Dual 505-4 Audiophile Concept Turntable Low Mass Tonearm and Carbon fibre Headshell in excellent Working Order, what you see in the photos is what you get great for a home build diy project or to rebuild your existing arm cut out from its metal chassis, removed from a working 505-4 deckthe arm is in great working condition with silky smooth bearings, anti skate in perfect working order, with full wiring continuity,

Early version of Clearaudios well-regarded Concept turntable. Very nice condition; just a few minor flaws. A few features and specs: Decoupled DC motorVerify tonearmSpeeds: 33, 45 & 78 rpmBearing: polished, tempered-steel shaft in polished-bronze sintered bushing and mirror-polished Teflon thrust pad Cartridge not included. Serial No. 0531081 Will ship in original box and packing materials. Important Note on Shipping:eBay estimates of shipping costs are not accurate and do not include insurance or adult signature requirement. Please contact us for a more accurate quote. No shipping to Vietnam, China or Hong Kong. Please do not submit payment until you have received an invoice from us with accurate shipping costs. We reserve the right to hold the item or cancel the transaction if actual shipping costs are not paid.

Clearaudio Concept Silver/Black Turntable With Benz Micro MC Cartridge. Turntable with upgrades. Has factory upgraded motor/PCB board with Benz Micro Gold Moving Coil phono cartridge. Retails for 2,200 with MM cartridge.

Clearaudio Concept Wood Turntable With upgraded Carbon Satisfy Tonearm & high end concept MC cart. Includes everything you need apart from a phono stage. Excellent condition- see photos. View all photos closely. Any questions please send message. Upgraded Clearaudio Concept with wood plinth, upgraded tonearm (satisfy Carbon) and high end Concept MC cartridge. I purchased new and this has about 150 hours on it (estimated). Edit: this has a Q-UP tonearm lifter installed too. Only selling as I now have too many turntables???? Comes with original packing and box. I will double box when shipping

DUAL CS 505-3 Audiophile Concept Turntable with Ortofon DN 185E Spares or Repair. This otherwise excellent turntable stopped working a few years ago. The turntable wouldnt spin when the arm was lifted. Well it would after several/many tries and with some help by rotating the platter with my finger. This maybe an easy fix for someone who knows what theyre doing....or it might not be. Comes with the original Operating Instructions and Audiophile Concept leaflet. The lid has some scratches and has a fracture at one of the hinges but works, if a little looser than normal. Please examine the many photos to see for yourself. Ive tried to capture and list its known flaws but as the turntable, cartridge and stylus are sold for spares or repair there are no returns. Hopefully this will be a bargain for someone who can fix it.

Dual CS 505-4 Audiophile Concept Record Player Turntable Fitted with a Nagaoka MP-11 Boron Cartridge Speeds are 33 & 45rpm Overall this is in good cosmetic condition with the minimum of marksLid only has a few very light marks, No crack or gouges Turrntable is fully working and is fitted with a new belt. As I do not know how much the stylus has been used thefore I would recomend a new stylus for it Delivery to all UK destinations will be via Parcelforce Express 48 If you wish to collect this yourself then your welcome to do so

Dual CS 505-3 Turntable Hinges in excellent working order

Semi-automatic turntable with full-size suspended sub-chassis that effectively protects the drive mechanism of the unit from external vibrations. Sold with an Ortofon OMB 10 stylus/pickup.The record player was professionally serviced a few years ago and got new RCA, see the last picture. The lid has some scratches and a larger mark that looks like a white spot but cannot be washed off. See second to last picture. The 505 features a straight, tubular aluminum tonearm measuring just over 22cm in length, and a low-resonance, non-magnetic platter driven by a 16-pole synchronous dual motor and belt drive mechanism. The basic design and layout of the turntable has been tried and tested and it can still be bought new, in the form of the revised Dual CS 505-4. The CS 505-3s semi-automatic drive unit is easy to use. If you lift the tonearm into place over the record, the record will automatically start at the preset speed. The tonearm initially remains in the raised position, until you pull the lever to gently lower it. The record automatically stops spinning when the needle reaches the end of a record, and the tonearm automatically raises again. Specifications Concept: suspended chassis, belt-driveDrive unit: 16-pole synchronous motorEngine type: Dual SM 100-1Power consumption: 8 WattsPlatter: non-magnetic, 1.2 kgPlatter speeds: 33 1/2 and 45 RPMPitch control: +/- 6%Wow and Flutter: 0.06% (WRMS 0.035%)Rumble: 52 dB (75% weighted)Channel separation: > 25 dBChannel balance: < 2 dBArm length: 221 mmOffset angle: 24 30Tracking error: 0.15 “/cmFrequency range: 10-25,000 HzOutput: 4 mV / 5cms (1,000 Hz)Compliance: (h) 25 µm/mN; (v) 30 µm/mNCartridge weight: 2.5 gTotal capacitance: 160 pFDimensions: (W) 437mm; (D) 369mm; (H) 138mmWeight: 6kgCountry of manufacture: GermanyYear(s): 1987-1990 will ship world wide with tracking from Sweden. International shipping is correct.Will combine shipping. please ask any and all questions before bidding.

Dual 505-4 Audiophile Concept Turntable Hinges in excellent working order

Semi-automatic turntable with full-size suspended sub-chassis that effectively protects the drive mechanism of the unit from external vibrations. Sold with an Ortofon OMB 10 stylus/pickup.The record player was professionally serviced a few years ago and got new RCA, see the last picture. The lid has some scratches and a larger mark that looks like a white spot but cannot be washed off. See second to last picture. The 505 features a straight, tubular aluminum tonearm measuring just over 22cm in length, and a low-resonance, non-magnetic platter driven by a 16-pole synchronous dual motor and belt drive mechanism. The basic design and layout of the turntable has been tried and tested and it can still be bought new, in the form of the revised Dual CS 505-4. The CS 505-3s semi-automatic drive unit is easy to use. If you lift the tonearm into place over the record, the record will automatically start at the preset speed. The tonearm initially remains in the raised position, until you pull the lever to gently lower it. The record automatically stops spinning when the needle reaches the end of a record, and the tonearm automatically raises again. Specifications Concept: suspended chassis, belt-driveDrive unit: 16-pole synchronous motorEngine type: Dual SM 100-1Power consumption: 8 WattsPlatter: non-magnetic, 1.2 kgPlatter speeds: 33 1/2 and 45 RPMPitch control: +/- 6%Wow and Flutter: 0.06% (WRMS 0.035%)Rumble: 52 dB (75% weighted)Channel separation: > 25 dBChannel balance: < 2 dBArm length: 221 mmOffset angle: 24 30Tracking error: 0.15 “/cmFrequency range: 10-25,000 HzOutput: 4 mV / 5cms (1,000 Hz)Compliance: (h) 25 µm/mN; (v) 30 µm/mNCartridge weight: 2.5 gTotal capacitance: 160 pFDimensions: (W) 437mm; (D) 369mm; (H) 138mmWeight: 6kgCountry of manufacture: GermanyYear(s): 1987-1990 will ship world wide with tracking from Sweden. International shipping is correct.Will combine shipping. please ask any and all questions before bidding.