of good spares.

BANG & OLUFSEN MMC20E CARTRIDGE STYLUS B&O for BEOGRAM 4002 6000 4004 8000 BEOCENTER 7000 7002 THE BEST BUDGET MMC20 REPLACEMENT Inspected, tested and confirmed as new condition - see images, not the best, sorry MMC means Moving Micro-Cross, a principle designed for quadraphonic recordings - see below Titanium-bonded elliptical diamond, mounted on a tapered cantilever to reduce record wear and maintain optimum surface contact Effective Tip Mass of mg 0,4 this is what preserves your vinyl! Buy with confidence, over 80 new/new other condition MMC cartridge/styli sold in the last few years with 100% feedback. The QUALITRONICS DIFFERENCE Match with: Beogram 2400 2200 2402 6000 (Radial) Beocenter 5000 4600 7000 7002 2800 Tangential Beogram 4000 4002 4004 6000 Upgrade with: MMC20CL for sapphire tube cantilever and contct line cut diamond tip MMC6000 for true CD4 quadraphonic capabilities Most of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that service TESTIMONIALS

NEW BOXED BANG & OLUFSEN MMC2 Stylus Cartridge for B&O Beogram 6500 8002 Beocenter 2200 7007 plus these below Inspected, tested and confirmed as new condition - see imagesInterchnagable with any deck that has used an MMC 1 - 5 cartridge. Eg. Beogram RX RX2 TX TX2 1800 2000 3000 3300 3500 4500 5000 5500 5005 6500 7000 8002 9000 9500 and Beocenter 2200 7007 7700MMC means Moving Micro-Cross a superior pick up technology - see belowMMC2 is the SAME spec as MMC1 with the absolute best profile (with the lowest ETM) being labelled as 1s. Get the same spec for hundreds less!ONLY 0.3 milligrammes tracking force that really protects your precious vinylSapphire tubular cantilever and line contact diamond to reduce record wear and maintain optimum surface contact providing extended and more accurate sound reproductionEffective Tip Mass of mg 0,3 B&Os best ever was just 0,25 but if you can find an MMC1 let me know too! - explanation belowBuy with confidence, over 75 new/new other condition MMC cartridge/styli sold in the last 3 years all with 100% feedbackWill fit BeoGram models: RX RX2 TX TX2 1800 2000 2404 3000 3300 3500 4500 5000 5005 5500 6002 6500 7000 8002 8500 9000 9500One MMC2 supplied Photo of all 5 MMC range is for illustration only The tubular construction offered less weight than a solid cantilever but with immense stiffness. The diamond profile was similar to that of the MMC20CL being line contact. The way to look at these cartridges was to imagine an elliptical profile but with both the front and rear facets being scooped out. In this way the vertical contact surface was maximised and the horizontal element kept to a minimum.The MMC1 and MMC2 were essentially the same cartridge with the MMC1 using the best specified diamond tips. The MMC system was carried over from the SP series but taken to an even smaller level.MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal.Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.MMC2 SpecificationsNude multi-radial Contact Line diamond, mounted on a sapphire cantilever Tracking force - grams 1 Diamond Stylus Cont. line nude Cantilever tube Sapphire Effective tip mass mg 0,3 Compliance mg/mN 30 Frequency 20-20000 Hz=/-dB 1,5 Channel separation 1000>dB 25 Output mV/cm/s RMS 0,6 Cartridge weight gram 1,6 I dont like to disguise the postage and packaging costs in the item price. This shipping price includes, packing materials, insurance and first class tracking that is an unfortunate necessity due to buyer fraud. It is not even the full cost, only the Royal Mail charge. Thank you for your understanding.

