Elac Debut 2.0 A4.2 Atmos Speakers Black Open Box But Never Removed (Pair).

Good condition. Slight scratching on one edge of each speaker. Not very noticeable.Great for Dolby Atmos height channels in any room! SpecsSpeaker type: Coaxial, sealedTweeter: 1 x 0.5-inch polymer domeWoofer: 1 x 4-inch woven aramid-fiber coneCrossover frequency: 5,000 HzFrequency response: 180 to 20,000 HzSensitivity: 85 dB at 2.83 v/1mRecommended amplifier power: 20 to 80 wpcNominal/peak power handling: 50 / 80 wpcNominal impedance: 6 ?; minimum 5.1 ?Binding posts: 5-way metalMagnetic shielding: NoCabinet finishes: Black Ash vinylHeight: 4.92 in / 125 mmWidth: 7.09 in / 180 mmDepth: 9.21 in / 234 mmNet weight (each): 5.5 lb / 2.5 kg

Elac Debut Model DA41-BK Dolby Atmos Speakers Pair.

Both speakers in perfect unmarked condition.

Elac Debut Model DA41-BK Dolby Atmos Speakers Pair. Condition is Used. Collection in person only.

Brown Ink Pen - eqw9598

Both speakers in perfect unmarked condition.

In excellent like new condition. Dolby’s solution for adding height channels to an Atmos-capable home cinema system where mounting speakers in or on the ceiling is not possible. Elac’s A4 speakers are designed to sit on top of the front or rear speakers and bounce the height channel off the ceiling and down to the listening position, creating the illusion that the sound is coming from speakers in the ceiling. Please note: These speakers rely on bouncing the height channel from a flat, hard ceiling. They will provide little or no height effect from a textured ceiling. More info in Dolby’s Atmos for Home Theatre guide: https://www.dolby.com/siteassets/technologies/dolby-atmos/atmos-installation-guidelines-121318_r3.1.pdf

Elac Debut A4.2 Atmos Speakers. Immaculate condition, complete with original packaging and instructions   Although billed as upfiring I used them as height speakers in a 7.1.4 setup. Sounded great, in fact better than what I’ve replaced with. But my new ones have greater partner approval. I had them matched with B&W floor mounters. Works well too as upfiring from either on top or off to the side UK bidders only. Specifications With Dolby Atmos-enabled AV receivers and processors, simply add the Debut A4.2 to the top of your bookshelf or floorstanding speakers to achieve dimensionality that puts you in the middle of the music and the action. Woven Aramid-Fiber Woofer Woven aramid fiber offers a superior stiffness-to-weight ratio and damping over common polypropylene or paper cones. The added strength allows more flexibility in design to achieve a smooth, extended low-frequency response. Dolby Atmos Certified This speaker is designed to sit on top of a traditional floorstanding or bookshelf speaker to add a height dimension to your home theater system without the need for in-ceiling speakers.* Custom Concentric Driver Designed by Andrew Jones, this concentric driver delivers an exceptional audio experience and offers a smoother, more extended response and better directivity control over conventional full-range drivers Intricate A custom crossover with audio-grade components has been designed to ensure smooth transition between drivers A4.2 SPECIFICATIONS Speaker TypeCoaxial, Sealed Tweeter1 x 0.5-inch Polymer Dome Woofer1 x 4-inch Woven Aramid-fiber Cone Crossover Frequency5,000 Hz Frequency Response180 to 20,000 Hz Sensitivity85 dB at 2.83 v/1m Recommended Amplifier Power20 to 80 wpc Nominal/Peak Power Handling50 / 80 wpc Nominal Impedance6 ?; minimum 5.1 ? Binding Posts5-way metal Magnetic ShieldingNo Cabinet FinishesBlack Ash Vinyl Dimensions (H x W x D)125 mm x 180 mm x 234 mm (4.92 x 7.09 x 9.21)

Both speakers in perfect unmarked condition.

Dolby’s solution for adding height channels to an Atmos-capable home cinema system where mounting speakers in or on the ceiling is not possible. Elac’s A4 speakers are designed to sit on top of the front or rear speakers and bounce the height channel off the ceiling and down to the listening position, creating the illusion that the sound is coming from speakers in the ceiling. Please note: These speakers rely on bouncing the height channel from a flat, hard ceiling. They will provide little or no height effect from a textured ceiling. More info in Dolby’s Atmos for Home Theatre guide: https://www.dolby.com/siteassets/technologies/dolby-atmos/atmos-installation-guidelines-121318_r3.1.pdf Condition: Mint, as new.

Both speakers in perfect unmarked condition.