The listing is for one single woofer. Part number is ZZ10129. This unit is used in all B&W DM602, DM603 and DM604 Series 1 speakers. The woofer is fully working and sounds great. It’s in a good cosmetic condition with no any noticeable imperfections. The rubber part is soft and responsive. Please ask if you want to see anything in details. We will try to make more close-up photos upon request. Please ask if you need any other used B&W genuine parts. We might get them for you.

Bowers & Wilkins ZZ11444 bass driver. B&W Speaker to fit Dm 604 603 605 S2 and others great condition. Excellent no defects tested and working perfectly. 2 available. Listing is for one item. Trim ring and gasket included both in excellent condition. International bids welcome.

Please note that the tweeter has a barely noticeable dent on its dome. It’s so insignificant that camera doesn’t even see it. The listing is for one single tweeter. Please ask if you need any other used B&W genuine parts. I might get them for you. Part number is ZZ10111. This unit is used in all Series 1 B&W DM601 DM602 DM603 DM604 speakers. The tweeter is fully working and sounds great. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. It will be packed very carefully for safe travel to anywhere in the world.

TWEETER HAS A DENT BUT WORKS,WASHER INCLUDED,PLEASE SEE PHOTOS

Bowers & Wilkins (B&W) DM603 S1 Speakers. Used with wear and tear as to be expected for speakers over 20 years old. Despite the scuffs they still perform superbly and are a great addition to any home audio system or surround sound. Spikes for feet and terminal bindings included.

Verkaufe ein Paar sehr gut erhaltene Standboxen Bowers & Wilkins DM603 S3. => Gesamtpreis fr 2 Stck (L/R). Original schwarzes Gehuse, wurden in matt grau an den Seiten foliert. Zustand: sehr gut, KEINE Beschdigungen an Hochton-Kalotten oder Membranen. Privatverkauf - Besichtigung und Abholung in 18311 Ribnitz-Damgarten. Versand ist leider nicht mglich.

Bowers Wilkins B&W DM 603 604 S2 ETC Foam Port Bungs. 1 to 2 centimetres trimmed off to remove damage still fit and work efficiently. These came with my dm603 s2 and they fit into the rear port.

B&W BOWERS & WILKINS DM603 S2 FLOOR STANDING SPEAKERS. Check out all images. I’ve not used in a few years. They have been stored in my shed until I created space. It’s time for them to go. Price is low due to looks, speaker covers are broken but can be fixed with glue. Pick up only SL3 - M4- J5

Bowers & Wilkins ZZ11444 bass driver. B&W Speaker to fit Dm 604 603 S2 and others great condition. Excellent no defects tested and working perfectly. 2 available. Listing is for one item. Trim ring and gasket included both in excellent condition. International bids welcome.

The speakers are in fully working condition and produce excellent sound. However, their cosmetic condition shows signs of wear and tear, including chips, scratches, and dents throughout. The bottom part of the speakers has been repaired and painted with black paint in an unprofessional manner. Additionally, the tweeters have a few minor dents. I encourage you to review all 17 photos provided and let me know if you would like to see any specific details. If necessary, I can arrange for more close-up photos upon request. Please be aware that despite the cosmetic imperfections, these issues do not affect the sound quality. The speakers are renowned for their outstanding audio performance and are considered one of the best-sounding models ever produced by B&W. To obtain dimensions and detailed specifications, I recommend inspecting the last photo, which is a screenshot from the manual. The speakers come from a smoke-free environment. Although they do not include front grilles, please inform me if you require them, as I may be able to provide them for an additional cost. For safe transportation worldwide, the speakers will be carefully packed using multilayer cardboard. Depending on availability, we may be able to include some wires free of charge. Please remember to inquire about this. Feel free to reach out with any further inquiries or questions you may have.

Please note that the woofer which is crossed out with the red cross is missing! Despite this, both speakers are fully functional, although they do possess some cosmetic flaws. Please inspect all 20 photos carefully. The tweeters on both speakers have dents, and the remaining woofer exhibit slight dryness to its rubber without any cracks or holes. It remains soft and have not hardened as yet. The centre cap has cracks. A few grommets are missing, and it would be beneficial to replace them in order to securely hold the grilles in place, as the current ones have dried out. The speakers also exhibit some chips and scratches, as depicted in the provided photos. One of the grilles is missing a peg and has a tear in the fabric. It is important to emphasize that all of the issues are purely cosmetic in nature. The sound quality of the speakers is not compromised in any way, and they are in excellent working condition, producing great sound. These speakers originate from a smoke-free environment and possess sequential serial numbers. To ensure their safe transportation, they will be carefully packed using multi-layered cardboard, suitable for shipping worldwide. For dimensions and detailed specifications please inspect the last photo which is a screenshot from the manual. As a gesture, we may include some wires at no additional cost, depending on availability. Please don't hesitate to inquire about this when making your request.

This listing is for a single tweeter, which is compatible with all B&W DM600, DM601, DM602.5, DM603, DM604, and S3 Series speakers. The tweeter is in excellent condition, functions perfectly, and produces exceptional sound quality. Though there is a tiny mark on the dome, it is barely visible and difficult for the camera to capture. Please examine the photos for further inspection. If you require other used authentic parts from B&W, kindly let us know, as we may be able to acquire them for you.

Bowers & Wilkins ZZ11444 bass driver. B&W Speaker to fit Dm 604 603 605 S2 and others great condition. Excellent no defects tested and working perfectly. 2 available. Listing is for one item. Trim ring and gasket included both in excellent condition. International bids welcome.

Bowers Wilkins B&W DM 603 604 S2 ETC Foam Port Bungs. 1 to 2 centimetres trimmed off to remove damage still fit and work efficiently. These came with my dm603 s2 and they fit into the rear port.

