GennLab Standard Alignment Cassettes. LevelSuitable for Playback Output Level alignment of any Cassette Tape Deck. Only new 17u TDK, MAXELL or TEAC tape is used when recording. Each tape has a duration of 10 minutes, recorded at the BEGINNING of the Tape from 00 min 30 sec to 10min 30 sec Level fluctuation less than +/-0.1 dB measured. Typically +/-0.06 dB Frequency fluctuation +/-0.01% (measured)To order a Dolby Level Cassette (A-BEX TCC-130) choose the option 1-7/8 ips 200 nWb/m, 400 Hz Dolby. Set Playback Output Level of each channel to match with Dolby marks on the VU-meters scale.This Cassette can be used for decks with DD Dolby marks on VU-meters (not suitable for Nakamichi decks).To order 400 Hz Level Tape for Nakamichi tape decks alignment choose the 1-7/8 ips Nakamichi Level, 400 Hz, A or Boption. Follow the procedures of the Nakamichi Service Manuals for those decks. These Cassettes are equivalent to Nakamichi DA09005A or B Test Cassettes.To order DIN Level Cassette choose the 1-7/8 ips 250 nWb/m 315 Hz 0dB DIN/IEC option. Suitable for Playback Output Level alignment of European and Tascam122mk3, 112Rmk2, 112mk2, 134B SYNCASET Cassette Tape Decks. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale.To order Tascam 122mk3 Standard Level Cassette choose the 1-7/8 ips Tascam 122mk3 0 VU option. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale.To order DIN 3-3/4 ips Level Cassette choose the 3-3/4 ips 250 nWb/m, 315 Hz DIN option.To order Pioneer Standard Level Cassette equivalent to the Level portion of Pioneer STD-331A/341A cassettes choose the 1-7/8 ips Pioneer Level 0 dB 333 Hz option. Suitable for Playback Output Level alignment of Pioneer (ST-F1250 etc.), Philips and SONY (European version) Cassette Tape Decks. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale. The set of this cassette plus Frequency Response Cassettes (333 Hz, 6.3 kHz, 10 kHz) is equivalent to Pioneer STD-341A cassettes.The set of this cassette plus Frequency Response Cassettes (333 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz) is equivalent to Pioneer STD-331A cassettes.To order Pioneer Standard Level Cassette equivalent to the Level portion of Pioneer STD-331B cassettes choose the 1-7/8 ips Pioneer Level 0 dB 315 Hz option. The set of this cassette plus Frequency Response Cassettes (40Hz, 63Hz, 125Hz, 250Hz, 315Hz, 500Hz, 1kHz, 2kHz, 4kHz 6.3 kHz, 8 kHz, 10kHz, 12.5kHz, 14kHz) is equivalent to Pioneer STD-331B cassettes.To order Tandberg Standard Level Cassette choose the Tandberg Cass. No.24, 250 nWb/m, 1000 Hz option. Suitable for Playback Output Level alignment of Tandberg cassette decks (TCD-910 etc.). This cassette is equivalent to Tandberg test cassette No.24 cassettes.To order a 15 ips Duplicator Standard Level Cassette choose the 15 ips Duplicator 160 nWb/m, 315 Hz DIN/IEC or 15 ips Duplicator 250 nWb/m, 333 Hz DIN/IEC from the Cassette Fluxivity Level option. Suitable for Playback Output Level alignment of cassette duplicators (OTARI DP-4050C2 etc.).One tone is recorded on each Cassette at the level corresponding to the Equalization curve and Reference Fluxivity.Please specify Cassette Speed, Level and Frequency.

GennLab Standard Alignment Cassettes.1 kHz, 3 kHz or 3.15 kHz Speed, Wof & Flutter.Please note. These cassettes are 3 kHz FREQUENCY cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for tape speed alignment of Cassette Tape Decks using Frequency Counter and W&F Meter.Only new TDK, MAXELL or TEAC 17u tape is used when recording.Time Constant: 3180us + 120us. Frequency: 1 kHz, 3 kHz or 3.15 kHz. Frequency fluctuation: +/-0.01% measured.Level: -10 dB re 0 dB 160 nWb/m @ 400 Hz for 3 kHz NAB tapes (Nakamichi DA09006A); -10 dB re 0 dB 250 nWb/m @ 315 Hz for 3,15 kHz DIN tapes; -10 dB re 0 dB 250 nWb/m @ 315 Hz for Tandberg 1 kHz DIN tapes. Duration: 5 min recorded at the BEGINNING of the Tape from 00 min 30 sec to 5min 30 sec;The residual W&F of the tape itself is 0.022 % RMS WEIGHTED measured to NAB / JIB C5551 Standards using for playback the same MX5050 Reel to Reel tape recorder the tape has been recorded on. A few measurements of the same tape portion have been done using a Neutrik A2 analizer. The results from 0.008% to 0.036% averaged to 0.022%. A cassette reproduced using our Nakamichi Dragon showed 0.014% to 0.057% averaged to 0.035%. Cassette Tape Deck speed alignmentThe tape frequency reading gradually drops slowly towards the end of 5 min. portion of the tape. This is normal, and it depends on the deck mechanism condition. To check your deck mechanism condition do following: 1. Read the deck Speed specifications (1-7/8 +/- ….%). 2. Calculate +/-….Hz tolerance from 1000, 3000 or 3150 Hz. 3. Playback ANY tape for 2 minutes to warm up motors and mechanism. 4. Playback the 1, 3 or 3.15 kHz Speed tape from the beginning of the tape for 1 min. Note the frequency in Hz at the end of the 1 min. portion of the tape. Say this is the Frequency at the Beginning of the Speed tape. 5. Stop the deck. Flip over the cassette. The 1 min. portion becomes the last minute of the tape. 6. Playback the tape from that 1 min. position and note the frequency in Hz at the beginning of that 1 min. portion of the tape. Say this is the Frequency at the End of the Speed tape. 7. Check if the frequency difference in Hz is within the decks Speed specifications tolerance. If not, a number of things could be the reason: too high back tension of the supply reel (dirty friction felt or misalignment), not enough friction in the capstan-pinch roller pair (dirty or dried out pinch roller), dried out capstan bearings lubrication, dried out and loose capstan belt, dried out motor bearings lubrication etc. 8. Finally, calculate the Average Frequency. F average = (F beginning + F end)/2. Calculate the Average Frequency Deviation from the Tape Nominal Frequency. Deviation = F average - F nominal. Adjust speed of the deck to obtain minimum possible Deviation.3kHz or 3.15kHz 1-7/8 4.76 cm/sec Speed Cassette is suitable for tape speed alignment of any Normal-speed Cassette Tape Deck (Nakamichi DA09006A).3kHz or 3.15kHz 15/16 ips 2.38 cm/sec Speed Cassette is suitable for tape speed alignment of any Low-speed Cassette Tape Deck (e.g. Nakamichi 680ZX).3 kHz or 3.15kHz 3-3/4 ips 9.53 cm/sec Speed Cassette is suitable for tape speed alignment of any Hi-speed Cassette Tape Deck.Tandberg Cass. No.21, 1000 Hz, 1-7/8 ips - 4.7625 cm/sec Speed Cassette is suitable for tape speed alignment of Tandberg cassette tape decks(TCD-910 etc.)To order a 7-1/2 ips or 15 ips Duplicator Speed Standard Calibration Cassette choose the Duplicator option. Suitable for Speed alignment of cassette duplicators (Otari DP-4050C2 etc.).Please specify Cassette Speed and Frequency.

