GOLDRING G1042 Audiophile Moving Magnet Stereo Hi-Fi Cartridge with OEM Gyger-S Stylus VGC, Used – Superb! Update: Includes original stylus guard! I found it, and have now added a couple of photos for you! I have a high-end audio set-up and am selling off some of my many components and cartridges - only to fund some more purchases! Here’s my superb Goldring G1042 moving-magnet cartridge and original OEM stylus complete; it’s not in original packaging but I am including a copy of the original Instruction/Spec Sheet (and the stylus guard). I’ve included a detailed description of the item at the foot of this auction. This is Goldring’s flagship MM model, with many audio-industry awards behind it; a superb performer. The stylus on this one is probably half-way through its expected life, having been in use by me from new for about a year so there is plenty of mileage for you to enjoy. A new G1042 stylus can be purchased by around £200 and a complete cartridge is at least £325 – so obtaining this part-used one does represent decent value! You can however use any of the Goldring G1000 styli with this cartridge body, so you can spend a far smaller budget for a replacement if required - or go for the top-of-the-range G1042 Gyger-S. It’s only been used on my Roksan Xerxes 20 Plus turntable - it’s a wonderful performer as you’d expect on a good turntable, with the excellent Gyger-S stylus tracking brilliantly at around 1.8 Grams. A fine full-range wide soundstage and even-handed balance are hallmarks of this top-rated cartridge. All photos are of the item for sale except the last two, which are off the internet. I have pictured it still attached to the Tabriz-Zi tonearm on my Roksan T/T as well as other pics of the stylus assembly. Apologies if these aren’t too clear as it’s nigh-on impossible to photograph something as minute as the stylus! No, you don’t get my Roksan or tonearm or T/T, just the cartridge! I have another G1042 that I’m keeping, along with other Audio-Technica and Excel cartridges to use on my Roksan, so am happy to pass this cartridge on for another enthusiast to enjoy. As with any item like this, it is subject to the wear process, so no warranty or return can be applied to this sale.Technical Specification: Frequency Response: 20 Hz-20 kHz +/- 3 dB Channel Balance: within 2 dB @ 1 kHz Channel Separation: better than 25 dB @ 1 kHz Sensitivity: 6.5 mV +/-1.5 dB, 1 kHz @ 5 cm/sec Static Compliance: 20 mm/N Dynamic Compliance @ 10 Hz: 10 mm/N Equivalent tip mass: 0.45 mg Vertical Tracking Angle: 24° Stylus Radius: Gyger S Stylus Type: Replaceable Load Resistance: 47 k? Load Capacitance: 150-200 pF Internal Inductance: 570 mH Internal Resistance: 660 ? Cartridge Mass: 6.3 grams Cartridge Mass (inc. fixings): 7.6 grams Fixing Centre: 0.5 (12.7 mm) Playing Weight: 1.5 - 2.0 grams (1.7 grams nominal)The item will be well-packed to ensure safe carriage and it can be shipped to eBay-approved destinations abroad. Postal costs cited show only delivery to a UK location or eBay’s UK Global Shipping Centre.The package will be enclosed in a waterproof bag and well-packed for shipment.Payment is by PayPal or cash on collection (I’min north Birmingham B24). Please pay within 5 days of the auction end.Auction price plus carriage costs must be agreed and paid in full prior to dispatch. No return or refunds will apply to this auction. Photos are of the actual item for sale.Collection from me in north Birmingham B24 (Jn.6 of the M6) is possible, or I will arrange carriage.Postal costs shown are for standard Royal Mail inland UK charges. There may be variation in the frequency and reliability of postal deliveries, and delays during restricted Post Office opening times or industrial action. Shipping and taxation charges applicable to anon-UK destination or territory will be (without exception) subject to the territories & terms of the eBay Global Shipping Programme at the buyer’s expense.Happy Bidding! Description:This is a cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user-replaceable stylus. The 1042 uses a nude, natural-diamond stylus with a Gyger Sprofile. This is a revolutionary line-contact type which is shaped to more closely resemble the record cutting head than any previous design. The stylus profile is the main factor governing overall sound quality in a cartridge and the shape of the Gyger-S with its 6 µm radius allows it to trace the smallest groove detail with complete fidelity. Mid-range tonality is incredibly accurate and precise with high frequency sibilance banished. The extended side-wall contact of the Gyger-S diamond also gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.The 1000 series uses a strong one-piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass-reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus-carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keep the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms. Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response. The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold-plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilises the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special Butyl rubber polymer with optimised damping characteristics. The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image.