BANG & OLUFSEN MMC20EN CARTRIDGE STYLUS B&O for BEOGRAM 4002 6000 4004 8000 BEOCENTER BEST MMC20CL REPLACEMENT Inspected, tested and confirmed as new condition - see images MMC means Moving Micro-Cross, a principle designed for quadraphonic recordings - see below Titanium-bonded naked elliptical diamond, mounted on a tapered cantilever to reduce record wear and maintain optimum surface contact Effective Tip Mass of mg 0,4 this is what preserves your vinyl!Buy with confidence, over 40 new/new other condition MMC cartridge/styli sold in the last year with 100% feedbackThe QUALITRONICS DIFFERENCEMatch with:Beogram 2400 2200 2402 6000 (Radial) Beocenter 5000 4600 7000 7002 2800 Tangential Beogram 4000 4002 4004 6000 Upgrade with:MMC20CL for sapphire tube cantilever and contct line cut diamond tip MMC6000 for true CD4 quadraphonic capabilities Most of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that serviceTESTIMONIALS The MMC 20EN combined cartridge/stylus from Bang & Olufsen was fitted with a naked elliptical diamond, mounted on a tiny tapered cantilever. It had been designed for top of the range record decks such as the Beogram 4002 and 4004. It followed the MMC 4000 cartridge and kept the naked elliptical diamond stylus which had been fitted to its predecessor. Performance for the MMC 20EN was excellent. It was highly regarded by Bang & Olufsen enthusiasts and black vinyl aficionados alike and had been designed especially for record decks which used tangential arms such as the Beogram 4002 when it could read SQ 4-channel quadraphonic-encoded matrix records. It could of course read both monophonic and stereophonic records as well.The MMC 20E is supplied with an elliptical naked diamond stylus with a recommended tracking force of 1g. As with all the MMC range each cartridge was an integrated unit especially to permit the best possible performance. It gave an excellent frequency rate with high channel separationAny of the MMC range of cartridges can be substituted for another model in the range. The cartridge was superceded by the MMC3 but these were for newer phomographs and used a different connector. Radius of curvature: 5 x 1,7 mmFrequency range: 20 - 25000 Hz+/- 1,5dBChannel separation: 1000Hz > 20dB, 40 - 10000Hz > 20dBChannel difference: <1,5dBIntermodulation: <1%Recommended stylus pressure: 1gCompliance: 30 x 10(-6)cm/dyneEffective tip mass: 0,4mgOutput: mV/cm/sec. 0,6mV/47kOhms MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.WORLDWIDE carriage may cost more OR LESS!! than the listing states (I have to enter an estimated figure) and will be charged in full as per the service chosen and destination country. Eg, air, surface, express, economy. I ALWAYS SEND WITH QUALITY PACKAGING, TRACKING AND INSURANCE. IF IN ANY DOUBT PLEASE ASK FOR A QUOTE. I NEED YOUR FULL ADDRESS FOR THISPostage/Carriage charges:You may have noticed that these has risen lately. Insurance has almost doubled and many carriers will not accept turntables, speakers or amplifiers, meaning I have to find a specialist. Im sorry that these have to be passed onto you. Qualitronics aims to recycle packaging as much as possible but it will always be top quality and usually its double-box where appropriate too.DELIVERY TO CHINA, ISRAEL, AUSTRALASIA, INDIA, RUSSIAN FEDERATION AND SOUTH AMERICA WILL BE ROUGHLY DOUBLE THE QUOTED INTERNATIONAL PRICE. TO BID IS TO ACCEPT THIS EXTRA PAYMENT. THANKS!About Qualitronics!Im running this business part-time whilst I raise my children. My daughter Issy is 6 years old, the apple of my eye, my teacher and the beneficiary of your purchases. (She says THANK YOU VERY MUCH!) Tommy is a terror-bag Toddler, 2 years old and his dimples charm the world. I endeavour to source the HIGHEST quality electronics, mostly B&O HiFi and will have owned most of the models in question at some time in my life. This gives me a real experience of the merits to share with you. Im a time-served Sound Engineer and use my trained ear to check each audio item. Its not just sonics though, look out for the weird and wonderful... as long as its well madePRE-SALE ENQUIRIES:Im more than happy to answer any questions, offer advice and make suggestions over the phone and many customers have already found this useful.Please call the customer service line accessed by clicking the ask a question feature or opening the full information link in the business information section below. The full number is not always displayed. Often the first zero is missing. This is ebays procedure and not mine. PRODUCTION DESIGNERS AND PROPERTIES BUYERS A number of my items have now featured in TV ads, theatre and film productions and professional photography having been bought by production designers, location agents and properties buyers. These include a Beocenter 2200, Beocenter 7007, Beovox S45 speakers. I recognise the tight deadlines that you have to work to and the immediacy you often have to work under. For the speediest solution I can offer, including same or next day delivery, suitability of product or advice on matching items to an era (or decade), please use the customer service line accessed by clicking the ask a question feature or opening the full information link in the business information section below. COLLECT IN PERSON:This is actively encouraged! This way, no clumsy or disgruntled delivery person can break it! Do check in advance the location of the item youre interested in. A quick call will be all thats needed to confirm the whereabouts. Whilst the business is registered in London, I also have stock stored near Maidstone, Manchester and the Midlands. I can only accept cash on collection as the payment method if visiting the premises due to the PayPal charge back scam. INSTALLATION:I am increasingly being commissioned to complete installations of the products that I sell. Depending upon your location and items purchased this can be achieved for little more than the usual shipping and insurance costs of the selected units. You receive the assurance of a properly connected system, including optimum placement design and the benefit of a full demonstration, highlighting the tips and techniques garnered from decades of experience and expertise. Recent installations have ranged from a single Beocenter being connected to the existing speakers and unit for an 89-years young-lady for a few hundred pounds to a multi-room, Beocenter, Beogram, Beovox and B&O dedicated cabinet and stands combination, with remote control, for a few thousand pounds.Please use the ask a question feature to access the pre-sales telephone number to discuss your requirements.SOURCING SERVICE:Cant find that B&O product that youve yearned for since you were a kid? Need a rare or discontinued part to repair your unit? If I dont have it in stock, then I can normally source one very quickly. I have a wide network of fellow enthusiasts, collectors, dealerships and retired B&O Engineers whom I can call upon to fulfill your needs.FEEDBACK:Your positive feedback is vital to all good sellers. It lets us know that you are happy, if not delirious, about your purchase. On very rare occasions, there may be an issue with your order, such as courier damage or simply leaving transit screws engaged. (Quite common). I can remedy any such issues to your complete satisfaction most quickly via the telephone or eBay message (without the need to open a case). Please use the contact number shown when you select the ask a question button. I realise that you are very, very busy, only one in three of my clients has found the time to leave feedback that also informs their peers of their positive experience. Indeed all of Qualitronics feedback is from buyers and not inflated by that of other sellers. Your contribution will be greatly appreciated. INTERNATIONAL PURCHASES:Please note that Qualitronics is not responsible for any additional import tariffs or customs charges levied at source or upon delivery. It is the buyers responsibility to check before purchasing for their own countrys charges. VOLTAGE:All electrical items are UK voltage (240v) and B&O UK type xxxx unless otherwise stated.

