Especially suited to Naim HiFi equipment, this is a high spec 5-Pin DIN to 5-Pin DIN interconnect by Chord with locking terminals. In good condition - no cuts, nicks, or twists to the cable and terminals are robust with all pins intact and straight. [eBay code: JK 15 RT]

Chord Cobra 3 5-Pin Din Naim - 2 RCA to Naim. Cable clear out, unused for a while now as no longer own any Naim gear.Welcome to collect or will post.

Welcome to bid for The Chord Company Cobra Plus to mini- XLR Terminated Balanced Interconnect. This is a very high quality interconnect designed especially for use with Vynl phonostage from Musical Fidelity . It is built with the latest incarnation of the classic Cobra audio cable - the CobraPlus version, one of the very best cables dedicated to balanced connection system. Cable made with the best technology, double shielded, one of screening layers is high density plated braid and another is aluminized mylar to protect against high frequency interference. Cables are terminated with the Chord marked gold plated RCA connectors and mini-XLR connectror with gold contacts to connect to balanced input of Musical Fidelity Vynl phonostage TECHNICAL PARAMETERS: INPUT/OUTPUT: mini XLR gold plated and 2c RCA connectors CABLE LENGTH: 90 cm (94 cm tip to tip)Delivery and possible return. Shipping cost of £4.85 quoted is related to UK mainland destinations only.Attention of International bidders: we will be pleased to ship worldwide. Shipping cost of £14 quoted is initial estimation for EU only.we will be pleased to ship worldwide. Overseas delivery could cost from £19 (USA, China) to £24 (Australia, South America) We charge an actual minimal for international shipment, please, ask for quotation before bidding to be sure. We combine shipments, just ask for lower postage cost if bid for more than one item. Please, note that we ship within 4-5 working days after the payment is cleared. Please, allow few extra days for delivery even if you are in UK, overseas delivery can take up to 10-12 working days, sorry about inconvenience Item is fully tested and return is accepted within 2 week after delivery and exclusively in shape as it was shipped, i.e. perfect working condition. In this case 100% of auction price and shipment cost will be refunded. Return of nonworking, damaged or scratched item is not accepted and will be not refunded. Return shipment cost is on Buyer’s side.

Normal 0 false false false RU X-NONE X-NONE Normal 0 false false false RU X-NONE X-NONE Welcome to bid for Chord Co. Cobra Interconnect for Naim NAP amplifiers The interconnect is for connection of any audio source, like CD, DAC or preamplifier to DIN terminated input of NAIM power amplifiers:NAP 90, NAP 100, NAP 140, NAP 150X, NAP 180, NAP 200For this configuration the interconnect provides highest quality of sound reproductionOne cable is used to transfer signals for both audio channels as it is made with the first (and the best audio quality) edition of Cobra - black 4 core shielded cable. This feature provides lowest noise and very accurate balance in between stereo channels.If you are in doubt or look for a similar cable for your particular setup please send a message with your question to be sure.The interconnect is 100 cm long.

Especially suited to Naim HiFi equipment, this is a high spec 5-Pin DIN to 5-Pin DIN interconnect by Chord with locking terminals. In good condition - no cuts, nicks, or twists to the cable and terminals are robust with all pins intact and straight. [eBay code: JK 15 RT]

Chord Cobra 3 5-Pin Din Naim - 2 RCA to Naim. Cable clear out, unused for a while now as no longer own any Naim gear.Welcome to collect or will post.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. This is for 1x1m cable will also work with a naim 250. You will need a pair of these if you wish to use it with NAP 135 amps assuming you got a hicap or supercap.

Naim SNAIC 4 Pin to 4 Pin Din 1m Chord Cobra for Pre 2 Power amplifier - NAP The way to set this up is that you need to have your own independent power supply to your pre amp. Can be use with DAC 1 to Power amp. Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. 2x 1m cables will also work with a pair of 135 amps assuming you got a hicap or supercar.

Cobra 29 LTD Classic CB Car Truck Radio Used No Chords. Bid with confidence

Chord Company Cobra 3 RCA Phono Interconnect cable - 2m Pair. All in excellent condition and full working order. Will be very well packed and promptly sent via tracked delivery Description: The sweet and even tonality of the Chord Cobra 3 ensures a sound that never becomes bright or tiring to listen to. Great dynamics and high levels of detail combine with the improved shield system to produce an involving and enjoyable musical experience.Cobra 3 cables consist of two sets of stranded oxygen free copper conductors with a polyethylene insulator and overall lapped shield around both sets. The two sets of conductors are twisted together. The reason for this is that twisting the two conductors helps to reduce interference. One set of conductors is used to carry the signal and the other set is used to make the return signal path. This means that the Cobra cable is of a balanced design (signal and return conductors are identical). Cobra 3 uses cotton conductor spacers to minimise vibration-generated noise and the outer jacket is chosen because it provides a high degree of mechanical damping. This helps to minimise any handling noise. The colour of the outer jacket is British Racing Green.The Chord Cobra 3 is a very versatile cable and can be fitted with RCA plugs, Dins, BNC plugs and XLR 3 pin connectors.As with Chrysalis, the Chord Cobra 3 is a very compatible cable that suits most equipment. It produces a sound that is dynamic, detailed and easy to listen to. Unusually for an interconnect at this price point the Chord Cobra 3 places voices and instruments in a surprisingly solid and believable sound stage. It will work happily in music and audio/video systems, and is particularly good with slightly bright CD players. In fact Cobra 3 will work well in just about every application and is rapidly becoming regarded as something of a bargain.The Chord Cobra 3 has a wider bandwidth than Chrysalis. This translates as lower bass and higher treble. At the same time, whilst allowing more detail, the geometry and shielding of the cable combined with higher quality copper means that the information is presented in a manner that is obviously more detailed than the Chrysalis but also has a pleasing naturalness. A lot of cables that are described as natural achieve this at the expense of detail, but the Cobra 3 manages quite a rare trick of combining naturalness and detail.Dual balanced twisted pair oxygen free copper conductorsHigh coverage lapped shield systemGold-plated RCA plugsFoamed polyethylene dielectricCable spacers designed to minimise vibration generated noise