GennLab Standard Alignment Cassettes Frequency Response (FR) Please note. These cassettes are LEVEL cassettes (not 90 degrees ANGLE cassettes). They CAN NOT be used for final Azimuth adjustment.To perform playback frequency response test, set Playback Head Azimuth for maximum output for EACH Frequency Response cassette INDIVIDUALLY.On completion of playback frequency response test, finally set Playback Head Azimuth for maximum output and minimum difference in phase between channels using AZIMUTH cassettes. Suitable for Playback Frequency Response adjustment of any Cassette Tape Deck using AC millivoltmeter.Recorded -20dB below Reference Fluxiviti Level. See the options below.Level fluctuation: less than +/-0.2 dB measured. Typically +/-0.1 dBFrequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 30 min (NOT suitable for final azimuth adjustments).Duration of each Tape 10 min recorded at the BEGINNING of the Tape from 00 min 30 sec to 10min 30 sec. Please specify Cassette Equalization Standard from the options below: Type I Ferro NAB 160nWb/m. Time Constants: 3180us + 120us,Type II CrO NAB 160nWb/m. Time Constants: 3180us + 70u,Nakamichi SX. Time Constants: 3180us + 70us,Type I Ferro NAB 200nWb/m. Time Constants: 3180us + 120us,Type II CrO NAB 200nWb/m. Time Constants: 3180us + 70us,Pioneer Type I Ferro. Time Constants: 3180us+120us, -20 dB,Pioneer Typ II CrO2, Time Constants: 3180us+70us -20 dB,SONY Type I Ferro. Time Constants: 3180+120us, -20dB re 315Hz Level cassette,SONY Type I Ferro. Time Constants: 3180+120us, -20dB re 333Hz Level cassette,Type II CrO2 DIN 250nWb/m -20dB 3180us + 70us,Tascam 122mk3 Fr. Resp. Time Constants: 3180us + 120us,3-3/4 ips FR DIN 250 nWb/m -10 dB Time Constants: 3180+50us. Following frequencies can be recorded:20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz,250 Hz, 315 Hz (DIN Reference), 333 Hz (Philips Reference), 400 Hz (Nakamichi reference), 500 Hz, 630 Hz, 700 Hz,800 Hz, 1 kHz, 1.25 kHz,1.6 kHz, 2 kHz, 2.5 kHz,3 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 7.5 kHz, 8 kHz, 10 kHz, 12 kHz, 12.5 kHz, 14 kHz, 15 kHz, 16 kHz, 18 kHz, 20 kHzPleas specify Cassette Frequency from the options above.

NEWSony TC-WE605S Dual Cassette Deck Auto reverse Auto Calibration Dolby S Noise.

Condition DescriptionThis item is only to be checked for energization. Please be able to take parts and repair it. Please purchase with your understanding. Please check the pictures for scratches. Please Note shipping from Japan. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Up for sale is a speed/flutter, azimuth calibration cassette for cassette recorders and players. For the speed adjustment a signal of 3khz at 0db has been recorded on the side A of cassette. You will need a multimeter with frequency counter option hooked up to line out of your deck or your phone with a frequency counter app. Just adjust the speed adjustment pot to set the frequency as close to 3000 Hz as possible. For the azimuth adjustment a signal of 10khz at -10db has been recorder on the side B of cassette. You will need a multimeter hooked up to line out and adjust the azimuth screw measuring the maximum ac voltage you can get. I used my late serial number Nakamichi Dragon to record the 3 Khz test tone as the tape speed is factory adjusted and fixed and the W&F of the deck is close to 0.015%, maybe the lowest you can get from a cassette deck. To record the 10khz test tone I calibrated the playback head of my BX-300 deck using a new sealed BASF IEC/DIN standard calibration tape (picture n.4) and my oscilloscope, and each test tape I record, I use the oscilloscope to calibrate the record head as much accurate as possible, just to prevent any cassette shell imperfections. I use only NEW TDK D-30 or Maxell C-30 cassettes. This cassette is not an original test tape, but you can get pretty accurate results adjusting your deck using it. Check my feedback for this item. I moved recently in US from Greece, where I was working in Greek Nakamichi service during 90s and I have all the professional equipment (original test tapes, oscilloscope, wow & flutter meter, distortion meter, frequency response meter). If you need to service your deck Ill be happy to help you. See also my other items and my feedback. Thank you for looking.

Condition DescriptionThis item is only to be checked for energization. Please be able to take parts and repair it. Please purchase with your understanding. Please check the pictures for scratches. Please Note shipping from Japan. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

GennLab Standard Alignment Cassettes Frequency Response (FR) Please note. These cassettes are LEVEL cassettes (not 90 degrees ANGLE cassettes). They CAN NOT be used for final Azimuth adjustment.To perform playback frequency response test, set Playback Head Azimuth for maximum output for EACH Frequency Response cassette INDIVIDUALLY.On completion of playback frequency response test, finally set Playback Head Azimuth for maximum output and minimum difference in phase between channels using AZIMUTH cassettes. Suitable for Playback Frequency Response adjustment of any Cassette Tape Deck using AC millivoltmeter.Recorded -20dB below Reference Fluxiviti Level. See the options below.Level fluctuation: less than +/-0.2 dB measured. Typically +/-0.1 dBFrequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 30 min (NOT suitable for final azimuth adjustments).Duration of each Tape 10 min recorded at the BEGINNING of the Tape from 00 min 30 sec to 10min 30 sec. Please specify Cassette Equalization Standard from the options below: Type I Ferro NAB 160nWb/m. Time Constants: 3180us + 120us,Type II CrO NAB 160nWb/m. Time Constants: 3180us + 70u,Nakamichi SX. Time Constants: 3180us + 70us,Type I Ferro NAB 200nWb/m. Time Constants: 3180us + 120us,Type II CrO NAB 200nWb/m. Time Constants: 3180us + 70us,Pioneer Type I Ferro. Time Constants: 3180us+120us, -20 dB,Pioneer Typ II CrO2, Time Constants: 3180us+70us -20 dB,SONY Type I Ferro. Time Constants: 3180+120us, -20dB re 315Hz Level cassette,SONY Type I Ferro. Time Constants: 3180+120us, -20dB re 333Hz Level cassette,Type II CrO2 DIN 250nWb/m -20dB 3180us + 70us,Tascam 122mk3 Fr. Resp. Time Constants: 3180us + 120us,3-3/4 ips FR DIN 250 nWb/m -10 dB Time Constants: 3180+50us. Following frequencies can be recorded:20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz,250 Hz, 315 Hz (DIN Reference), 333 Hz (Philips Reference), 400 Hz (Nakamichi reference), 500 Hz, 630 Hz, 700 Hz,800 Hz, 1 kHz, 1.25 kHz,1.6 kHz, 2 kHz, 2.5 kHz,3 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 7.5 kHz, 8 kHz, 10 kHz, 12 kHz, 12.5 kHz, 14 kHz, 15 kHz, 16 kHz, 18 kHz, 20 kHzPleas specify Cassette Frequency from the options above.

