MICRO SEIKI ARM BOARD AX-1 (#1) This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI HALTESCHEIBE für Tonarm von einem DDX-1000 für AX-1 und andere Tonarmbasen.Passt für viele Tonarme und Basen bitte einfach einmal nachlesen.Achtung ist ein original von meinem alten DDX 1000 kein Nachbau.Keine Schrauben oder sonstige Teile dabei nur die Haltescheibe habe ich beim aufräumen gefunden, den Plattenspieler habe ich leider vor langer Zeit verkauft. Versand als schneller Priobrief mit Sendungsverfolgung Sehr gerne auch kostenlose Abholung. Bitte fragen Sie und gerne sende ich noch bessere , schönere Bilder Verkauf ohne Garantie und Rücknahme Privatverkauf, daher keine Garantie oder Rücknahme. Ich gebe als Privatverkäufer weder Garantie, noch Gewährleistung, Rückgabe oder Rücktritt sind ausgeschlossen, Sämtliche Angaben, auch Herstellerangaben oder Testberichte, dienen lediglich der Artikelbeschreibung und stellen keine zugesicherten Eigenschaften dar. Fragen Sie bitte vor Abgabe eines Gebotes. Der Käufer trägt bei nicht Versichertem Versand das Verlust und das Transportrisiko. Ich bitte um Ihr Verständnis. Danke Keine Abmahnung ohne vorherigen Kontakt! Sollte der Inhalt oder die Aufmachung dieser Seiten fremde Rechte Dritter oder gesetzliche Bestimmungen verletzen, so bitte ich um eine entsprechende Nachricht ohne Kostennote. Die Beseitigung einer möglicherweise von diesen Seiten ausgehenden Schutzrecht-Verletzung durch Schutzrecht-InhaberInnen selbst darf nicht ohne meine Zustimmung stattfinden. Ich garantiere, dass die zu Recht beanstandeten Passagen unverzüglich entfernt werden, ohne dass von Ihrer Seite die Einschaltung eines Rechtsbeistandes erforderlich ist. Dennoch von Ihnen ohne vorherige Kontaktaufnahme ausgelöste Kosten werde ich vollumfänglich zurückweisen und gegebenenfalls Gegenklage wegen Verletzung vorgenannter Bestimmungen einreichen.

MICRO SEIKI ARM BOARD AX-1 (#1) This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-2 (#2) **This sale is for One Arm Board This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-1 (#2) **This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-4 This listing is for one Arm Board This Micro Seiki AX-4 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. We have listed an exact reproduction of the original AX-4 on another ad. (The reproduction is almost triple the weight of the original part so its probably made of steel, an alloy of iron and carbon.) As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad, we recently listed five other M.S. arm boards in addition to this one. The Micro Seiki DDX-1000 shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-2 (#1) ** This listing is for one armboard This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos one of the mounting screws is broken. Its possible to re-tap the hole but this arm board is non functional as it is. The price reflects the damage. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

Condition Description? State It is in a beautiful state with gloss as a whole. ? Product details Manufacturer: MICRO Model number: A-4S DDL-100 / 120/150 with MICRO MA-505L on turntable It is a sub-arm base that enables the long tone arm of SAEC WE-308L to be used. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Micro Seiko DDX 1000 DD-2 magazine ad. From the October 77 issue of Audio Magazine. It is an original. In good condition. Safely packed, we do include a stiff cardboard insert, the insert and ad wrapped with saran wrap and a Please Do Not Bend sticker on the envelope to help preserve the integrity of the ad.

Condition Description? State It is in a beautiful state with gloss as a whole. ? Product details Manufacturer: MICRO Model number: A-4S DDL-100 / 120/150 with MICRO MA-505L on turntable It is a sub-arm base that enables the long tone arm of SAEC WE-308L to be used. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.