Beschreibung
Hello Ebay, Up for sale is a JBL Professional CBT 200LA-1 Column speakers-dinged up but works Did a simple test for audio out, they both work. Cross over function untested due to time restraints. Very dinged up, grills are dented, one emblem is gone, please look at pictures for condition. Stands or mounting brackets not included, just the speakers. DriversThirty-two 50 mm (2 in) Full-Range DriversFrequency Range (-10dB)80 Hz – 20 kHzFrequency Response (±3 dB)130 Hz – 18 kHz (narrow coverage, music mode setting)Coverage AngleConsists of two enclosures: Vertical: Switchable, Narrow Mode: 15°, Broad Mode: 30°, Asymmetrical Progressive-Gradient Mode: 22°. Consult spec sheet for detailsSensitivity - Narrow(speech mode): 95 dB (2 kHz – 5 kHz)(music mode): 92 dB (150 Hz – 18 kHz)Sensitivity - Broad(speech mode): 93 dB (2 kHz – 5 kHz)(music mode): 90 dB (150 Hz– 18 kHz)Sensitivity - Asymmetrical Progressive-Gradient Mode (on-axis)(speech mode): 94 dB (2 kHz – 5 kHz)(music mode): 91 dB (150 Hz – 18 kHz)Impedance8? per half (top and bottom) for 4 ohms total (in thru mode).Min-Z for system = 2.9?.HookupEnsure identical polarity of hookup – for proper functioning, the two loudspeaker modules (top and bottom) must be hooked up in same polarity. Parallel hookup at the two sets of back panel input terminals is recommended.Power Rating650W (2600W peak), 2 hrs400W (1600W peak) 100 hrsMax SPL - Narrow(speech mode): 123 dB cont ave (129 dB peak)(music mode): 120 dB cont ave (126 dB peak)Max SPL - Broad(speech mode): 121 dB cont ave (127 dB peak)(music mode): 118 dB cont ave (124 dB peak)Max SPL - Asymmetrical Progressive-Gradient Mode (on-axis)(speech mode): 122 dB cont ave (128 dB peak) (music mode): 119 dB cont ave (125 dB peak)70V/100V Transformer TypeSet individually per speaker module (top and bottom): 120W, 60W, 30W (15W at 70V only), and direct 8?, via switch. Total (with top & bottom set to same): 240W, 120W, 60W (30W at 70V only) and direct 4?. Max. insertion loss less than 1 dB at any tap.EnclosureFiberglass reinforced ABS cabinet, painted aluminum grilleConnectorsTwo (one for top half and one for bottom half), screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), or bare wire (up to 12 AWC/2.5 mm2)Outdoor CapabilityIP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.ColorBlack or White (-WH)ConfigurationTwo pieces (top and bottom half), each 100 cm tall, connected together via Coupler Plate. Top/bottom orientation of each piece must be observed.Insert Points28 M6 insert points on back panel (36 total with 8 center points being utilized by the Coupler Plate).MountingIncluded swivel (pan) / tilt wall bracket (must be mounted to threaded points on Coupler Plate) provides continuously variable ±80° left-right swivel aiming (at up to ±5° up/down tilt), continuously adjustable ±10° up/down tilt, as well as 5° fixed increment tilt angles to ±10°. Twenty-eight available threaded mounting points (M6 diameter x M1 thread pitch x 17 mm deep) located on back panel. Threaded mounting points can be utilized for suspension. Compatible with OmniMount 30.0 bracketsDimensions (H x W x D)2000 x 98.5 x 153 mm (78.8 x 3.8 x 6.0 in)Net Weight14.6 kg (33 lb)Included AccessoriesSwivel (pan) / tilt wall bracket, Coupler plateOptional AccessoriesMTC-PC2 terminal panel cover MTC-CBT-FM1 flush-mount low-profile wall-mount bracket (2 pieces required) MTC-CBT-SMB1 stand-mount bracket for use with 35 mm speaker stands (heavy duty stand required)
Livesuche