B&O BANG AND OLUFSEN 5000 MCP MASTER CONTROL PANEL Click images to enlarge Description B&O BANG AND OLUFSEN   BEOMASTER CONTROL PANEL   5000   MCP IN VERY GOOD COSMETIC CONDITION-A COUPLE OF SMALL IMPERFECTIONS      FULLY TESTED AND WORKING GREAT      THE FOLLOWING IS COURTESY OF BEOWORLD.ORG Manfactured: 1983 - 1987 Designer: Jacob Jensen Colours: Silver, Grey The main remote control for the BEOSYSTEM 5000, the MCP 5000 allowed full control of your Beosystem from your armchair. Two way control allowed the status of the system to be ascertained easily and complex timer programming was possible using the controls under the flip down panel. The MCP 5000 could only be used with the BEOMASTER 5000 and could be part of a multi-room system allowing full control in a link room. MCP5000 will not operate any of the other systems such as the Beosystem 5500,6500 and 7000.   Master Control Panel 5000 Product Specifications Master Control Panel 5000 Types 2038 (1983 - May 1987) Dimensions: 32 x 8 x 18cm Display: Total Radio programmes: 9FM or AM Other programmes: PH-TP1-TP2-CD Beocord Controls: 10 Beogram Controls: 6 VHS91 Controls: 8 Compact Disc Controls: Total Programming: Timer + CD50 Volume Control: Yes, memory Bass, treble: Yes, memory Balance: Yes, memory Muting: Yes Status: Yes     ALL OUR ITEMS ARE FULLY INSURED UP TO THE SALE VALUE REMEMBER ITS MORE THAN AV - ITS A LIFESTYLE! ALL ITEMS ARE AVAILABLE FOR COLLECTION OR POSTAGE UNLESS CLEARLY MARKED COLLECTION ONLY   Visit My eBay Store   Add me to your Favorite Sellers THANKS FOR LOOKING Payment PREFERED METHODS OF PAYMENT ARE PAYPAL OR CASH ON COLLECTION. BANK TRANFERS ARE AVAILABLE AS ARE IBAN PAYMENTS.PLEASE CONTACT US TO ARRANGE TO PAYMENT BY THESE METHODS Shipping WE WILL ALWAYS PACK ITEMS TO THE VERY BEST OF OUR ABILITY AND ALWAYS SEND ITEMS WITH THE MOST RELEVENT COURIER-WE APPRECIATE THIS MAY NOT BE THE CHEEPEST OPTION AVAILABLE BUT THIS DOES INCLUDE QUALITY PACKING MATERIALS AND FULL INSURANCE UP TO THE SALE VALUE IF THE WORST HAPPENS REST ASSURED YOU ARE FULLY COVERED WE DO NOT OFFER A CLICK AND COLLECT SERVICE AS ANY LIABILITY FOR DAMAGE INTRANSIT CANNOT BE GUARANTEED BY A THIRD PARTY Terms of Sale ALL BUY IT NOW ITEMS ARE FULLY COVERED UNDER THE CONSUMER CONTRACTS REGULATIONS. PLEASE VIEW THE RETURN POLICY AT THE TOP OF THE PAGE About Us Quality Dream Audio is a family run business dealing in pre-owned bang and olufsen products. We have been involved with B&O since 1988 when we sold their products in stores and we have been enthusiasts ever since. We set up Quality Dream Audio in 2004 and have built the company to what it is today delivering all over the UK, Europe and beyond with over 100 items in stock. If you cannot find the product you are looking for-please ask-we may have it waiting to be listed or be able to source it for you. If you are looking for set up information or are unsure if a product is right for you then please feel free to contact us. Contact Us TO CONTACT US PLEASE USE THE CONTACT SELLER LINK AT THE TOP OF THE PAGE AND WE WILL REPLY AS SOON AS WE CAN. Get images that make Supersized seem small.Showcase your items with Auctivas Listing Templates! THE simple solution for eBay sellers. Track Page Views WithAuctivas Counter

Zum Verkauf steht eine Vintage Anlage aus meiner Sammlung: Beosystem 5000 - bestehend aus : - Beomaster 5000- Beocord 5000- Beogram CD 50- Beogram 5000 mit re-tipped MMC4 Tonabnehmer - Master Control Panel 5000-Terminal 5000 Fernbedienung- ein Paar CX 75 Boxen mit Bespannung in Silber Als Tonabnehmer wird ein re-tipped MMC4 geliefert d.h. es ist ein original B&O Gehäuse mit neuer Nadel und Gummidämpfung, die genau der Originalnadel entspricht was die Werte angeht. Diese Anlage ist ORIGINAL von Bang & Olufsen, wie sie 1983-86 ausgeliefert wurde. Lediglich die Verschleißteile (Riemen beim Plattenspieler, Tape-Deck und CD Player) wurden erneuert und der Ruhestrom der Endstufe justiert. Ansonsten ist die Anlage, wie auch die Fernbedienungen old School und ein schönes Sammlerstück, welches noch überragend klingt. Die CX75 Boxen wurden neu gesickt und bespannt von mir und haben trotz der kleinen Bauform einen sehr voluminösen Klang, den man diesen Regal-Lautsprechner nicht ansieht. Die Anlage hat nach fast 40 Jahren ein paar Gebrauchspuren, aber keine Dellen, Abbrüche oder tiefe Kratzer. Ich würde sie immer noch als Wohnzimmertauglich bezeichnen. Bitte sehen Sie sich die Bilder an und stellen Sie gern Fragen. Noch das Rechtliche: dies ist ein Privatverkauf, daher keine Rücknahme und/oder Garantie. Bitte schauen Sie sich auch meine weiteren B&O Geräte an, die ich hier verkaufe.

