Pioneer SX-1000 front panel with switches, dial drum and indicator. This is from a recently parted out receiver. This is for parts only. Any questions gladly answered via e-mail.

International Buyers: I am offering eBay’s Global Shipping and International Standard Delivery on this listing. Tuner frame and dial pointer assembly for vintage 1940s Andrea T-VK12 TVs and others. Has both pointers and all 4 string pulleys. Cosmetics are very good overall, burgundy red flocking still good, lubrication for pointer glides and string wheels has dried up and will need to be removed and reapplied before use. Unit measures 7 3/8 tall x 7 7/8 wide. Sold as-is, display only, non-working, no returns. This was removed from a model T-VK12 chassis along with most all the other usable parts I plan to list on eBay. Please ask if there is something you want listed off this chassis and if I still have it I will do my best to get to it quickly and take the pictures needed. The pictures below are of the actual vintage television parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes in the U.S., Global Shipping and International Standard Delivery all come with insurance. As always, International Bidders are welcome to participate. The 1948 Andrea model T-VK12 TV and the chassis this tuner goes to.

Assembled ATU-130 Plus ATU-130+ 1.8-50MHz 200W Automatic Antenna Tuner OLED V9R8 Simple instructions: use, the antenna needs to be well grounded, and the RF inlet of the antenna is connected to the RF outlet of the short-wave machine with a radio frequency wire. The RF outlet of the antenna is connected to the antenna (Recommended to set up a height of 3-6 meters above the ground and a length of 7-22 meters above 4 square meters. It is recommended to take -Pattern protection measures at high , such as -rods).Connect to the antenna power plug (12~15VDC, generally shared with the shortwave machine). Switch on the power of the short-wave machine, switch on the power of the antenna, and the equipment self-check shows normal.Adjust the shortwave transmitter to the operating frequency, set the working mode to AM, FM, CW, or FT8, RTTY, etc. (the mode that can continuous carrier), press the shortwave transmitter or CW key to trigger the transmission, 10W power continuous transmission, At this time, the antenna tuning starts to adjust automatically. When the standing wave is less than 1.5, the antenna turner will automatically stop tuning and stop transmitting.At this time, at the current frequency point, change the shortwave radio to the mode that will work, and you can use it with . When switching frequency bands, the tuning operation needs to be performed again. If the antenna turner is not within 1.5, you can press the TUNE button to reset the tuning and repeat the above tuning process again until the standing wave reaches within 1.5.If it is still not tuned, the impedance of the antenna feed system may the tuning range of the antenna, or check the grounding. If there is no tuning action on the antenna: check whether the cable is connected to Block M well, whether the antenna is in automatic mode, whether the shortwave machine is in the mode, whether the tuning power reaches the trigger condition (more than 10W), and whether the antenna is faulty.Note:

Assembled ATU-130 Plus ATU-130+ 1.8-50MHz 200W Automatic Antenna Tuner OLED W4Q2 Simple instructions: Before use, the antenna needs to be well grounded, and the RF inlet of the antenna is connected to the RF outlet of the short-wave machine with a radio frequency wire. The RF outlet of the antenna is connected to the antenna (Recommended to set up a height of 3-6 meters above the ground and a length of 7-22 meters above 4 square meters. It is recommended to take -Pattern protection measures at high , such as -rods).Connect to the antenna power plug (12~15VDC, generally shared with the shortwave machine). Switch on the power of the short-wave machine, switch on the power of the antenna, and the equipment self-check shows normal.Adjust the shortwave transmitter to the operating frequency, set the working mode to AM, FM, CW, or FT8, RTTY, etc. (the mode that can provide continuous carrier), press the shortwave transmitter or CW key to trigger the transmission, 10W power continuous transmission, At this time, the antenna tuning starts to adjust automatically. When the standing wave is less than 1.5, the antenna turner will automatically stop tuning and stop transmitting.At this time, at the current frequency point, change the shortwave radio to the mode that will work, and you can use it with . When switching frequency bands, the tuning operation needs to be performed again. If the antenna turner is not within 1.5, you can press the TUNE button to reset the tuning and repeat the above tuning process again until the standing wave reaches within 1.5.If it is still not tuned, the impedance of the antenna feed system may exceed the tuning range of the antenna, or check the grounding. If there is no tuning action on the antenna: check whether the cable is connected to Block M well, whether the antenna is in automatic mode, whether the shortwave machine is in the correct mode, whether the tuning power reaches the trigger condition (more than 10W), and whether the antenna is faulty.Note:

Finished/Assembled ATU-100 Automatic Antenna Tuner Board 1.8-50MHz 100W By F8Y2 Features:The antenna tuner will automatically tuned, suitable for most radio stations.With 0.96inch OLED display screen, so you can see the data more clearly, give you a better using experience.Minimum tuning power is 2.5W, compared with other types, this antenna automatic tuner more suitable for the low power radio to use.Color as shownSpecifications:Power Range: 10-15 Maximum current: 450mAMaximum operating power: 100 Maximum measured power: 150 Minimum power for tuning start: 1 wattRecommended maximum power, while tuning should not exceed 30 . (after adjustment, you can use 100 and use this power supply)Minimum measurement power: 0.1 Measurement steps 10 : 0.1 Measurement steps for power above 10 : 1 wattPower measurement accuracy: 10%Maximum Induction Setting: 8.5 uHMinimum step size for sensing settings: 0.1 uHMaximum installed capacity: 1870 pFMinimum step size for setting capacitance: 10 pFMaterial: PCB + electronic accessoriesPackage Contents:1 x ATU-100 Automatic Antenna Tuner Finished Board

ENSEMBLE PLATINE LECTEUR CASSETTE TUNER AMPLI THOMSON TL113TPlatine tourne disque Thomson TL113T (manque juste la courroie)Lecteur cassette Thomson DK747TTuner Thomson TS3147T (manque 2 patin sous tuner)Ampli Thomson PA4047T Tout est fonctionnelle mais prevoir un coup de depoussierage nettoyage A SAISIR ***********lou

Vente Chaude Connexe

Finished/Assembled ATU-100 Automatic Antenna Tuner Board 1.8-50MHz 100W By J2G1 Features:The antenna tuner will automatically tuned, suitable for most radio stations.With 0.96inch OLED display screen, so you can see the data more clearly, give you a better using experience.Minimum tuning power is 2.5W, compared with other types, this antenna automatic tuner more suitable for the low power radio to use.Color as shownSpecifications:Power Range: 10-15 Maximum current: 450mAMaximum operating power: 100 Maximum measured power: 150 Minimum power for tuning start: 1 wattRecommended maximum power, while tuning should not exceed 30 . (after adjustment, you can use 100 and use this power supply)Minimum measurement power: 0.1 Measurement steps 10 : 0.1 Measurement steps for power above 10 : 1 wattPower measurement accuracy: 10%Maximum Induction Setting: 8.5 uHMinimum step size for sensing settings: 0.1 uHMaximum installed capacity: 1870 pFMinimum step size for setting capacitance: 10 pFMaterial: PCB + electronic accessoriesPackage Contents:1 x ATU-100 Automatic Antenna Tuner Finished Board

Adcom GTP-550 board X-1205A02T removed from working unit

ensemble JVC AMPLI AK 200 TUNER K 100L DECK KDV 100 TBE VINTAGE TRES BON ETAT VISUEL TESTE fonctionne correctement SON TRES BIEN peut comporter des traces d utilisation VOIR PHOTO

Adcom GTP-760 tuner board 1722-890A-0102 good - removed from working unit

Propre, très peu de marques dusage Niveau de test : sallume sous tension 220 V, toutes les fonctions disponibles saffichent sur lécran avec la télécommande fournie. La partie tuner affiche les stations FM. Tous les boutons avant semblent opérationnelles. Lappareil na pas été testé dans un ensemble chaîne audio/video. (pas déquipements?).Peux être testé à mon domicile avec votre matériel si geographiquement possible. (94100 St-Maur).Rien ne soppose visuellement à un fonctionnement total. Fourni avec câble dalimentation, télécommande. Poids non emballé : 8.3 kg.

Original Heathkit High Fidelity AJ-31 Vacuum Tube FM Tuner Assembly Manual with fold-out sheet. Inside pages are very clean.