BANG OLUFSEN MMC3 Stylus Cartridge B&O Beocenter 2200, 7700, 7007, Beogram 1800.

Chaine Hifi Bang Olufsen Beocenter 1800 rviser. Tuner et voyants Ok Ampli : fonctionne parfaitement mais sur une seule voie!!! Platine disque sans cellule, courroie OK mais vrifier Quelques manques de placages

Bang & Olufsen Beocenter 2800 hi-fi system - with MMC 20 S stylus + 4 B&O speakers A true classic of a hi-fi system!! I bought this second hand 8 years ago and it had just had a new turntable belt - it has not seen a huge amount of use, perhaps an hour or two each month. I play old vinyl and newer heavy vinyl and both play ok but the right hand channel sometimes drops out - I’m not sure how much is down to the quality of some of my vinyl or down to the stylus. This does not happen when playing from my phone via the tape input so that tells me the amplifier is ok. 50 watt amplifier (2 x 25). Dual output so 4 speakers can be connected (4 x 12.5) and individually selected as each pair or both pairs. Volume, bass, treble, balance all working. The FM tuner works - the rear antenna socket is loose but still functional. Phone / MP3 music can be connected via the “tape” - I play from my iPhone and it works great, see pics. I will include the cable for this. 2 x S60 watt speakers - fully functional. 2 x S75 watt speakers - fully functional. Speakers 590mm (H) x 320mm (W) x 230mm (D) - either vertical or horizontal mount. Speaker S60 or S75 badge rotates to suit how speaker is orientated. All speaker cables included. Overall in good presentable condition. No signs of any damage. This is a 40-50 year old iconic hi-fi brand, I am only selling as we plan to move and I need a system with smaller speakers. Collection only due to weight. Located in Surrey 10 minutes from J7 or J8 of M25. PLEASE NOTE ….. PAYMENT ON COLLECTION, DO NOT MAKE PAYMENT PRIOR - I WANT YOU TO BE HAPPY WITH THE ITEM BEFORE YOU TAKE IT AWAY. CASH ON COLLECTION.

Original Bang & Olufsen MMC4 Cartridge/StylusUk stock ready for dispatch NOW Sounds greatChecked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.2gram vertical tracking force MMC4 Specifications Description Titanium-bonded elliptical diamond, mounted on a tapered aluminium cantilever Tracking force - grams 1.2 Diamond Stylus Elliptical Cantilever tube. Tap. alum. . Effective tip mass mg 0,4 Compliance mg/mN 25 Frequency 20-20000 Hz=/-dB 2,5 Channel separation 1000>dB 22 Output mV/cm/s RMS 0,6 Cartridge weight gram 1,6 Courtesy of Beoworld.org MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridge If you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.