Zum Verkauf steht eine Vintage Anlage aus meiner Sammlung: Beosystem 5000 - bestehend aus : - Beomaster 5000- Beocord 5000- Beogram CD 50- Beogram 5000 mit re-tipped MMC4 Tonabnehmer - Master Control Panel 5000-Terminal 5000 Fernbedienung- ein Paar CX 75 Boxen mit Bespannung in Silber Als Tonabnehmer wird ein re-tipped MMC4 geliefert d.h. es ist ein original B&O Gehäuse mit neuer Nadel und Gummidämpfung, die genau der Originalnadel entspricht was die Werte angeht. Diese Anlage ist ORIGINAL von Bang & Olufsen, wie sie 1983-86 ausgeliefert wurde. Lediglich die Verschleißteile (Riemen beim Plattenspieler, Tape-Deck und CD Player) wurden erneuert und der Ruhestrom der Endstufe justiert. Ansonsten ist die Anlage, wie auch die Fernbedienungen old School und ein schönes Sammlerstück, welches noch überragend klingt. Die CX75 Boxen wurden neu gesickt und bespannt von mir und haben trotz der kleinen Bauform einen sehr voluminösen Klang, den man diesen Regal-Lautsprechner nicht ansieht. Die Anlage hat nach fast 40 Jahren ein paar Gebrauchspuren, aber keine Dellen, Abbrüche oder tiefe Kratzer. Ich würde sie immer noch als Wohnzimmertauglich bezeichnen. Bitte sehen Sie sich die Bilder an und stellen Sie gern Fragen. Der Versand erfolgt auf Grund des Gewichts ggf in mehreren Einzelkartons via UPS. Noch das Rechtliche: dies ist ein Privatverkauf, daher keine Rücknahme und/oder Garantie. Bitte schauen Sie sich auch meine weiteren B&O Geräte an, die ich hier verkaufe.

BEOMASTER 5000 + BEOGRAM CD 6500 + BEOCORD 6500 + MPC5000Beomaster 5000 Tuner/Amplifier 5000 MCP remoteTested and fully working, great sound quality from a classic vintage B&O. Probably the best built in preamp. BeoGram 5000. Comes with a MMC5 cartridge in excellent condition and which sounds amazing. BeoGram CD 6500. New capacitors fitted to the CDm Disc Drive Servo and New Tray Belt fitted. Beocord 6500Tape cleaned and lubricated and New Belt fitted, plus a New Tray Belt fitted. Cosmetically in great condition, some stacking marks due to age. Please review the photos. Pickup is most welcome. THE FOLLOWING IS COURTESY OF BEOWORLDBeoMaster 5000 Tuner/AmplifieManufactured: 1983 - 1986Designer: Jacob JensenColours: AluminiumLong, medium and FM wavebands were featured on this high-technology 2 x 55 watts receiver that served as the heart of Beosystem 5000 introduced in 1983.A frequency-synthesized tuner with automatic fine tuning and two-speed manual drive all contributed to fast, accurate location of radio programmes and superb reception quality. Nine station frequencies (on any combination of wavebands) could be stored in the Beomasters microcomputer memory for instant recall.The low-distortion stereo amplifier included a very advanced feature, unique to Bang & Olufsen: Automatic Power Handling Control. This special circuit continuously monitored the dynamic range and power of the signal and instructed the microcomputer to decrease volume if the combined effects of these two parameters threatened to cause amplifier clipping or damage to the speakers. This type of overload became increasingly common since the introduction of the Compact Disc, which can produce signals of enormous dynamic range, but it could not occur in Beomaster 5000.An internal, variable-speed fan ensured the proper dissipation of heat, even when the Beomaster was used in a stack format. Direct operation of all primary functions was available on the Beomaster itself should the Master Control Panel not be to hand. These controls were located beneath a hinged cover which sprang open at a touchBeomaster 5000 had no visible controls. Normal operation was by means of the Master Control Panel - a slim, table-top keypad that gave chair-side access to all functions including microcomputer programming and storage, timer facilities, status check, day and clock display, volume, tone and stereo balance adjustments and control of all sound sources. A programme-sequencing facility allowed you to pre-plan a whole evenings listening composed of