GennLab Standard Alignment Cassettes.1 kHz, 3 kHz or 3.15 kHz Speed, Wof & Flutter.Please note. These cassettes are 3 kHz FREQUENCY cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for tape speed alignment of Cassette Tape Decks using Frequency Counter and W&F Meter.Only new TDK, MAXELL or TEAC 17u tape is used when recording.Time Constant: 3180us + 120us. Frequency: 1 kHz, 3 kHz or 3.15 kHz. Frequency fluctuation: +/-0.01% measured.Level: -10 dB re 0 dB 160 nWb/m @ 400 Hz for 3 kHz NAB tapes (Nakamichi DA09006A); -10 dB re 0 dB 250 nWb/m @ 315 Hz for 3,15 kHz DIN tapes; -10 dB re 0 dB 250 nWb/m @ 315 Hz for Tandberg 1 kHz DIN tapes. Duration: 5 min recorded at the BEGINNING of the Tape from 00 min 30 sec to 5min 30 sec;The residual W&F of the tape itself is 0.022 % RMS WEIGHTED measured to NAB / JIB C5551 Standards using for playback the same MX5050 Reel to Reel tape recorder the tape has been recorded on. A few measurements of the same tape portion have been done using a Neutrik A2 analizer. The results from 0.008% to 0.036% averaged to 0.022%. A cassette reproduced using our Nakamichi Dragon showed 0.014% to 0.057% averaged to 0.035%. Cassette Tape Deck speed alignmentThe tape frequency reading gradually drops slowly towards the end of 5 min. portion of the tape. This is normal, and it depends on the deck mechanism condition. To check your deck mechanism condition do following: 1. Read the deck Speed specifications (1-7/8 +/- ….%). 2. Calculate +/-….Hz tolerance from 1000, 3000 or 3150 Hz. 3. Playback ANY tape for 2 minutes to warm up motors and mechanism. 4. Playback the 1, 3 or 3.15 kHz Speed tape from the beginning of the tape for 1 min. Note the frequency in Hz at the end of the 1 min. portion of the tape. Say this is the Frequency at the Beginning of the Speed tape. 5. Stop the deck. Flip over the cassette. The 1 min. portion becomes the last minute of the tape. 6. Playback the tape from that 1 min. position and note the frequency in Hz at the beginning of that 1 min. portion of the tape. Say this is the Frequency at the End of the Speed tape. 7. Check if the frequency difference in Hz is within the decks Speed specifications tolerance. If not, a number of things could be the reason: too high back tension of the supply reel (dirty friction felt or misalignment), not enough friction in the capstan-pinch roller pair (dirty or dried out pinch roller), dried out capstan bearings lubrication, dried out and loose capstan belt, dried out motor bearings lubrication etc. 8. Finally, calculate the Average Frequency. F average = (F beginning + F end)/2. Calculate the Average Frequency Deviation from the Tape Nominal Frequency. Deviation = F average - F nominal. Adjust speed of the deck to obtain minimum possible Deviation.3kHz or 3.15kHz 1-7/8 4.76 cm/sec Speed Cassette is suitable for tape speed alignment of any Normal-speed Cassette Tape Deck (Nakamichi DA09006A).3kHz or 3.15kHz 15/16 ips 2.38 cm/sec Speed Cassette is suitable for tape speed alignment of any Low-speed Cassette Tape Deck (e.g. Nakamichi 680ZX).3 kHz or 3.15kHz 3-3/4 ips 9.53 cm/sec Speed Cassette is suitable for tape speed alignment of any Hi-speed Cassette Tape Deck.Tandberg Cass. No.21, 1000 Hz, 1-7/8 ips - 4.7625 cm/sec Speed Cassette is suitable for tape speed alignment of Tandberg cassette tape decks(TCD-910 etc.)To order a 7-1/2 ips or 15 ips Duplicator Speed Standard Calibration Cassette choose the Duplicator option. Suitable for Speed alignment of cassette duplicators (Otari DP-4050C2 etc.).Please specify Cassette Speed and Frequency.