Assembled Mini 100W ATU-100 1.8-55MHz Automatic Antenna Tuner by N7DDC 7x7 Features: The device consists of a set of seven capacitors and seven inductors, which enables it (with the largest configuration) to work effectively in the broadband, 1.8-55 MHz amateur radio HF . High quality plasric housing, stable and reliable , practical, easy to operate and use, has a long service life. The antenna tuner is automatically tuned without any control wires, suitable for most radio stations. Power supply voltage: USB charging or you can install battery in it. Automatic antenna tuner is assembled,no need install by yourself . Specifications: Size: 14.5X9cm/5.51X3.54in Weight:400g/0.88lb Material: Plastic Maximum Current Consumption: 400ma Maximum Working Power: 100w Maximum Possible Measured Power: 150w Minimum Power Required To Start Tuning: 5w Minimum Possible Measured Power: 0.1w Measurement Steps With Power Up To 10w: 0.1w Measurement Steps With Power Higher Than 10w: 1w Power Measurement Accuracy: 10% Maximum Installed Inductance: 8.53uh Minimum Installation Inductance Step: 0.05uh Maximum Installed Capacitance: 1869pf Minimum Installation Capacitance Step: 10pf Number Of Panel Buttons: Power Pow, Direct, Automatic, Function Package Includes: 1 Mini Automatic Antenna Tuner note: Due to the problems of lighting effects and angles, there will be certain tolerances in the product, please understand. Please allow 0-1cm error due to the manual measurment.

Assembled ATU-130 Plus ATU-130+ 1.8-50MHz 200W Automatic Antenna Tuner OLED B4J2 Simple instructions: Before use, the antenna needs to be well grounded, and the RF inlet of the antenna is connected to the RF outlet of the short-wave machine with a radio frequency wire. The RF outlet of the antenna is connected to the antenna (Recommended to set up a height of 3-6 meters above the ground and a length of 7-22 meters above 4 square meters. It is recommended to take -Pattern protection measures at high , such as -rods).Connect to the antenna power plug (12~15VDC, generally shared with the shortwave machine). Switch on the power of the short-wave machine, switch on the power of the antenna, and the equipment self-check shows normal.Adjust the shortwave transmitter to the operating frequency, set the working mode to AM, FM, CW, or FT8, RTTY, etc. (the mode that can provide continuous carrier), press the shortwave transmitter or CW key to trigger the transmission, 10W power continuous transmission, At this time, the antenna tuning starts to adjust automatically. When the standing wave is less than 1.5, the antenna turner will automatically stop tuning and stop transmitting.At this time, at the current frequency point, change the shortwave radio to the mode that will work, and you can use it with . When switching frequency bands, the tuning operation needs to be performed again. If the antenna turner is not within 1.5, you can press the TUNE button to reset the tuning and repeat the above tuning process again until the standing wave reaches within 1.5.If it is still not tuned, the impedance of the antenna feed system may exceed the tuning range of the antenna, or check the grounding. If there is no tuning action on the antenna: check whether the cable is connected to Block M well, whether the antenna is in automatic mode, whether the shortwave machine is in the correct mode, whether the tuning power reaches the trigger condition (more than 10W), and whether the antenna is faulty.Note:

International Buyers: I am offering eBay’s Global Shipping and International Standard Delivery on this listing. Tuner frame and dial pointer assembly for vintage 1940s Andrea T-VK12 TVs and others. Has both pointers and all 4 string pulleys. Cosmetics are very good overall, burgundy red flocking still good, lubrication for pointer glides and string wheels has dried up and will need to be removed and reapplied before use. Unit measures 7 3/8 tall x 7 7/8 wide. Sold as-is, display only, non-working, no returns. This was removed from a model T-VK12 chassis along with most all the other usable parts I plan to list on eBay. Please ask if there is something you want listed off this chassis and if I still have it I will do my best to get to it quickly and take the pictures needed. The pictures below are of the actual vintage television parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes in the U.S., Global Shipping and International Standard Delivery all come with insurance. As always, International Bidders are welcome to participate. The 1948 Andrea model T-VK12 TV and the chassis this tuner goes to.