record, radio and cassette music in any order and combination. Once set, this command performance would play continuously as instructed without further use of the controlsBeoGram 5000 Record DeckManufactured: 1983 - 1986Designer: Jacob JensenColours: AluminiumBeogram 5000s radial-tracking record deck was the perfect match for Beomaster 5000. Operation was entirely automatic. One touch on the PLAY control started the motor and activated the decks logic circuits which assessed the size and correct speed of the record and instructed the arm to lower the stylus into the run-in groove. This was a very fast-acting yet highly accurate control system which gave you music within about 8 seconds - far more quickly and gently than the human hand could guarantee. This system was also error-proof; for example, it was impossible to lower the stylus unless there was a record on the turntable, so expensive mistakes and accidents just couldnt happen.BeoGram CD6500 Compact Disc PlayerManufactured: 1989 - 1992Designer: Jacob JensenColours: Silver, Black, Whitef you wanted to indulge yourself with the finest sound quality then youd do no better than listening to your favourite pieces of music on Bang & Olufsens Beogram CD 6500. Beogram CD 6500 was a replacement for its predecessor, Beogram CD 5500.It played both 12cm and 8cm compact discs, and housed sophisticated and advanced digital technology. And it offered sound reproduction which would satisfy even the most demanding of listeners.BeoCord 6500 Cassette DeckManufactured: 1989 - 1991Designer: Jacob JensenColours: Aluminium, WhiteA light touch to the front of the Beocord 6500 cassette recorder released the loader which glided out slowly and silently in order to allow you to insert a cassette. You could use whichever type of cassette you prefer; or choose between Dolby B or C Noise Reduction systems... and rejoice in Bang & Olufsens patented HX-PRO recording system which ensured optimal sound reproduction, particularly in the difficult, high-frequency range. And, naturally, Beocord 6500 had auto-reverse so that both sides of the tape played as one. Beocord 6500 could be used as part of the Beosystem 6500hi-fi system. Auto Record level One of the less-pleasant chores in making a recording is setting level control to its optimum position. Setting it too low raises the level of background noise on the recording. Setting it too high makes the recording distorted at high music levels. With this in mind, Bang and Olufsen introduced an automatic record mode which was called Auto Record. Auto Record worked in two steps: when the record button was pressed for the first time, the cassette recorder went into a record pause mode, where the incoming signal was monitored. Under microprocessor control, the highest level was monitored and the record level was set at the optimum level for that music. On pressing the record button the second time, the tape was set in motion and the recording started, but continuing to make minor adjustments. If at any time during the recording, the level of music rose above the monitored level, the level control was lowered by exactly the amount required for the new optimum recording level. This method of setting the level control closely imitated the action of a highly skilled recording engineer, if asked to set the level for a recording. It was the best that could be done when the full recording could not be monitored before recording started. This feature incorporated a new method of monitoring the signal, which proved to be a more effective method over conventional methods. It was patented by the company with the patent number 158702.Master Control Panel 5000Manufactured: 1983 - 1987Designer: Jacob JensenColours: Silver, GreyThe main remote control for the Beosystem 5000, the MCP 5000 allowed full control of your Beosystem from your armchair. Two way control allowed the status of the system to be ascertained easily and complex timer programming was possible using the controls under the flip down panel.