GennLab Standard Alignment Cassettes. LevelSuitable for Playback Output Level alignment of any Cassette Tape Deck. Only new 17u TDK, MAXELL or TEAC tape is used when recording. Each tape has a duration of 10 minutes, recorded at the BEGINNING of the Tape from 00 min 30 sec to 10min 30 sec Level fluctuation less than +/-0.1 dB measured. Typically +/-0.06 dB Frequency fluctuation +/-0.01% (measured)To order a Dolby Level Cassette (A-BEX TCC-130) choose the option 1-7/8 ips 200 nWb/m, 400 Hz Dolby. Set Playback Output Level of each channel to match with Dolby marks on the VU-meters scale.This Cassette can be used for decks with DD Dolby marks on VU-meters (not suitable for Nakamichi decks).To order 400 Hz Level Tape for Nakamichi tape decks alignment choose the 1-7/8 ips Nakamichi Level, 400 Hz, A or Boption. Follow the procedures of the Nakamichi Service Manuals for those decks. These Cassettes are equivalent to Nakamichi DA09005A or B Test Cassettes.To order DIN Level Cassette choose the 1-7/8 ips 250 nWb/m 315 Hz 0dB DIN/IEC option. Suitable for Playback Output Level alignment of European and Tascam122mk3, 112Rmk2, 112mk2, 134B SYNCASET Cassette Tape Decks. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale.To order Tascam 122mk3 Standard Level Cassette choose the 1-7/8 ips Tascam 122mk3 0 VU option. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale.To order DIN 3-3/4 ips Level Cassette choose the 3-3/4 ips 250 nWb/m, 315 Hz DIN option.To order Pioneer Standard Level Cassette equivalent to the Level portion of Pioneer STD-331A/341A cassettes choose the 1-7/8 ips Pioneer Level 0 dB 333 Hz option. Suitable for Playback Output Level alignment of Pioneer (ST-F1250 etc.), Philips and SONY (European version) Cassette Tape Decks. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale. The set of this cassette plus Frequency Response Cassettes (333 Hz, 6.3 kHz, 10 kHz) is equivalent to Pioneer STD-341A cassettes.The set of this cassette plus Frequency Response Cassettes (333 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz) is equivalent to Pioneer STD-331A cassettes.To order Pioneer Standard Level Cassette equivalent to the Level portion of Pioneer STD-331B cassettes choose the 1-7/8 ips Pioneer Level 0 dB 315 Hz option. The set of this cassette plus Frequency Response Cassettes (40Hz, 63Hz, 125Hz, 250Hz, 315Hz, 500Hz, 1kHz, 2kHz, 4kHz 6.3 kHz, 8 kHz, 10kHz, 12.5kHz, 14kHz) is equivalent to Pioneer STD-331B cassettes.To order Tandberg Standard Level Cassette choose the Tandberg Cass. No.24, 250 nWb/m, 1000 Hz option. Suitable for Playback Output Level alignment of Tandberg cassette decks (TCD-910 etc.). This cassette is equivalent to Tandberg test cassette No.24 cassettes.To order a 15 ips Duplicator Standard Level Cassette choose the 15 ips Duplicator 160 nWb/m, 315 Hz DIN/IEC or 15 ips Duplicator 250 nWb/m, 333 Hz DIN/IEC from the Cassette Fluxivity Level option. Suitable for Playback Output Level alignment of cassette duplicators (OTARI DP-4050C2 etc.).One tone is recorded on each Cassette at the level corresponding to the Equalization curve and Reference Fluxivity.Please specify Cassette Speed, Level and Frequency.

GennLab Standard Alignment (calibration) Cassettes equivalent to Pioneer Calibration CassettesOne of the following cassettes can be ordered.GLPIC-301. Tape speed WOW & Flutter. -10dB at 3 kHz, Equivalent to Pioneer STD-301 cassettes.GLPIC-331 (GL-331). Multifrequency, 250 nWb/m at 333 Hz, 1590+120usec. 0dB 333Hz, -20dB 333Hz reference, 10kHz - 40Hz Freq. Response. Equivalent to Pioneer STD-331 cassettes.GLPIC-331A (GL-331A). Multifrequency, 250 nWb/m at 333 Hz, 3180+120usec. 0dB 333Hz, -20dB 333Hz reference, 14kHz - 40Hz Freq. Response. Equivalent to Pioneer STD-331A cassettes.GLPIC-334 (GL-334). Multifrequency, 250 nWb/m at 333 Hz, 1590+120usec. 0dB 333Hz, -10dB 10kHz, -20dB 333Hz reference, 6.3kHz Freq. Response. Equivalent to Pioneer STD-334 cassettes.GLPIC-341 (GL-341). Multifrequency, 250 nWb/m at 333 Hz, 1590+120usec. 0dB 333Hz, -20dB 10kHz, 333Hz reference, 6.3kHz Freq. Response. Equivalent to Pioneer STD-341 cassettes.GLPIC-341A (GL-341A). Multifrequency, 250 nWb/m at 333 Hz, 3180+120usec. 0dB 333Hz, -20dB 10kHz, 333Hz reference, 6.3kHz Freq. Response. Equivalent to Pioneer STD-341A cassettes.GLPIC-331B (GL-331B). Multifrequency, 160 nWb/m 315 Hz, 3180+120usec. 0dB 315Hz, -20dB 6.3kHz 10kHz azimuth, 315Hz reference, 14kHz - 40Hz Freq. Response. Equivalent to Pioneer STD-331B cassettes.GLPIC-331E (GL-331E). Multifrequency, 250 nWb/m 315 Hz, 3180+120usec. 0dB 315Hz, -20dB 6.3kHz 10kHz azimuth, 315Hz reference, 14kHz - 40Hz Freq. Response. Equivalent to Pioneer STD-331E cassettes.

GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).

Speed Calibration Test Tape for Cassette Deck or Walkman Content: 3000 Hz Sinus Signal @ 0dBLocation: Side One (first 15 min)Recording Deck: Akai GX-95 Tape length: C-60 Its require the digital multimeter that can measure frequency in Hzand connect wires to line out on your cassette deck.Otherwise, it could be done on PC with soft found online.For walkman make sure that volume set in full with Dolby Off. Please check the link for video on youtube: https://www.youtube.com/watch?v=MmULTnPY3Ws

This item is in full working condition with normal wear. Please look at the pictures for exact cosmetic condition. We offer no-questions-asked 30 day returns. Sony TC-WE605S Dual Cassette Deck Auto reverse Auto Calibration Dolby S Noise re Click images to enlarge Description Thank you for choosing us We have over 15 years of experience selling on Ebay. If you have any questions, please ask any questions through Ebay Messages  All of our items are inspected and described through pictures to accurately depict the condition. Exactly what is pictured is included.    ALL ITEMS COME WITH A NO-QUESTIONS-ASKED 30 DAY WARRANTY.  Item Condition: This item is in full working condition with normal wear.  Please examine pictures for the cosmetic condition. Payment We accept many forms of payment. Please send a message with any questions. Shipping We do our best to ensure the safety of your purchased item. We do this by using only the best packing materials. We will ship your item within 1 business day after your item is paid for. Our primary carriers are USPS and FEDEX. We ship all of our items worldwide. We use the United States Postal Office as our primary carrier for international items. Please contact us through EBAY MESSAGES to get a quote. For Freight Shipping: All items with shipping over $100 are considered freight items. The listed price is going to a business address. Schools, residences, churches and simliar places dont count as a business as freight companies define them. In order to set up the freight shipment as quickly as possible please provide us with a business name, address, phone number and whether you have access to a loading dock or forklift to remove the skid from the delivery truck. If you will need the assistance of a lift gate truck to lower the item to the ground let us know. That is an additional charge. If you require the item shipped to a residence, it will be much more expensive. Thank you. Terms of Sale The below message applies ONLY to food items It is a part of a template. It appears on all of our listing, but It only applies to a small amount of items we have for sale. The sale of this item MAY be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Please purchase this item if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item. About Us We are located in Des Moines, Iowa and we have been selling on Ebay for over 20 years. Most of our items come direct from Universities and various Government agencies. These are trusted sources that we have worked with for many years. We carefully test and examine each item before listing it on Ebay. We pride ourselves in selling quality items with excellent customer service. This is reflected by our Ebay feedback score of 99.6% We ship all over the world. We appreciate your business. If you have any questions, please message us!! Contact Us We are located in Des Moines, Iowa. Feel free to contact us through Ebay messages. Pictures sell! Auctiva offers Free Image Hosting and Editing.300+ Listing Templates! Auctiva gets you noticed! The complete eBay Selling Solution.