Description Automatic Antenna Tuner 100W 1.8-50MHz w/ 0.96-Inch OLED Display ATU100 Assembled with Shell Features: - 0.96-inch OLED display - Frequency 1.8-50 MHz - Power supply voltage range: 10-15V DC - Maximum current consumption: 300 mA - Maximum working power: 100W - Maximum possible measured power: 150W - Minimum power required to start tuning: 5 watts 1111 MicrosoftInternetExplorer402DocumentNotSpecified7.8 ?Normal0 - Minimum possible measured power: 0.1W - Step for measurement on powers under 10W: 0.1W - Step for measurement on powers above 10W: 1W - Power measurement accuracy: 10% - Specified maximum inductor: 8.4 uH capacity - The minimum installation step of inductor: 0.05?H - Maximum installation capacity: 1870 pF capacitor - Minimum installation step: 10 pF Package Included: -1 x Automatic Antenna Tuner with Shell Note: The product is assembled and with shell. Payment Terms 1.We accept PayPal only. 2.All major credit cards are accepted through secure payment processor PayPal. 3.Payment must be received within 7 business days of auction closing. 4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms - For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding. Return Terms 1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund. 2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA. 3. We reserve the right to refuse any returns for objective reasons. Custom Duties & Taxes 1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyers responsibility. 2. Avoiding some unnecessary trouble, please check with your countrys customs office to inform us what we should declare its value before shipping. Feedback 1. If you are dissatisfied for any reason, please dont be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. 2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.

Description Automatic Antenna Tuner 100W 1.8-50MHz w/ 0.96-Inch OLED Display ATU100 Assembled with Shell Features: - 0.96-inch OLED display - Frequency 1.8-50 MHz - Power supply voltage range: 10-15V DC - Maximum current consumption: 300 mA - Maximum working power: 100W - Maximum possible measured power: 150W - Minimum power required to start tuning: 5 watts 1111 MicrosoftInternetExplorer402DocumentNotSpecified7.8 ?Normal0 - Minimum possible measured power: 0.1W - Step for measurement on powers under 10W: 0.1W - Step for measurement on powers above 10W: 1W - Power measurement accuracy: 10% - Specified maximum inductor: 8.4 uH capacity - The minimum installation step of inductor: 0.05?H - Maximum installation capacity: 1870 pF capacitor - Minimum installation step: 10 pF Package Included: -1 x Automatic Antenna Tuner with Shell Note: The product is assembled and with shell. Payment Terms 1.We accept PayPal only. 2.All major credit cards are accepted through secure payment processor PayPal. 3.Payment must be received within 7 business days of auction closing. 4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms - For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding. Return Terms 1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund. 2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA. 3. We reserve the right to refuse any returns for objective reasons. Custom Duties & Taxes 1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyers responsibility. 2. Avoiding some unnecessary trouble, please check with your countrys customs office to inform us what we should declare its value before shipping. Feedback 1. If you are dissatisfied for any reason, please dont be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. 2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.

Vente Chaude Connexe

1.8MHz-50MHz 200W Antenna Tuner Assembled XDT-ATU N1 (XDT-ATU100) F8Y8 Antenna impedance matching functionPass-through mode and tuning mode switchingSwitch between rising impedance and falling impedance modeForward and reverse power detectionManual capacitance and inductance adjustment.Frequency range: 1.8MHz-50MHzWorking voltage: 12VWorking current: 0.5AMaximum withstand power: 200WThe minimum measured power of the instrument: 1WThe maximum measured power of the instrument: 200WInstrument measurement accuracy: 5%Meter measurement linearity: 8%Minimum step of capacitance: 10pFInductance minimum step: 50nHMaximum matching capacitance: 1609pFMaximum matching inductance: 6.35uHMaterial: plasticcolour: greenPackage Contents:1 x Antenna Tuner

Pioneer SX-1010 - Working TUNER - worked when other stuff went screwy.

Propre, très peu de marques dusage Niveau de test : sallume sous tension 220 V, toutes les fonctions disponibles saffichent sur lécran avec la télécommande fournie. La partie tuner affiche les stations FM. Tous les boutons avant semblent opérationnelles. Lappareil na pas été testé dans un ensemble chaîne audio/video. (pas déquipements?).Peux être testé à mon domicile avec votre matériel si geographiquement possible. (94100 St-Maur).Rien ne soppose visuellement à un fonctionnement total. Fourni avec câble dalimentation, télécommande. Poids non emballé : 8.3 kg.

ENSEMBLE PLATINE LECTEUR CASSETTE TUNER AMPLI THOMSON TL113TPlatine tourne disque Thomson TL113T (manque juste la courroie)Lecteur cassette Thomson DK747TTuner Thomson TS3147T (manque 2 patin sous tuner)Ampli Thomson PA4047T Tout est fonctionnelle mais prevoir un coup de depoussierage nettoyage A SAISIR ***********lou