Bang & Olufsen Beocenter 2800 hi-fi system - with MMC 20 S stylus + 4 B&O speakers A true classic of a hi-fi system!! I bought this second hand 8 years ago and it had just had a new turntable belt - it has not seen a huge amount of use, perhaps an hour or two each month. I play old vinyl and newer heavy vinyl and both play ok but the right hand channel sometimes drops out - I’m not sure how much is down to the quality of some of my vinyl or down to the stylus. This does not happen when playing from my phone via the tape input so that tells me the amplifier is ok. 50 watt amplifier (2 x 25). Dual output so 4 speakers can be connected (4 x 12.5) and individually selected as each pair or both pairs. Volume, bass, treble, balance all working. The FM tuner works - the rear antenna socket is loose but still functional. Phone / MP3 music can be connected via the “tape” - I play from my iPhone and it works great, see pics. I will include the cable for this. 2 x S60 watt speakers - fully functional. 2 x S75 watt speakers - fully functional. Speakers 590mm (H) x 320mm (W) x 230mm (D) - either vertical or horizontal mount. Speaker S60 or S75 badge rotates to suit how speaker is orientated. All speaker cables included. Overall in good presentable condition. No signs of any damage. This is a 40-50 year old iconic hi-fi brand, I am only selling as we plan to move and I need a system with smaller speakers. Collection only due to weight. Located in Surrey 10 minutes from J7 or J8 of M25. PLEASE NOTE ….. PAYMENT ON COLLECTION, DO NOT MAKE PAYMENT PRIOR - I WANT YOU TO BE HAPPY WITH THE ITEM BEFORE YOU TAKE IT AWAY. CASH ON COLLECTION.

Bang & Olufsen Beocenter 2800 Record Player Radio Untested. This music centre is untested and comes without speakers. Here is what I know. 1.The turntable spins and changes speed and I am told it works and i dont see why it wouldnt but would need a stylus to test. 2.I have plugged in but no lights come up on the radio functions so Im not sure if it works. 3.The front buttons are quite sticky and dont pop straight out. 4.Lid is good - no cracks 5.It comes with original polystyrene padding for turntable and tone arm plus original manual. 6.Will be securely packaged and insured for delivery. Hopefully it works or is an easy fix ,otherwise lots of good spares.

BANG OLUFSEN MMC20E STYLUS CARTRIDGE B&O Beocenter 4600, 4800, 7000, 7002, 5000. Fully tested and working Any questions please ask thanks

BANG OLUFSEN MMC3 Stylus Cartridge B&O Beocenter 2200, 7700, 7007, Beogram 1800.

Auto reverse - Non Bande Passante - 20-20000Hz Matière Extérieure - Aluminium et plastique Puissance Admissible - 2 x 30 Watts Stéréo / Mono - Stéréo Vitesses - 33t, 45t Nombre De Haut-Parleurs - 4 Power supply: 110 - 130 - 220 - 240 VPower consumption: 20 - 170 W 50 x 12 x 37 m13 kg .Tous les détails non mentionnes mais visibles sur les photos seront considérés comme décrits. .En état de fonctionnement

Bang & Olufsen Beocenter 2800 Record Player Radio Untested. This music centre is untested and comes without speakers. Here is what I know. 1.The turntable spins and changes speed and I am told it works and i dont see why it wouldnt but would need a stylus to test. 2.I have plugged in but no lights come up on the radio functions so Im not sure if it works. 3.The front buttons are quite sticky and dont pop straight out. 4.Lid is good - no cracks 5.It comes with original polystyrene padding for turntable and tone arm plus original manual. 6.Will be securely packaged and insured for delivery. Hopefully it works or is an easy fix ,otherwise lots of good spares.