Speed Calibration Test Tape for Cassette Deck or Walkman Content: 3000 Hz Sinus Signal @ 0dBLocation: Side One (first 15 min)Recording Deck: Akai GX-95 Tape length: C-90 Its require the digital multimeter that can measure frequency in Hzand connect wires to line out on your cassette deck.Otherwise, it could be done on PC with soft found online.For walkman make sure that volume set in full with Dolby Off. Please check the link for video on youtube: https://www.youtube.com/watch?v=MmULTnPY3Ws

GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).

GennLab Standard Alignment (calibration) Cassettes equivalent to Pioneer Calibration CassettesOne of the following cassettes can be ordered.GLPIC-301. Tape speed WOW & Flutter. -10dB at 3 kHz, Equivalent to Pioneer STD-301 cassettes.GLPIC-331 (GL-331). Multifrequency, 250 nWb/m at 333 Hz, 1590+120usec. 0dB 333Hz, -20dB 333Hz reference, 10kHz - 40Hz Freq. Response. Equivalent to Pioneer STD-331 cassettes.GLPIC-331A (GL-331A). Multifrequency, 250 nWb/m at 333 Hz, 3180+120usec. 0dB 333Hz, -20dB 333Hz reference, 14kHz - 40Hz Freq. Response. Equivalent to Pioneer STD-331A cassettes.GLPIC-334 (GL-334). Multifrequency, 250 nWb/m at 333 Hz, 1590+120usec. 0dB 333Hz, -10dB 10kHz, -20dB 333Hz reference, 6.3kHz Freq. Response. Equivalent to Pioneer STD-334 cassettes.GLPIC-341 (GL-341). Multifrequency, 250 nWb/m at 333 Hz, 1590+120usec. 0dB 333Hz, -20dB 10kHz, 333Hz reference, 6.3kHz Freq. Response. Equivalent to Pioneer STD-341 cassettes.GLPIC-341A (GL-341A). Multifrequency, 250 nWb/m at 333 Hz, 3180+120usec. 0dB 333Hz, -20dB 10kHz, 333Hz reference, 6.3kHz Freq. Response. Equivalent to Pioneer STD-341A cassettes.GLPIC-331B (GL-331B). Multifrequency, 160 nWb/m 315 Hz, 3180+120usec. 0dB 315Hz, -20dB 6.3kHz 10kHz azimuth, 315Hz reference, 14kHz - 40Hz Freq. Response. Equivalent to Pioneer STD-331B cassettes.GLPIC-331E (GL-331E). Multifrequency, 250 nWb/m 315 Hz, 3180+120usec. 0dB 315Hz, -20dB 6.3kHz 10kHz azimuth, 315Hz reference, 14kHz - 40Hz Freq. Response. Equivalent to Pioneer STD-331E cassettes.

GennLab Standard Alignment Cassettes. LevelSuitable for Playback Output Level alignment of any Cassette Tape Deck. Only new 17u TDK, MAXELL or TEAC tape is used when recording. Each tape has a duration of 10 minutes, recorded at the BEGINNING of the Tape from 00 min 30 sec to 10min 30 sec Level fluctuation less than +/-0.1 dB measured. Typically +/-0.06 dB Frequency fluctuation +/-0.01% (measured)To order a Dolby Level Cassette (A-BEX TCC-130) choose the option 1-7/8 ips 200 nWb/m, 400 Hz Dolby. Set Playback Output Level of each channel to match with Dolby marks on the VU-meters scale.This Cassette can be used for decks with DD Dolby marks on VU-meters (not suitable for Nakamichi decks).To order 400 Hz Level Tape for Nakamichi tape decks alignment choose the 1-7/8 ips Nakamichi Level, 400 Hz, A or Boption. Follow the procedures of the Nakamichi Service Manuals for those decks. These Cassettes are equivalent to Nakamichi DA09005A or B Test Cassettes.To order DIN Level Cassette choose the 1-7/8 ips 250 nWb/m 315 Hz 0dB DIN/IEC option. Suitable for Playback Output Level alignment of European and Tascam122mk3, 112Rmk2, 112mk2, 134B SYNCASET Cassette Tape Decks. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale.To order Tascam 122mk3 Standard Level Cassette choose the 1-7/8 ips Tascam 122mk3 0 VU option. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale.To order DIN 3-3/4 ips Level Cassette choose the 3-3/4 ips 250 nWb/m, 315 Hz DIN option.To order Pioneer Standard Level Cassette equivalent to the Level portion of Pioneer STD-331A/341A cassettes choose the 1-7/8 ips Pioneer Level 0 dB 333 Hz option. Suitable for Playback Output Level alignment of Pioneer (ST-F1250 etc.), Philips and SONY (European version) Cassette Tape Decks. Set Playback Output Level of each channel to match with 0 dB marks on the VU-meters scale. The set of this cassette plus Frequency Response Cassettes (333 Hz, 6.3 kHz, 10 kHz) is equivalent to Pioneer STD-341A cassettes.The set of this cassette plus Frequency Response Cassettes (333 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz) is equivalent to Pioneer STD-331A cassettes.To order Pioneer Standard Level Cassette equivalent to the Level portion of Pioneer STD-331B cassettes choose the 1-7/8 ips Pioneer Level 0 dB 315 Hz option. The set of this cassette plus Frequency Response Cassettes (40Hz, 63Hz, 125Hz, 250Hz, 315Hz, 500Hz, 1kHz, 2kHz, 4kHz 6.3 kHz, 8 kHz, 10kHz, 12.5kHz, 14kHz) is equivalent to Pioneer STD-331B cassettes.To order Tandberg Standard Level Cassette choose the Tandberg Cass. No.24, 250 nWb/m, 1000 Hz option. Suitable for Playback Output Level alignment of Tandberg cassette decks (TCD-910 etc.). This cassette is equivalent to Tandberg test cassette No.24 cassettes.To order a 15 ips Duplicator Standard Level Cassette choose the 15 ips Duplicator 160 nWb/m, 315 Hz DIN/IEC or 15 ips Duplicator 250 nWb/m, 333 Hz DIN/IEC from the Cassette Fluxivity Level option. Suitable for Playback Output Level alignment of cassette duplicators (OTARI DP-4050C2 etc.).One tone is recorded on each Cassette at the level corresponding to the Equalization curve and Reference Fluxivity.Please specify Cassette Speed, Level and Frequency.