Naim SNAIC 4 Pin to 4 Pin Din 1m Chord Cobra for Pre 2 Power amplifier - NAP The way to set this up is that you need to have your own independent power supply to your pre amp. Can be use with DAC 1 to Power amp. Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. 2x 1m cables will also work with a pair of 135 amps assuming you got a hicap or supercar.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. This is for 1x1m cable will also work with a naim 250. You will need a pair of these if you wish to use it with NAP 135 amps assuming you got a hicap or supercap.

Welcome to bid for The Chord Company Cobra Plus to mini- XLR Terminated Balanced Interconnect. This is a very high quality interconnect designed especially for use with Vynl phonostage from Musical Fidelity . It is built with the latest incarnation of the classic Cobra audio cable - the CobraPlus version, one of the very best cables dedicated to balanced connection system. Cable made with the best technology, double shielded, one of screening layers is high density plated braid and another is aluminized mylar to protect against high frequency interference. Cables are terminated with the Chord marked gold plated RCA connectors and mini-XLR connectror with gold contacts to connect to balanced input of Musical Fidelity Vynl phonostage TECHNICAL PARAMETERS: INPUT/OUTPUT: mini XLR gold plated and 2c RCA connectors CABLE LENGTH: 90 cm (94 cm tip to tip)Delivery and possible return. Shipping cost of £4.85 quoted is related to UK mainland destinations only.Attention of International bidders: we will be pleased to ship worldwide. Shipping cost of £14 quoted is initial estimation for EU only.we will be pleased to ship worldwide. Overseas delivery could cost from £19 (USA, China) to £24 (Australia, South America) We charge an actual minimal for international shipment, please, ask for quotation before bidding to be sure. We combine shipments, just ask for lower postage cost if bid for more than one item. Please, note that we ship within 4-5 working days after the payment is cleared. Please, allow few extra days for delivery even if you are in UK, overseas delivery can take up to 10-12 working days, sorry about inconvenience Item is fully tested and return is accepted within 2 week after delivery and exclusively in shape as it was shipped, i.e. perfect working condition. In this case 100% of auction price and shipment cost will be refunded. Return of nonworking, damaged or scratched item is not accepted and will be not refunded. Return shipment cost is on Buyer’s side.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. This is for 1x1m cable will also work with a naim 250. You will need a pair of these if you wish to use it with NAP 135 amps assuming you got a hicap or supercap.

Naim SNAIC 4 Pin to 4 Pin Din 1m Chord Cobra for Pre 2 Power amplifier - NAP The way to set this up is that you need to have your own independent power supply to your pre amp. Can be use with DAC 1 to Power amp. Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. 2x 1m cables will also work with a pair of 135 amps assuming you got a hicap or supercar.

Naim snaic cable SNAXO 24 to NAP250 Custom 2x 4pin DIN to XLR Active Crossover Basically this will convert you snaxo so that the channels can be split horizonally instead of vertically without having to mess about with getting perfect matching amps. With the cable method you can always revert back to left and right. Picture is for illustration only but I will use chord cables. I can make the snaxo 4 pins to XLR (NAP 250) or 4 pins (NAP 180). Naims intention are to have 2x 250s equal amps but they are not dual mono constructed we all know no 2 amps are the same which is why we want to split them vertically to get it working symmetrically otherwise you an uneven left and right sounding system. For a fully active system that cost nearly 10k that is a major correction.Typical setup.Linn LP12Naim NAC 52 preampNaim SupercapNaim Snaxo 24 <----Naim Hicap2x Naim 250 NAPNaim SBL SpeakersI can also make it so that you can use the NAP 250 for the lower end and the NAP180 for the top end. Happy to post or collection is available.

Naim snaic CHORD COBRA 1M. 4 PIN DIN 2 X RCA phono pre AMP or Hicap to AMP NAIM HAS THE BEST PRE AMP TO MAKE THE MUSIC MORE INVOLVING BUT THERE ARE BETTER ALTERNATIVE POWER AMPS OUT THERE SUCH AS BRYSTON. THIS CABLE ALLOWS YOUR TO USE THE OUT PUT FROM THE PREAMP OR HICAP SUPERCAP (4 pin) AND CONNECT IT VIA PHONO CABLE TO ANY POWER AMP. YOU CAN USE THE NAIM 52 80 72 ETC Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Chord Cobra 3 5 Pin Din - 2 RCA. This cable is in excellent condition and has been refurbished to a high standard by myself. I have been repairing and re-terminating cables since I first got involved with hifi around 2004. Joints have been soldered using WBT 4% Silver solder for improved quality. 5 Pin din - 2 RCA Upgraded Silver Vee 3 plugs New 5 pin din connector 1m cable In excellent condition Fully working Comes in original wooden box Free UK delivery

Chord Company Cobra 2 Din For Naim. Locking din plugs at both ends. Ideal for linking a naim source to a pre amp. Will only post to uk

Chord Cobra 2 Locking Din for Naim separate channels version. This is the upgraded version which has separate channels for l/r and then joins at each locking din plug Locking din plugs at both ends. Ideal for linking a naim source to a pre amp.Will only post to uk