Zum Verkauf steht ein neues Moving-Magnet-Tonabnehmersystem Goldring G1042. Der Tonabnehmer wurde vor einem halben Jahr gekauft; wegen Anschaffung einesanderen Plattenspielers ist er dann nicht mehr zum Einsatz gekommen.Er befindet sich noch in der versiegelten Originalverpackung (siehe Fotos), Lieferung erfolgt mit originaler Rechnung. Innerhalb Deutschlands fallen keine Versandkosten an, Selbstabholung ist möglich. - International bidders welcome, please ask vor shipping costs before bidding -

GOLDRING G1042 Audiophile Moving Magnet Stereo Hi-Fi Cartridge with OEM Gyger-S Stylus VGC, Used – Superb! Update: Includes original stylus guard! I found it, and have now added a couple of photos for you! I have a high-end audio set-up and am selling off some of my many components and cartridges - only to fund some more purchases! Here’s my superb Goldring G1042 moving-magnet cartridge and original OEM stylus complete; it’s not in original packaging but I am including a copy of the original Instruction/Spec Sheet (and the stylus guard). I’ve included a detailed description of the item at the foot of this auction. This is Goldring’s flagship MM model, with many audio-industry awards behind it; a superb performer. The stylus on this one is probably half-way through its expected life, having been in use by me from new for about a year so there is plenty of mileage for you to enjoy. A new G1042 stylus can be purchased by around £200 and a complete cartridge is at least £325 – so obtaining this part-used one does represent decent value! You can however use any of the Goldring G1000 styli with this cartridge body, so you can spend a far smaller budget for a replacement if required - or go for the top-of-the-range G1042 Gyger-S. It’s only been used on my Roksan Xerxes 20 Plus turntable - it’s a wonderful performer as you’d expect on a good turntable, with the excellent Gyger-S stylus tracking brilliantly at around 1.8 Grams. A fine full-range wide soundstage and even-handed balance are hallmarks of this top-rated cartridge. All photos are of the item for sale except the last two, which are off the internet. I have pictured it still attached to the Tabriz-Zi tonearm on my Roksan T/T as well as other pics of the stylus assembly. Apologies if these aren’t too clear as it’s nigh-on impossible to photograph something as minute as the stylus! No, you don’t get my Roksan or tonearm or T/T, just the cartridge! I have another G1042 that I’m keeping, along with other Audio-Technica and Excel cartridges to use on my Roksan, so am happy to pass this cartridge on for another enthusiast to enjoy. As with any item like this, it is subject to the wear process, so no warranty or return can be applied to this sale.Technical Specification: Frequency Response: 20 Hz-20 kHz +/- 3 dB Channel Balance: within 2 dB @ 1 kHz Channel Separation: better than 25 dB @ 1 kHz Sensitivity: 6.5 mV +/-1.5 dB, 1 kHz @ 5 cm/sec Static Compliance: 20 mm/N Dynamic Compliance @ 10 Hz: 10 mm/N Equivalent tip mass: 0.45 mg Vertical Tracking Angle: 24° Stylus Radius: Gyger S Stylus Type: Replaceable Load Resistance: 47 k? Load Capacitance: 150-200 pF Internal Inductance: 570 mH Internal Resistance: 660 ? Cartridge Mass: 6.3 grams Cartridge Mass (inc. fixings): 7.6 grams Fixing Centre: 0.5 (12.7 mm) Playing Weight: 1.5 - 2.0 grams (1.7 grams nominal)The item will be well-packed to ensure safe carriage and it can be shipped to eBay-approved destinations abroad. Postal costs cited show only delivery to a UK location or eBay’s UK Global Shipping Centre.The package will be enclosed in a waterproof bag and well-packed for shipment.Payment is by PayPal or cash on collection (I’min north Birmingham B24). Please pay within 5 days of the auction end.Auction price plus carriage costs must be agreed and paid in full prior to dispatch. No return or refunds will apply to this auction. Photos are of the actual item for sale.Collection from me in north Birmingham B24 (Jn.6 of the M6) is possible, or I will arrange carriage.Postal costs shown are for standard Royal Mail inland UK charges. There may be variation in the frequency and reliability of postal deliveries, and delays during restricted Post Office opening times or industrial action. Shipping and taxation charges applicable to anon-UK destination or territory will be (without exception) subject to the territories & terms of the eBay Global Shipping Programme at the buyer’s expense.Happy Bidding! Description:This is a cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user-replaceable stylus. The 1042 uses a nude, natural-diamond stylus with a Gyger Sprofile. This is a revolutionary line-contact type which is shaped to more closely resemble the record cutting head than any previous design. The stylus profile is the main factor governing overall sound quality in a cartridge and the shape of the Gyger-S with its 6 µm radius allows it to trace the smallest groove detail with complete fidelity. Mid-range tonality is incredibly accurate and precise with high frequency sibilance banished. The extended side-wall contact of the Gyger-S diamond also gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.The 1000 series uses a strong one-piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass-reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus-carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keep the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms. Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response. The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold-plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilises the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special Butyl rubber polymer with optimised damping characteristics. The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image.