GennLab Standard Alignment Cassettes.1 kHz, 3 kHz or 3.15 kHz Speed, Wof & Flutter.Please note. These cassettes are 3 kHz FREQUENCY cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for tape speed alignment of Cassette Tape Decks using Frequency Counter and W&F Meter.Only new TDK, MAXELL or TEAC 17u tape is used when recording.Time Constant: 3180us + 120us. Frequency: 1 kHz, 3 kHz or 3.15 kHz. Frequency fluctuation: +/-0.01% measured.Level: -10 dB re 0 dB 160 nWb/m @ 400 Hz for 3 kHz NAB tapes (Nakamichi DA09006A); -10 dB re 0 dB 250 nWb/m @ 315 Hz for 3,15 kHz DIN tapes; -10 dB re 0 dB 250 nWb/m @ 315 Hz for Tandberg 1 kHz DIN tapes. Duration: 5 min recorded at the BEGINNING of the Tape from 00 min 30 sec to 5min 30 sec;The residual W&F of the tape itself is 0.022 % RMS WEIGHTED measured to NAB / JIB C5551 Standards using for playback the same MX5050 Reel to Reel tape recorder the tape has been recorded on. A few measurements of the same tape portion have been done using a Neutrik A2 analizer. The results from 0.008% to 0.036% averaged to 0.022%. A cassette reproduced using our Nakamichi Dragon showed 0.014% to 0.057% averaged to 0.035%. Cassette Tape Deck speed alignmentThe tape frequency reading gradually drops slowly towards the end of 5 min. portion of the tape. This is normal, and it depends on the deck mechanism condition. To check your deck mechanism condition do following: 1. Read the deck Speed specifications (1-7/8 +/- ….%). 2. Calculate +/-….Hz tolerance from 1000, 3000 or 3150 Hz. 3. Playback ANY tape for 2 minutes to warm up motors and mechanism. 4. Playback the 1, 3 or 3.15 kHz Speed tape from the beginning of the tape for 1 min. Note the frequency in Hz at the end of the 1 min. portion of the tape. Say this is the Frequency at the Beginning of the Speed tape. 5. Stop the deck. Flip over the cassette. The 1 min. portion becomes the last minute of the tape. 6. Playback the tape from that 1 min. position and note the frequency in Hz at the beginning of that 1 min. portion of the tape. Say this is the Frequency at the End of the Speed tape. 7. Check if the frequency difference in Hz is within the decks Speed specifications tolerance. If not, a number of things could be the reason: too high back tension of the supply reel (dirty friction felt or misalignment), not enough friction in the capstan-pinch roller pair (dirty or dried out pinch roller), dried out capstan bearings lubrication, dried out and loose capstan belt, dried out motor bearings lubrication etc. 8. Finally, calculate the Average Frequency. F average = (F beginning + F end)/2. Calculate the Average Frequency Deviation from the Tape Nominal Frequency. Deviation = F average - F nominal. Adjust speed of the deck to obtain minimum possible Deviation.3kHz or 3.15kHz 1-7/8 4.76 cm/sec Speed Cassette is suitable for tape speed alignment of any Normal-speed Cassette Tape Deck (Nakamichi DA09006A).3kHz or 3.15kHz 15/16 ips 2.38 cm/sec Speed Cassette is suitable for tape speed alignment of any Low-speed Cassette Tape Deck (e.g. Nakamichi 680ZX).3 kHz or 3.15kHz 3-3/4 ips 9.53 cm/sec Speed Cassette is suitable for tape speed alignment of any Hi-speed Cassette Tape Deck.Tandberg Cass. No.21, 1000 Hz, 1-7/8 ips - 4.7625 cm/sec Speed Cassette is suitable for tape speed alignment of Tandberg cassette tape decks(TCD-910 etc.)To order a 7-1/2 ips or 15 ips Duplicator Speed Standard Calibration Cassette choose the Duplicator option. Suitable for Speed alignment of cassette duplicators (Otari DP-4050C2 etc.).Please specify Cassette Speed and Frequency.

GennLab Standard Alignment Cassettes Frequency Response (FR) Please note. These cassettes are LEVEL cassettes (not 90 degrees ANGLE cassettes). They CAN NOT be used for final Azimuth adjustment.To perform playback frequency response test, set Playback Head Azimuth for maximum output for EACH Frequency Response cassette INDIVIDUALLY.On completion of playback frequency response test, finally set Playback Head Azimuth for maximum output and minimum difference in phase between channels using AZIMUTH cassettes. Suitable for Playback Frequency Response adjustment of any Cassette Tape Deck using AC millivoltmeter.Recorded -20dB below Reference Fluxiviti Level. See the options below.Level fluctuation: less than +/-0.2 dB measured. Typically +/-0.1 dBFrequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 30 min (NOT suitable for final azimuth adjustments).Duration of each Tape 10 min recorded at the BEGINNING of the Tape from 00 min 30 sec to 10min 30 sec. Please specify Cassette Equalization Standard from the options below: Type I Ferro NAB 160nWb/m. Time Constants: 3180us + 120us,Type II CrO NAB 160nWb/m. Time Constants: 3180us + 70u,Nakamichi SX. Time Constants: 3180us + 70us,Type I Ferro NAB 200nWb/m. Time Constants: 3180us + 120us,Type II CrO NAB 200nWb/m. Time Constants: 3180us + 70us,Pioneer Type I Ferro. Time Constants: 3180us+120us, -20 dB,Pioneer Typ II CrO2, Time Constants: 3180us+70us -20 dB,SONY Type I Ferro. Time Constants: 3180+120us, -20dB re 315Hz Level cassette,SONY Type I Ferro. Time Constants: 3180+120us, -20dB re 333Hz Level cassette,Type II CrO2 DIN 250nWb/m -20dB 3180us + 70us,Tascam 122mk3 Fr. Resp. Time Constants: 3180us + 120us,3-3/4 ips FR DIN 250 nWb/m -10 dB Time Constants: 3180+50us. Following frequencies can be recorded:20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz,250 Hz, 315 Hz (DIN Reference), 333 Hz (Philips Reference), 400 Hz (Nakamichi reference), 500 Hz, 630 Hz, 700 Hz,800 Hz, 1 kHz, 1.25 kHz,1.6 kHz, 2 kHz, 2.5 kHz,3 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 7.5 kHz, 8 kHz, 10 kHz, 12 kHz, 12.5 kHz, 14 kHz, 15 kHz, 16 kHz, 18 kHz, 20 kHzPleas specify Cassette Frequency from the options above.

