This offer is for 2 pieces 2 x ECC82 (12AU7) Philips Miniwatt - Made in Holland first type - square D getter - long plates 1 x ECC82 Philips Miniwatt - black code on Bottom : k6P?1P1 x ECC82 Philips Miniwatt - code on tube: k61?5L tested on Sencore Mighty Mite II - TC114 Tubetester + Funke W18 goodtube 1: 10/12 mA - tube 2: 8/11 mA (see pictures/test)no guarantee for 50/60/70 years old tubes (for the sound/hum etc.) no discuss/warranty about results of other tube-tester (all tester/countries/voltage is different)!There is no warranty or returns based on what any other tube tester reports. Important to know!EXPRESS SHIPPING: USPS for the US (45 USD) 3-7 working days USPS for Canada (43 USD) 3-8 working days TNT/FedexAsia/Australia (55 USD) 3-7 working daysI offer no low cost shipping! EU and Europe (17 USD) nothing changed 7-14 working days

Coppia valvole, tube, Philips miniwatt EABC80 ed ECC82, Non testate. ho rimosso la protezione in gommapiuma che nel tempo si era rovinata, non testate poichè non ho lattrezzatura adatta allo scopo La spedizione internazionale può variare in base alla destinazione

I HAVE FOR SALE A RARE LOT OF 18 x ECC82 12AU7MULLARD, PHILIPS MINIWATT ,MAZDA, BRIMAR, Ei IN SUPERB CONDITION AND GOOD WORKING ORDER A GOOD RANGE OF READINGS -ALL GOOD SERVICEABLE TUBES ??AVO VCM163 TESTED READINGS CAN BE SEEN IN THE LISTINGS 100% = Ia 10.5 gm 2.2 ?PLEASE SEE MY OTHER AUCTIONS?

Coppia valvole, tube, Philips miniwatt EABC80 ed ECC82, Non testate. ho rimosso la protezione in gommapiuma che nel tempo si era rovinata, non testate poichè non ho lattrezzatura adatta allo scopo La spedizione internazionale può variare in base alla destinazione

Tube doccasion PHILIPS / MINIWATT ECC82 Testé sur Métrix 310 ? Va:250V / Vg1:-8,5V Triode 1 ? Ia= 11,1mA (105%) Triode 2 ? Ia= 11,7mA (111%) Datasheet Tube neuf: 250V / -8,5V ? Ia=10,5mA Pas de boite dorigine

Coppia valvole, tube, Philips miniwatt EABC80 ed ECC82, Non testate. ho rimosso la protezione in gommapiuma che nel tempo si era rovinata, non testate poichè non ho lattrezzatura adatta allo scopo La spedizione internazionale può variare in base alla destinazione

PHILIPS MINIWATT HEERLEN ECC82 12AU7 VALVE TUBE VINTAGE COLLECTIBLE, AND DECORATIVE Well protected and tracking number. $ $ $ $ ! ! ! GREAT PRICES ! ! ! $ $ $ $ For any problem our question about the item please message me i will be glad to help.For Shipping Charges for other countries, please, contact the seller. Bidders from outside the European Union are welcome.Appreciate feedback soon as you get the item. PLEASE contact me before complaining to Ebay, I am POSITIVE that we can work something out that both of us will be happy with. CHECK OUT MY OTHER ANTIQUES COLLECTIBLES ITEMS !!! THANKS FOR LOOKING AND GOOD BIDDING

Normal 0 21 false false false FR X-NONE X-NONE Condition TEST (datasheet) Va=250V Vg1=-8,5V Ia=10,5mA ECC82 Gf8 MINIWATT SMALL RING GETTER RIBBED PLATES ?5E2 Code 7,1mA/7,9mA ECC82 Gf8 MINIWATT SMALL RING GETTER RIBBED PLATES ?5L1 Code 7,5mA/7,4mA ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6J44 code 11,0/11,3 (20,6/20,8) 102/105 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6K45 code 13,3/14,9 (23,8/24,9) 114/119 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 5539 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 12,2/13,1 (22,7/23,8) 110/120 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k6A MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES 45° CLOSE D-GETTER ?2 k6A bottom code 10,2/9,1 (19,5/17,8) 100/97 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F7L5 code 8,8/8,8 (16,5/16,7) 85/85 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT SILVER ANODES IN LONG GREY RIBBED PLATES ROUND SIDE HOLE SMALL RING GETTER F8H4 8,1/10,0 (16,4/17,8) 76/84 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6B6 code 9,0/8,2 (16,6/15,2) 75/74 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT SILVER ANODES IN LONG GREY RIBBED PLATES SMALL RING GETTER F8F3 code 8,5/8,0 (15,5/15,2) 72/59 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 9,8/9,1 (18,6/17,3) 92/85 5539 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 9,9/9,8 (19,2/18,8) 95/95 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 5538 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 14,9/14,1 (25,9/24,3) 118/112 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 5539 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 11,9/9,2 (20,7/17,0) 92/84 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) Gf8 MINIWATT GREY RIBBED PLATES STRAIGHT COPPER ARMS RING GETTER ?6E3 code 9,1/8,5 (16,6/15,2)mA 73/69 Gf8 MINIWATT GREY RIBBED PLATES STRAIGHT COPPER ARMS RING GETTER ?6J2 code 10,0/9,3 (17,0/16,5)mA 78/69 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k63 MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 code 10,9/12,0 (20,1/21,9) 12,7/12,4 (23,0/22,9) 102/111 114/108 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

PHILIPS MINIWATT HEERLEN ECC82 12AU7 VALVE TUBE VINTAGE COLLECTIBLE, AND DECORATIVE Well protected and tracking number. $ $ $ $ ! ! ! GREAT PRICES ! ! ! $ $ $ $ For any problem our question about the item please message me i will be glad to help.For Shipping Charges for other countries, please, contact the seller. Bidders from outside the European Union are welcome.Appreciate feedback soon as you get the item. PLEASE contact me before complaining to Ebay, I am POSITIVE that we can work something out that both of us will be happy with. CHECK OUT MY OTHER ANTIQUES COLLECTIBLES ITEMS !!! THANKS FOR LOOKING AND GOOD BIDDING

PHILIPS Miniwatt ECC82 12AU7 Herleen Delta code Gf8/Gf9 matched pair..Valvole usate, testate e perfettamente funzionanti. Gm=2500/2600 10.5/10 ma Gm=2500/2500 10.5/11 ma Foto reali dell'oggetto in vendita

4 X ECC82 12AU7 PHILIPS MINIWATT.Holland made, Herleen Plant. Factory ? date code. O getter, flashy log on. Great audio tubes.Tested ok on TV7-A/UValues= 90-90, 96-95, 90-91, 92-92.Combined shipping is accepted. Shipping well packed by International postal post, certificated & registered. Tracking & Signed to delivery.