BEOMASTER 5000 + BEOGRAM CD 6500 + BEOCORD 6500 + MPC5000Beomaster 5000 Tuner/Amplifier 5000 MCP remoteTested and fully working, great sound quality from a classic vintage B&O. Probably the best built in preamp. BeoGram 5000. Comes with a MMC5 cartridge in excellent condition and which sounds amazing. BeoGram CD 6500. New capacitors fitted to the CDm Disc Drive Servo and New Tray Belt fitted. Beocord 6500Tape cleaned and lubricated and New Belt fitted, plus a New Tray Belt fitted. Cosmetically in great condition, some stacking marks due to age. Please review the photos. Pickup is most welcome. THE FOLLOWING IS COURTESY OF BEOWORLDBeoMaster 5000 Tuner/AmplifieManufactured: 1983 - 1986Designer: Jacob JensenColours: AluminiumLong, medium and FM wavebands were featured on this high-technology 2 x 55 watts receiver that served as the heart of Beosystem 5000 introduced in 1983.A frequency-synthesized tuner with automatic fine tuning and two-speed manual drive all contributed to fast, accurate location of radio programmes and superb reception quality. Nine station frequencies (on any combination of wavebands) could be stored in the Beomasters microcomputer memory for instant recall.The low-distortion stereo amplifier included a very advanced feature, unique to Bang & Olufsen: Automatic Power Handling Control. This special circuit continuously monitored the dynamic range and power of the signal and instructed the microcomputer to decrease volume if the combined effects of these two parameters threatened to cause amplifier clipping or damage to the speakers. This type of overload became increasingly common since the introduction of the Compact Disc, which can produce signals of enormous dynamic range, but it could not occur in Beomaster 5000.An internal, variable-speed fan ensured the proper dissipation of heat, even when the Beomaster was used in a stack format. Direct operation of all primary functions was available on the Beomaster itself should the Master Control Panel not be to hand. These controls were located beneath a hinged cover which sprang open at a touchBeomaster 5000 had no visible controls. Normal operation was by means of the Master Control Panel - a slim, table-top keypad that gave chair-side access to all functions including microcomputer programming and storage, timer facilities, status check, day and clock display, volume, tone and stereo balance adjustments and control of all sound sources. A programme-sequencing facility allowed you to pre-plan a whole evenings listening composed of record, radio and cassette music in any order and combination. Once set, this command performance would play continuously as instructed without further use of the controlsBeoGram 5000 Record DeckManufactured: 1983 - 1986Designer: Jacob JensenColours: AluminiumBeogram 5000s radial-tracking record deck was the perfect match for Beomaster 5000. Operation was entirely automatic. One touch on the PLAY control started the motor and activated the decks logic circuits which assessed the size and correct speed of the record and instructed the arm to lower the stylus into the run-in groove. This was a very fast-acting yet highly accurate control system which gave you music within about 8 seconds - far more quickly and gently than the human hand could guarantee. This system was also error-proof; for example, it was impossible to lower the stylus unless there was a record on the turntable, so expensive mistakes and accidents just couldnt happen.BeoGram CD6500 Compact Disc PlayerManufactured: 1989 - 1992Designer: Jacob JensenColours: Silver, Black, Whitef you wanted to indulge yourself with the finest sound quality then youd do no better than listening to your favourite pieces of music on Bang & Olufsens Beogram CD 6500. Beogram CD 6500 was a replacement for its predecessor, Beogram CD 5500.It played both 12cm and 8cm compact discs, and housed sophisticated and advanced digital technology. And it offered sound reproduction which would satisfy even the most demanding of listeners.BeoCord 6500 Cassette DeckManufactured: 1989 - 1991Designer: Jacob JensenColours: Aluminium, WhiteA light touch to the front of the Beocord 6500 cassette recorder released the loader which glided out slowly and silently in order to allow you to insert a cassette. You could use whichever type of cassette you prefer; or choose between Dolby B or C Noise Reduction systems... and rejoice in Bang & Olufsens patented HX-PRO recording system which ensured optimal sound reproduction, particularly in the difficult, high-frequency range. And, naturally, Beocord 6500 had auto-reverse so that both sides of the tape played as one. Beocord 6500 could be used as part of the Beosystem 6500hi-fi system. Auto Record level One of the less-pleasant chores in making a recording is setting level control to its optimum position. Setting it too low raises the level of background noise on the recording. Setting it too high makes the recording distorted at high music levels. With this in mind, Bang and Olufsen introduced an automatic record mode which was called Auto Record. Auto Record worked in two steps: when the record button was pressed for the first time, the cassette recorder went into a record pause mode, where the incoming signal was monitored. Under microprocessor control, the highest level was monitored and the record level was set at the optimum level for that music. On pressing the record button the second time, the tape was set in motion and the recording started, but continuing to make minor adjustments. If at any time during the recording, the level of music rose above the monitored level, the level control was lowered by exactly the amount required for the new optimum recording level. This method of setting the level control closely imitated the action of a highly skilled recording engineer, if asked to set the level for a recording. It was the best that could be done when the full recording could not be monitored before recording started. This feature incorporated a new method of monitoring the signal, which proved to be a more effective method over conventional methods. It was patented by the company with the patent number 158702.Master Control Panel 5000Manufactured: 1983 - 1987Designer: Jacob JensenColours: Silver, GreyThe main remote control for the Beosystem 5000, the MCP 5000 allowed full control of your Beosystem from your armchair. Two way control allowed the status of the system to be ascertained easily and complex timer programming was possible using the controls under the flip down panel.