Genuine vintage Bang & Olufsen Beocenter 8000 stereo radio cassette CD deck No power so nothing can be tested, unit clicks sometimes when you switch the plug on but doesnt light up or start. Broken corner of flap top left, broken lower glass control panel at bottom right. Ideal for the knowledgeable to restore or strip and sell the parts. Very heavy as is usual for B&O hence shipping cost. Feel free to collect from HorshamSelling as spares or repairs so no returns. See Beowold review below.Shipping or collection from Horsham, West SussexPlease see my other B&O listingsThanks for looking! PS Please dont send me your contact details as this is detected by ebay and may result in restrictions being imposed on either or both of us. Thanks for your understanding Please note! Shipping to non-mainland Britain may attract a surcharge. Please ask for a quote BeoCenter 8500 Manufactured: 1989 - 1992 Designer: Jacob Jensen Colours: GreySimple logical operationA light touch directly was all you needed to access its operation. The illuminated display led you logically through the programming and other functions always showing you what to do next. This ease and simplicity of use was the first impression you obtained of the music system. And equally easy to use was the optional remote control terminal.Entertainment and information from three reliable sourcesYou could preset up to 20 FM and AM stations on the receiver. And when you made your choice, search and fine tuning were completely automatic. The CD player which accommodated both 12cm and 8cm compact discs was also ready for your commands. It gave you instant access to a specific track anywhere on the disc and allowed you to change the order in which the tracks were played, or to simply choose only those tracks you wished to listen to. Technology at its most convenient best. The fine art of control of Beocenter 8500 The unfailing sensi-touch control of the works through a condenser effect. A graphite area is printed on the underside of the glass panel, and charged with a high frequency current. Even the lightest touch of a finger will spark the reaction.Beocenter 8500For individuals who could live without time-programming but wanted the advanced features of the 9500, Bang & Olufsen created the Beocenter 8500. There was no difference in the quality of the sound, but the cabinet was finished in a soft grey as an alternative to the polished aluminium finish of the 9500 BeoCenter 8500 Product SpecificationsTypes: EU 2506 (1989 - Feb 1994) GB 2507 (1989 - Dec 1993) AUS 2510 (1989 - Dec 1993) J 2509 (1989 - Dec 1993) US 2508 (1989 - Dec 1993) Amplifier: Long-term max. output power: IEC 2 x 80 watts / 8 ohms Total harmonic distortion IHF: < 0.1 % & 30 watts 20 - 20,000 Hz Dynamic headroom 1 dB: / 8 ohms Intermodulation IHF: < 0.1 % Bass control at 40 Hz: +/- 10 dB Treble control at 12,500 Hz: +/- 8 dB Tape recorder: Compact cassette C46 - C120 Recording system HX PRO Tape head Sendust Wow and flutter DIN < 0.15 % Frequency range chrome 30 - 18,000 Hz +/- 3 dB Signal-to-noise ratio CCIR/ARM Metal Dolby NR B:>64 dB, C: >73 dB Chrome Dolby NR B:>65 dB, C: >74 dB Ferro Dolby NR B:>63 dB, C: >72 dB Power supply: 110 - 130 - 220 - 240 voltage switch Power consumption Max. 200 W Dimensions W x H x D 76 x 11 x 34cm Weight 14 kg Tuner: FM range: 76 - 90 MHz (Type 2509, 2513) 87.5 - 108 MHz (Type 2506, 2508, 2510, 2511, 2512, 2514) LW range 2506, 2511: 150 - 350 kHz MW range 2506, 2508, 2509, 2510, 2511, 2512, 2513, 2514520 - 610 kHz Compact disc player: Frequency range 3 - 20,000 Hz +/- 0.3 dB Signal-to-noise ratio > 100 dB / 110 dB A-weighted Dynamic range > 96 dB Harmonic distortion 0.0025 % at 0 dB 0.0025 % at -20 dB Channel separation > 101 dB Converter system 2 x 16 bit, 4 x oversampling Low pass filter analogue Bessel Connections: Beocord Tape 1 Built-in Beocord Tape 2 7-pin DIN, Datalink Beogram CD Built-in Beogram LP 7-pin DIN, Datalink BeoLab 2 x Power Link Beovox 4-pin DIN Beovision 7-pin DIN, DatalinkOn 27-May-23 at 16:15:58 BST, seller added the following information: Lower glass isnt broken as such, if you look closely at the 3rd photo theres a chip at the bottom right

Powers on Load worksSounded great hooked together Has remote no issues

Bang & Olufsen Beocenter 2800 Record Player Radio Untested. This music centre is untested and comes without speakers. Here is what I know. 1.The turntable spins and changes speed and I am told it works and i dont see why it wouldnt but would need a stylus to test. 2.I have plugged in but no lights come up on the radio functions so Im not sure if it works. 3.The front buttons are quite sticky and dont pop straight out. 4.Lid is good - no cracks 5.It comes with original polystyrene padding for turntable and tone arm plus original manual. 6.Will be securely packaged and insured for delivery. Hopefully it works or is an easy fix ,otherwise lots of good spares.