GOLDRING G 1042. DA RISTILARE, COMPLETA DI SCATOLA VINTAGE(esternamente la scatola ein condizioni pessime, vedi foto). La testina e funzionante in entrambi i canali, testata con strumento.

Vendo per scarso utilizzo testina Goldring 1042in perfetto stato e con confezione originale.Acquistata alla fine del 2020, ma raramente utilizzata: meno di 30 ore, per la difficoltà di montaggio sul mio Roksan Nima. In rete ci sono moltissime recensioni lusinghiere su questa testina, vi riporto un estratto di TNT...La G1042 utilizza uno dei profili più avanzati in circolazione per lo stilo: il Gyger S, unito ad un cantilever estremamente leggero.Il Gyger S è della famiglia dei profili Line-Contact, il che significa, in parole povere, che lo stilo ha una maggiore superficie di contatto con il solco, avvicinandosi maggiormente al profilo dello stilo incisore e quindi ottenendo una migliore risposta alle alte frequenze. La sospensione del cantilever è stranamente rigida, per essere quella di una magnete mobile. Come risultato la forza di tracciamento si attesta su 1.65 grammi, anche se io la faccio tracciare più vicina ai due, esattamente come molte testine MC. A differenza di molte testine economiche MC ad alta uscita, che hanno una gobba di +3 dB nelle frequenze medio-alte, la G1042 ha una risposta essenzialmente piatta, con un leggero roll-off di -1 dB a calare sulle alte.Luscita è molto elevata (circa 6.5 mV @ 5cm/s) e quindi laccoppiamento è ottimale anche con le sezioni phono di certi ampli economici (un po rumorose) o con certi stadi phono a valvole che hanno la tendenza ad avere un guadagno inferiore rispetto ai concorrenti a stato solido. Insieme al prezzo, queste caratteristiche rendono questa testina una sorta di pietra di paragone per le concorrenti... Non esitate a chiedere se avete necessità di ulteriori infoE una vendita fra privati, esclusa ogni forma di garanzia

Goldring 1042 MM Cartridge Used For Less Than 5 Hours.. Recently purchased a used turntable/arm/cartridge. The cartridge was a Goldring 1020 I replaced the stylus with a D42 (Goldring 1042) purchased from HiFi Madness (Audio Affair) 215 16th May 2023. Mounted it and listened to it twice very pleased superb detail and dynamics. Only reason for sale I have been offered a rare as new Reson/DNM Reca MM Cartridge the very best version of the Goldring 1042 except for the Audio Note IQ3. So a genuine opportunity to get a as new Goldring 1042 with brand new stylus and run in body. Comes with mounting nuts. Original receipt included, stylus still under guarantee. Current RRP 399. Less than half price with just 5 hours use!!! Get a bargain it wont hang around...

Cellule Hi-Fi MM Goldring 1042 Très peut utilisé 20h max État neuf dans sa boîte

Offered here is a Goldring G 1042 MM phono cartridge. Item is NOB (new, open box), as new. Top of the 1000 series... What Hi-Fi?: The real joy here is how this cartridge brings out the depth of a recording. It achieves this partly by virtue of eliminating noise, or at least not picking so much of it up. The backgrounds are remarkably quiet, which means music has lots of contrast and really produces a believable image in the room... Specs:Frequency Response: 20Hz-20kHz±3dBChannel Balance: 2dB @ 1kHzChannel Separation: 25dB @ 1kHzSensitivity: 6.5mV±1.5dB, 1kHz @ 5 cm/secStatic Compliance: 24mm/N lat., 16mm/N vertEquivalent tip mass: 0.45 mgVertical Tracking Angle: 24°Stylus Radius: Gyger SStylus Type: ReplaceableLoad Resistance: 47,000 OhmLoad Capacitance: 150-200pFInternal Inductance: 570 mHInternal Resistance: 660 OhmCartridge Weight: 6.3gFixing Center: 12.7mmPlaying Weight: 1.5-2.0g (1.7g nom.) As always,100% satisfaction guaranteed. Check my feedback as seller. (m.)