The listing is for one single tweeter. This unit is used in all B&W DM600 S3, DM601 S3, DM602 S3, DM602.5 S3, DM603 S3, DM604 S3 speakers. The tweeter is fully working. Pristine. No creases or tears. Please inspect the photos.

The listing is for one single tweeter. This unit is used in all B&W DM600 S3, DM601 S3, DM602 S3, DM602.5 S3, DM603 S3, DM604 S3 speakers. The tweeter is fully working. Minor crease to the foil, but no holes or tears so still sounds as it should. Please inspect the photos. This is a black tweeter, this tweeter also come in grey but has a different part number. Please make sure it is the black tweeter that is required for your speaker.

B&W BOWERS & WILKINS DM603 S2 FLOOR STANDING SPEAKERS. Check out all images. I’ve not used in a few years. They have been stored in my shed until I created space. It’s time for them to go. Price is low due to looks, speaker covers are broken but can be fixed with glue. Pick up only SL3 - M4- J5

Bowers & Wilkins ZZ11444 bass driver. B&W Speaker to fit Dm 604 603 S2 and others great condition. Excellent no defects tested and working perfectly. 2 available. Listing is for one item. Trim ring and gasket included both in excellent condition. International bids welcome.

Bowers & Wilkins DM603 S2 Floorstanding Speakers in Cherry Finish. 99p NO RESERVE Up for sale Bowers & Wilkins DM603 S2 Floorstanding Speakers in very good cosmetically condition. Cabinets in age related imperfections - please review attached photos. Fully functional. System type2.5-way Enclosure typeBass-reflex Frequency response ± 3dB48 - 20000 Hz Nominal impedance8 Ohm Amplifier Requirements25 - 180 W Sensitivity (2.83V/1m)90 dB Tweeter25mm (1 in) metal dome Midrange180mm (7 in) woven Kevlar cone Woofer180mm (7 in) paper/Kevlar cone Dimensions (H x W x D)850 x 236 x 306 mm / 33.46 x 9.29 x 12.05 in. Weight19.0 kg / 41.8 lbs Please review all attached photos carefully to be sure of what you’re buying. Photos are part of description. I’m happy to answer any questions you have, just drop a message before auction end. This is a used item described to the best of my ability, it may not be perfect in every way. Worldwide Shipping using eBay Global Shipping Programme Please be advised to contact myself or eBay where appropriate to enquire about the shipping charges to the destination address for overseas purchases. eBay/PayPal Payment or Cash on Collection Once payment is received, I will leave feedback and hope you will do the same when you have received your item in good order. If you do not feel happy about any aspect of our transaction or received item, please contact me in the first instance so I can do my best to resolve any issues. If you are a person who appreciates the quality of NEAT music, please take a look at my other bargains/ items for sale too on eBay Any goods damaged in transit should be reported within 24 hours of receiving it and would request to take clear pictures of the damages. Also, in this situation please do not throw the original packing away as the courier companies request them for investigation. RETURN POLICY If you are not satisfied with your item I can offer a full refund (excluding postage and packaging costs). Items must be returned within 14 days and in the same condition as you received them, all items will be checked upon return before a refund is issued. Please contact me before returning an item so that I may have an opportunity to sort out any concerns and know why you are returning the item. Thank you

Bowers Wilkins DM 603 S2 (could also be S1) black ash veneer Cabinet Case Great Condition Inc spikes With crossover. Crossover tested and working as new on all outputs. Couple of age related marks that are hardly visable unless up close. Spike feet included. Can also include trim rings bolts and gaskets at the right price. This would be perfect for someone out there if their 603 s2 cabinets are damaged but drivers are still great quick and simple change around. Collection preferred and if you bring me your damaged cabinet will swap round for free. Can also send if you cannot make it here (I will help you through the change over if require via video link). I also have another cabinet in even better matching (consequetive s numbers) condition than this one so am happy for you to message me and come to some arrangement. Also happy to ship globally . If shipped will be extremely well packaged. Take care and happy bidding. Linadda.

BOWERS & WILKINS B&W BRAND. MODEL DM603. SELLING ONE PAIR OF CROSSOVERS/SPEAKER TERMINALS FOR THIS SPEAKER SYSTEM. TESTED & WORKS GREAT. DATED 1997. PART # XO 2210094. COMPLETE WITH ALL WIRES THAT ARE ATTACHED. PLEASE BE AWARE SALES TAX MAYBE BE ADDED DEPENDING ON YOUR STATES POLICIES++ MADE IN ENGLAND. THEY WILL BE PACKED WELL. ++note USPS NOW HAS A $15.00 SURCHARGE FOR LARGER BOXES++note USPS is taking longer these days to deliver packages. I OFFER NO GUARANTEE OR WARRANTY OFFERED. SELLING AS IS. NO REFUND OFFERED. ++I WILL COMBINE SHIPPING WHEN RELEVANT++local pick-up available. IF DAMAGED IN SHIPPING BUYER MUST MAKE A CLAIM WITH THE SHIPPER. NOT JUST USE EBAY FOR RETURN. INTERNATIONAL SHIPPING WOULD ONLY BE THRU EBAYS GLOBAL SHIPPING PROGRAM. international bidders please make sure you are familiar with ebay global shipping before bidding +++COST TO BE DETERMINED BY EBAY+++. NO REFUND OFFERED. EMAIL WITH ANY QUESTION. BID AWAY!!

B&W Bowers & Wilkins DM601, DM602, DM603 & DM604 S2 Generic Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins DM601, DM602, DM603 & DM604 S2 loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot stright into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

B&W DM603 S3 Sorrento Bowers and Wilkins 150W Speakers England. Speakers sound great. They do have some cosmetic damage as photos illustrate. The speaker grills are not in good condition.