Condition is fair on both. One has the 12v trigger and the other does not. They work perfectly, but have plenty of wear due to age: scuffs, scratches, but no dents. Please scrutinize the HD photos (which you can enlarge) to decide if this unit is for you. I am replacing both with one brand new bigger amp. URL from Rotel https://www.rotel.com/sites/default/files/product/infosheets/RB1070_InfoSheet_LR.pdf Manufacturers Description: The latest interpretation of a classic Rotel award winning power amplifier, the RB-1070 continues the tradition of oversized toroidal transformer and high capacity power supply. In addition, Symmetrical Signal Trace circuit topology assures the precise inter-channel timing clues necessary for pinpoint stereo reproduction. At 130 watts per channel, the RB-1070 is more than capable of meeting the challenges of even the least efficient loudspeakers. An internal bridge option provides truly prodigious330 watt output capability. Front panel LED status indicators show power, protection, and bridged mode for instant system analysis. A separate input and output for 12 volt “trigger” signals and detachable AC cord increase this amplifier’s flexibility by allowing total integration with even the most complex remote-controlled systems. Specifications: Power Configurations: 2 x 130 watts Watts/Channel: all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD130 watts(bridged mono)THD (20-20,000Hz) cont. rated power one-half rated power one watt per channel0.03%, maximum0.03%, maximum0.03%, maximum IM Distortion (at rated power, 60Hz:7kHz = 4:1): 0.03%, maximum Damping Factor (8 ohms): 500Input Sens. / Impedance: 1.0V / 33k ohms Frequency Response: 4-100kHz (=0.5dB, -3dB)S/N Ratio (IHF A): 120dBPower Consumption: 400 wattsDimensions (W x H x D): 433 x 121 x 334mm17 1/8 x 4 3/4 x 13 1/8Front Panel Height: 109 mm, 4.3”Weight (net): 10.2 kg / 22.4 lbs RB 1070 High Current Two Channel Amplifier D

1 x JJ Pre Amp Tube ECC81 / 12AT7 / 7062 - Gain Factor 60 - FULLY TESTED So its a slightly softer and a bit quieter in volume , pre amp valve , if you want a cleaner sound too , compared to using a 12ax7/ECC83 pre amp valve with a gain factor of 100, which is louder and breaks up/distorts at lower volumes/when volume pushed. FULLY WORKING AND TESTED - sound great - hardly used / tested great No longer needed

TelefoníaConsolas y VideojuegosInformáticaTV y VideoFotografíaJoyeríaRelojesInstrumentosDeportesMúsica profesionalBricolajeSonidoElectrodomésticosVerifica que las fotos del producto se corresponden con la idea que tienes sobre él.No realizamos envíos a las Islas Canarias, Ceuta y Melilla.Estamos para ayudarte. Consulta tus dudas en [email protected] nuestros artículos tienen 2 años de garantía.ALTAVOCES HIFI D.A.S FACTOR 5 17657028MARCAD.A.SMODELOFACTOR 5POTENCIA160BLUETOOTHNÃOUNIDADES2VIAS2IMPEDANCIA16INFORMACION ADICIONALVERIFIQUE OS DETALHES DE USO NAS IMAGENS.SINAIS MUITO OBVIOS DE USO, COM ARRANHOES E MOSSAS. REVER IMAGENS.REVER AS MARCAS DE USO DO ARTIGO NAS IMAGENS;RISCOS, AMOLGADO, USO DO ARTIGO MUITO EVIDENTECódigoPT001_E539007_0ESTADO: USADO51.95€ -->Disponibilidad: En existenciaAñadir a cestaComprar ahora-->No realizamos envíos a las Islas Canarias, Ceuta y Melilla.Estamos para ayudarte. Consulta tus dudas en [email protected] nuestros artículos tienen 2 años de garantía.Envíogratuito2 años degarantía14 días desatisfacciónAtenciónal cliente

YOU ARE LOOKING AT A NEW CRESTRON SEALED BOX. 70M HDMI TRANSMITTER WITH COM/IR BOX FORM FACTOR 04 23 2020 THANKS FOR LOOKING.

1 x JJ Pre Amp Tube ECC81 / 12AT7 / 7062 - Gain Factor 60 - FULLY TESTED So its a slightly softer and a bit quieter in volume , pre amp valve , if you want a cleaner sound too , compared to using a 12ax7/ECC83 pre amp valve with a gain factor of 100, which is louder and breaks up/distorts at lower volumes/when volume pushed. FULLY WORKING AND TESTED - sound great - hardly used / tested great No longer needed