Sony TC-WA7ESA dual cassette deck. Auto reverse. Auto calibration. For Repair. Powers up. Wheels not turning. Makes an engaging noise. Very clean deck. For repair.

***INTERNATIONAL BUYERS TO CHECK FIRST VAT/CUSTOMS/SHIPPING QUOTES VIA DM BEFORE PURCHASE!*** TYPE I Normal Position - Calibration Cassette Tape for Audio Test Speed BIAS Wow Flutter Azimuth alignment and adjustment for Stereo Cassette Deck, Walkman, Answering Machine, Boombox, Cassette Player - IEC I/TYPE I Normal Position Cassette Tape NB!**Added Worldwide Shipping+Insurance Included** NB!! *** Due to the development of the latest events and with the constant aim for us to provide you with the best services, all of our products and/or their packages (where available) are being cleaned with AntiBacterial 99,9% + Isopropanol/Isopropyl Alchohol 99.9% cleaning fluids before dispatch. As always - Thank you for your business!*** Product Description for Cassette Tapes - IEC I/TYPE I NORMAL POSITION Cassette Tape:: Calibration Cassette Tape for Audio Speed BIAS Wow Flutter Azimuth Test 23 tones. This is a professional product by PAVZO LTD, London, specially crafted to the highest industry standards for test recording frequencies. A calibration Cassette Tape for Flutter, wow, Speed, Setting the recording BIAS level, Head Height Alignment and Azimuth. Recorded on IEC II/TYPE II CHROME TYPE Position, OR IEC I/TYPE I NORMAL TYPE cassette tapes. All tones are recorded on our four AKAI GX-95 MK II and two Nakamichi Direct Drive Quartz Lock Cassette Deck - all fully serviced on every 30 recording hours. This is the ad list for the NORMAL TYPE I Cassette The cassettes we use arebrand new sealed cassette tapes OR single-time-prerecorded factory tapes, for best sound recording quality. The original files are digitally generated frequency tones with a short voice description before each of them - 1m:30s long with 5sec gaps in between for an easy auto track search recognition. We fully analyse our tapes using oscilloscope, PC Software and digitally generate the frequencies using a waveform software generator to achieve the highest-quality. Every tone has a duration of 1 minute and 30 seconds each. For your convenience, there is a short audio description before each generated tone. This will also help the devices, equipped with automatic search to find the pauses between the tones. - Package includes 1kHz, 3kHz, 8kHz, 10kHz, 315Hz, 440Hz, 6.3kHz, 12.5kHz and many more assorted tones. Please Direct Message on eBay to get the full list included. Should you require a specific generated tone on a Calibration Cassette Tape, Calibration CD or a Calibration MiniDisc or as a Download ZIP File, please use the Direct Message on eBay to place your request. (offer for the cassette tape only) If youre looking for a Chrome/Type II version of the Calibration Cassette, please have a look at the other eBay listing here: https://tinyurl.com/yy3329sb Explanatory video link with calibration techniques to follow shortly. ***NB! PRICE IS FOR A SINGLE PRODUCT OF YOUR CHOICE*** (offer for the cassette tape only) ***VERY IMPORTANT T&C and INFORMATION FOR BUYERS!*** - **INTERNATIONAL BUYERS** - THERE ARE NEW SHIPPING AND CUSTOMS T&C AND REGULATIONS AFTER 01 JAN 2021 - PLEASE DO YOUR RESEARCH BEFORE PURCHASE! As always we will continue to provide our best services and shipping/insurance options for our customers. Should you have any questions, please contact us and we will help. - It is the Buyers responsibility to check compatibility before purchase. - Shipping options (when agreed) will be at extra charge for secure boxing + full insurance of the total amount of the purchased item/s - Before purchase, read in full the product(s) description and go through all product(s) pictures and video links provided (where available) and attached to this ad. Should you have any questions, please ask before purhasing our product(s) by PM and your questions will be answered as soon as possible.- Due to the high amount of scam/fraud accounts and fake refund claims, ALL valuable products are security tagged with unique hologram serial numbers/IMEI/QR or other identification code(s). Before shipping ALL Security/Product Codes (internal and/or external) will recorded to prevent fraudulent actions and false claims.- Should a parcel gets delivered to a buyer in a condition NOT as described and pictured/filmed or any other condition NOT already discussed or shown in our communication, please DO NOT! accept the parcel and return it to us immediately. Let us know about the issue and we will have it sorted out as soon as possible. - Any attempts to break/cut/change/remove/counterfeit/falsify/forge or tamper our hologram security tags (internal and/or external) or repair our products without our knowledge will be reported to eBay immediately. - Pictures or videos (where available) of the product and packaging before posting will be provided in a separate email to the buyers, right after purchase, in order to prevent any confusion on both sides about the product(s)condition. Pictures/videos of internal/external security tags and their position/condition will be shot and kept to our listing database as a proof before shipping. - NO WARRANTY and NO RETURNS unless explicitly mentioned in the ad - All listed products will be inspected and tested - unless the brand new and sealed condition ones. - When sold (AS USED or SELLER REFURBISHED) the listed items may have aging wear signs and scratches or some signs of cosmetic wear due to aging. - Wen sold as (BRAND NEW/SEALED) products may have warranty terms and conditions carried by the original maker/producer/factory. PAVZO LTD, London will not take any responsibilities for any type of product faults. We can only secure our BRAND NEW/SEALED products using the safe postage packaging and fully insuring the parcels. Warranty T&C are with the original product maker/producer/factory.- All listed ads in this account come from a smoke & pets free environment.- This account is a Trusted Seller - we strongly encourage positive communication and we always work very hard towards 100% client satisfaction. - Total average weight with full packaging may vary (hence there is no way to give fixed shipping quotes and insurance quotes). If shipment option is available or requested, all the products listed, will be posted in protected, bubble-wrap foil and well secured in the cardboard box in the best possible way. - Shipping ONLY to residential or business PayPal registered addresses with signed for option. - When the option available or agreed, Buyer can arrange prepaid delivery (signed for+fully insured+tracked service only) with UPS/FedEx/Royal Mail services. ***NB*** Hermes Courier WILL NOT BE USED for any type of shipping due to their massive problematic terrible delivery services, drivers stealing packages cases and insurance payment problems and issues!! Happy Bidding and feel free to have a look at the other products we have listed for sale!

