Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL B IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 4B) [ Listing is for 1 amp - however we have 2 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

(2) BRYSTON 4B Stereo Power Amplifiers w/ Extra Power Module and (4) High Tech Wires. A perfect set-up for bi-amping your speaker system. Included is an extra out-put power module for quick session repairs if needed, although these amps are so well made, the spare module has not been used. To complete the system are (4) high-tech speaker wires from the Monster M series and MIT. These Canadian-built Bryston 4B solid-state power amplifiers are rated at 250 watts per channel into 8-ohm loads, 400 watts per channel into 4-ohm loads, and 800 watts bridged into 8 ohms. The units are rack-mountable and run cool without internal fans, making them silent.

Bryston 4B3 Cubbed - Power Amplifier (black with blue leds) in excellent condition. No original package but it will be professionaly packed in a box from a similar as a weight and size amplifier. Shipping via courier with insurance. FeaturesBalanced XLR and Single ended RCA input2 Channels each with fully independent power supplies including transformers300W into 8 ohms (and up to 500 into 4 ohms) per channelThe patented Salomie circuit found in all Cubed Series amplifiersSwitchable gain (23dB or 29dB)Fully convection cooled means no noisy fansMachined and anodized aluminum enclosure and dress panelLess than 500mW standby power consumptionSoftStart microprocessor controlled startup sequence wont trip circuit breakersDC trigger for automated turn on and turn offLegendary Bryston 20 Year Warranty

Bryston 14B-SST Amplifier. The Bryston 14BSST² is a dual channel or stereo power amplifier, which is essentially two Bryston 7B mono amplifiers that have been combined into a dual mono modular design. Each channel has 600W into 8 ohms or 900W into 4 ohms. With that sort of fire-breathing power, it has the ability to drive loudspeakers which have been considered “impossible” or even “difficult” loads in the past, very easily.The unit has a lovely, chunky black front face that has been perfectly machined. It is smooth to the touch, understated and features just a on/off switch and two led indicators. There are two carry handles at the rear of the unit and they are absolutely necessary to be able to safely handle this bulky and heavy amplifier. Trust me when I say that once it is in place,

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 4B) [ Listing is for 1 amp - however we have 2 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL B IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

(2) BRYSTON 4B Stereo Power Amplifiers w/ Extra Power Module and (4) High Tech Wires. A perfect set-up for bi-amping your speaker system. Included is an extra out-put power module for quick session repairs if needed, although these amps are so well made, the spare module has not been used. To complete the system are (4) high-tech speaker wires from the Monster M series and MIT. These Canadian-built Bryston 4B solid-state power amplifiers are rated at 250 watts per channel into 8-ohm loads, 400 watts per channel into 4-ohm loads, and 800 watts bridged into 8 ohms. The units are rack-mountable and run cool without internal fans, making them silent.

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 4B) [ Listing is for 1 amp - however we have 2 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Bryston 4Be Amplifier, Never rack mounted, Very, Very Clean, low hours... Factory shipping box. This is the super rare 4Be pro version. The e is for engineering. This model was just before the NRB.It has XLR and 1/4 TRS connections. I will include a pair of gold-plated 1/4 TRS to RCA adaptors also. The pro models have the potentiometers in the front, just above the number 4, to adjust the right and left channels independently. Brystons 4B stereo power amplifier consists of two amplifier modules, each with its own ±85v power supply, which can be operated independently or combined (MONO mode) to form a single 800 watt amplifier (8? load) in a 3 rack height chassis. Operated independently (DUAL mode) each channel can deliver 250 watts into 8? (or 400 watts into 4?). Each of the two amplifier modules use 8 of Brystons custom power transistors, for a total of 16 output devices per 4B. It has not been used for about 15 years. Sent to Bryston Canada early this year for a complete checkup. I wanted them to make sure it was operating at factory specs. Received it back in June. A copy of the receipt is included. I only opened the box to powered it on and take photos. Played it for about an hour. It sounds fantastic!!! You will not find a cleaner 4b amplifier. Only thing it needs is some new rubber stick on feet on the bottom. You can find them here on eBay pretty cheap. Never been rack mounted, no scratches on the front panel, top plate or sides. Please see all photos. Does not come with a power cord. FREE SHIPPING!!! All states except Hawaii and Alaska... No international shipping!!! Sorry.

Bryston 4B NRB 2 Channel Power Amplifier W/ Rack Handles. Condition is pre-owned. It is in excellent physical condition and looks great. It is tested and working properly. There are only a few minor dings and scratches. I tried to show these in the photos. Heavy duty rubber feet have been attached to the bottom. Comes as shown with rack handles, power cord, and owners manual reprint. It will be carefully packed for shipping, insured, and will require adult signature on delivery. DESCRIPTION/SPECS: The Bryston 4B NRB is a stereo power amplifier that can deliver high-quality sound and performance. It is a class-AB2 solid-state amplifier that uses MOSFET output devices and dual toroidal transformers. It has a slim profile and weighs 42 pound. It also has a bridging switch that allows it to operate in mono mode, delivering twice the power into a single load. The Bryston 4B NRB can produce 250 watts per channel into 8 ohms, 400 watts per channel into 4 ohms, and 800 watts in bridged mode into 8 ohms. It has a very low total harmonic distortion of less than 0.01% at 250 watts, from 20 Hz to 20 kHz. It also has a high signal-to-noise ratio of 100 dB below full output. It has a wide frequency response of 0.5 Hz to 100 kHz, +/-3 dB. It has a damping factor of over 500 at 20 Hz, which means it can control the speaker movement very well. The Bryston 4B NRB is designed to be very reliable and durable. It has a 14-gauge steel chassis that protects the internal components from external interference3. It has a modular construction that allows easy servicing and upgrading. It also has a thermal protection circuit that prevents overheating and damage. The Bryston 4B NRB is a great choice for anyone who wants a powerful and refined amplifier that can reveal the most delicate details in the musical fabric, at the same time providing seemingly endless power reserves. It is suitable for driving various types of speakers, from bookshelf to floorstanding models. It can also be paired with other Bryston components, such as preamplifiers, DACs, and CD players, to create a complete audio system. The Bryston 4B NRB is a classic amplifier that has earned many praises and awards from audiophiles and critics alike.

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 4B) [ Listing is for 1 amp - however we have 2 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL B IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift HiFi & Records, Ausgabe Juli 2002: Test-Bericht Verstärker-Kombi Bryston 25 BPS und 14B SST, Deutsche Ausgabe, German edition! Versand weltweit, perfekte Verpackung! Shipping worldwide, perfect packaging! Drucknummer, print number: ohne, without Sprache, language: Deutsch, German, D Zustand, condition: Hervorragend, excellent! Seitenanzahl, pages: 6 Format, size: 26 x 19,5 cm Gewicht, weight: 0,021 kg Bitte beachten Sie die Fotos! Note photos, please!Veuillez noter les photos!Let op de fotos!

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift HiFi Test TV Video: Bryston BP-25 und 4B ST. Deutsche Ausgabe, German edition! Versand weltweit, perfekte Verpackung! Shipping worldwide, perfect packaging! Drucknummer, print number: ohne, without Sprache, language: Deutsch, German, D Zustand, condition: Hervorragend, excellent! Seitenanzahl, pages: 4 Format, size: 29,7 x 21 cm Gewicht, weight: 0,017 kg Bitte beachten Sie die Fotos! Note photos, please!Veuillez noter les photos!Let op de fotos!