***INTERNATIONAL BUYERS TO CHECK FIRST VAT/CUSTOMS/SHIPPING QUOTES VIA DM BEFORE PURCHASE!*** TYPE II/Clear Chrome Position - Double Calibration Cassette Tape Pack for Audio Test Speed BIAS Wow Flutter Azimuth alignment and adjustment for Stereo Cassette Deck, Walkman, Answering Machine, Boombox, Cassette Player - IEC II/TYPE II CLEAR CHROME TYPE Position Cassette Tape NB!! *** Due to the development of the latest events and with the constant aim for us to provide you with the best services, all of our products and/or their packages (where available) are being cleaned with AntiBacterial 99,9% + Isopropanol/Isopropyl Alchohol 99.9% cleaning fluids before dispatch. As always - Thank you for your business!*** ***WE NOW SHIP WORLDWIDE!!** Please ask for International Shipping Quotes. Product Description for Cassette Tapes: - IECII/TYPE II Clear Chrome Type Position Double Cassette Tape Pack - 2X PAVZO Calibration Cassette Tapes for Audio Speed BIAS Wow Flutter Azimuth Test -These calibration test cassette tapes can help you measure and correct the following: * Left & Right Audio Channel * Playback Levels * Speed * Wow * Flutter * Dolby Level * Crosstalk Hello to our buyers! We are happy to present today our latest product - The Double Callibration TYPEII Clear Chrome Type Cassette Pack from PAVZO LTD, London. Recently we acquired a massive quantity of double cassette tapes directly from BBC and their collection (both chrome and normal type cassette tapes) This is the ad list for the Clear CHROME TYPEII Double Calibration Cassette Pack ***Please NOTE - due to stacking of the double cassette cases (crystal/transparent plastic cases) some may have small scratches/cracks on the outside/inside that doesnt affect the cassettes or their recording quality in any way. We will do our best to handpick the best ones before shipping. This is the ad list for the Clear CHROME TYPEII Double Cassette Pack This is a professional product by PAVZO LTD, London, specially crafted to the highest industry standards for test recording frequencies. A calibration Cassette Tape for Flutter, wow, Speed, Setting the recording BIAS level, Head Height Alignment and Azimuth. Recorded on IEC II/TYPE II Clear CHROME TYPE Position, OR IEC I/TYPE I NORMAL TYPE cassette tapes. All tones are recorded on AKAI GX-95 MK II and our own Nakamichi Direct Drive Quartz Lock Cassette Deck - both fully serviced on every 30 recording hours. This is the ad list for the Clear CHROME TYPEII Double Cassette Pack The cassettes we use arebrand new sealed cassette tapes OR single-time-prerecorded factory tapes, for best sound recording quality. The original files are digitally generated frequency tones with a short voice description before each of them - 1m:30s long with 5sec gaps in between for an easy auto track search recognition. We fully analyse our tapes using oscilloscope, PC Software and digitally generate the frequencies using a waveform software generator to achieve the highest-quality. Every tone has a duration of 1 minute and 30 seconds each. For your convenience, there is a short audio description before each generated tone and its properties. This will also help the devices, equipped with automatic search to find the pauses between the tones. - Package includes 1kHz, 3kHz, 8kHz, 10kHz, 315Hz, 440Hz, 6.3kHz, 12.5kHz and many more assorted tones. Please Direct Message on eBay to get the full list included. Should you require a specific generated tone on a Calibration Cassette Tape, Calibration CD or a Calibration MiniDisc or as a Download ZIP File, please use the Direct Message on eBay to place your request. (offer for the cassette tape pack only) ***NB! PRICE IS FOR A SINGLE PRODUCT OF YOUR CHOICE*** (offer for the cassette tape pack only) ***VERY IMPORTANT T&C and INFORMATION FOR BUYERS!*** - **INTERNATIONAL BUYERS** - THERE ARE NEW SHIPPING AND CUSTOMS TAXES, T&C AND REGULATIONS AFTER 01 JAN 2021 - PLEASE DO YOUR RESEARCH BEFORE PURCHASE! As always we will continue to provide our best services and shipping/insurance options for our customers. Should you have any questions, please contact us and we will help. - It is the Buyers responsibility to check compatibility before purchase. - Shipping options (when agreed) will be at extra charge for secure boxing + full insurance of the total amount of the purchased item/s - Before purchase, read in full the product(s) description and go through all product(s) pictures and video links provided (where available) and attached to this ad. Should you have any questions, please ask before purhasing our product(s) by PM and your questions will be answered as soon as possible.- Due to the high amount of scam/fraud accounts and fake refund claims, ALL valuable products are security tagged with unique hologram serial numbers/IMEI/QR or other identification code(s). Before shipping ALL Security/Product Codes (internal and/or external) will recorded to prevent fraudulent actions and false claims.- Should a parcel gets delivered to a buyer in a condition NOT as described and pictured/filmed or any other condition NOT already discussed or shown in our communication, please DO NOT! accept the parcel and return it to us immediately. Let us know about the issue and we will have it sorted out as soon as possible. - Any attempts to break/cut/change/remove/counterfeit/falsify/forge or tamper our hologram security tags (internal and/or external) or repair our products without our knowledge will be reported to eBay immediately. - Pictures or videos (where available) of the product and packaging before posting will be provided in a separate email to the buyers, right after purchase, in order to prevent any confusion on both sides about the product(s)condition. Pictures/videos of internal/external security tags and their position/condition will be shot and kept to our listing database as a proof before shipping. - NO WARRANTY and NO RETURNS unless explicitly mentioned in the ad - All listed products will be inspected and tested - unless the brand new and sealed condition ones. - When sold (AS USED or SELLER REFURBISHED) the listed items may have aging wear signs and scratches or some signs of cosmetic wear due to aging. - Wen sold as (BRAND NEW/SEALED) products may have warranty terms and conditions carried by the original maker/producer/factory. PAVZO LTD, London will not take any responsibilities for any type of product faults. We can only secure our BRAND NEW/SEALED products using the safe postage packaging and fully insuring the parcels. Warranty T&C are with the original product maker/producer/factory.- All listed ads in this account come from a smoke & pets free environment.- This account is a Trusted Seller - we strongly encourage positive communication and we always work very hard towards 100% client satisfaction. - Total average weight with full packaging may vary (hence there is no way to give fixed shipping quotes and insurance quotes). If shipment option is available or requested, all the products listed, will be posted in protected, bubble-wrap foil and well secured in the cardboard box in the best possible way. - Shipping ONLY to residential or business PayPal registered addresses with signed for option. - When the option available or agreed, Buyer can arrange prepaid delivery (signed for+fully insured+tracked service only) with UPS/FedEx/Royal Mail services. ***NB*** Hermes Courier WILL NOT BE USED for any type of shipping due to their massive problematic terrible delivery services, drivers stealing packages cases and insurance payment problems and issues!! Happy Bidding and feel free to have a look at the other products we have listed for sale!

New,unopened cassette speed calibration tape.440hz and 3150 hz for flutter and deck speed.