BEOMASTER 5000 + BEOGRAM CD 6500 + BEOCORD 6500 + MPC5000Beomaster 5000 Tuner/Amplifier 5000 MCP remoteTested and fully working, great sound quality from a classic vintage B&O. Probably the best built in preamp. BeoGram 5000. Comes with a MMC5 cartridge in excellent condition and which sounds amazing. BeoGram CD 6500. New capacitors fitted to the CDm Disc Drive Servo and New Tray Belt fitted. Beocord 6500Tape cleaned and lubricated and New Belt fitted, plus a New Tray Belt fitted. Cosmetically in great condition, some stacking marks due to age. Please review the photos. Pickup is most welcome. THE FOLLOWING IS COURTESY OF BEOWORLDBeoMaster 5000 Tuner/AmplifieManufactured: 1983 - 1986Designer: Jacob JensenColours: AluminiumLong, medium and FM wavebands were featured on this high-technology 2 x 55 watts receiver that served as the heart of Beosystem 5000 introduced in 1983.A frequency-synthesized tuner with automatic fine tuning and two-speed manual drive all contributed to fast, accurate location of radio programmes and superb reception quality. Nine station frequencies (on any combination of wavebands) could be stored in the Beomasters microcomputer memory for instant recall.The low-distortion stereo amplifier included a very advanced feature, unique to Bang & Olufsen: Automatic Power Handling Control. This special circuit continuously monitored the dynamic range and power of the signal and instructed the microcomputer to decrease volume if the combined effects of these two parameters threatened to cause amplifier clipping or damage to the speakers. This type of overload became increasingly common since the introduction of the Compact Disc, which can produce signals of enormous dynamic range, but it could not occur in Beomaster 5000.An internal, variable-speed fan ensured the proper dissipation of heat, even when the Beomaster was used in a stack format. Direct operation of all primary functions was available on the Beomaster itself should the Master Control Panel not be to hand. These controls were located beneath a hinged cover which sprang open at a touchBeomaster 5000 had no visible controls. Normal operation was by means of the Master Control Panel - a slim, table-top keypad that gave chair-side access to all functions including microcomputer programming and storage, timer facilities, status check, day and clock display, volume, tone and stereo balance adjustments and control of all sound sources. A programme-sequencing facility allowed you to pre-plan a whole evenings listening composed of record, radio and cassette music in any order and combination. Once set, this command performance would play continuously as instructed without further use of the controlsBeoGram 5000 Record DeckManufactured: 1983 - 1986Designer: Jacob JensenColours: AluminiumBeogram 5000s radial-tracking record deck was the perfect match for Beomaster 5000. Operation was entirely automatic. One touch on the PLAY control started the motor and activated the decks logic circuits which assessed the size and correct speed of the record and instructed the arm to lower the stylus into the run-in groove. This was a very fast-acting yet highly accurate control system which gave you music within about 8 seconds - far more quickly and gently than the human hand could guarantee. This system was also error-proof; for example, it was impossible to lower the stylus unless there was a record on the turntable, so expensive mistakes and accidents just couldnt happen.BeoGram CD6500 Compact Disc PlayerManufactured: 1989 - 1992Designer: Jacob JensenColours: Silver, Black, Whitef you wanted to indulge yourself with the finest sound quality then youd do no better than listening to your favourite pieces of music on Bang & Olufsens Beogram CD 6500. Beogram CD 6500 was a replacement for its predecessor, Beogram CD 5500.It played both 12cm and 8cm compact discs, and housed sophisticated and advanced digital technology. And it offered sound reproduction which would satisfy even the most demanding of listeners.BeoCord 6500 Cassette DeckManufactured: 1989 - 1991Designer: Jacob JensenColours: Aluminium, WhiteA light touch to the front of the Beocord 6500 cassette recorder released the loader which glided out slowly and silently in order to allow you to insert a cassette. You could use whichever type of cassette you prefer; or choose between Dolby B or C Noise Reduction systems... and rejoice in Bang & Olufsens patented HX-PRO recording system which ensured optimal sound reproduction, particularly in the difficult, high-frequency range. And, naturally, Beocord 6500 had auto-reverse so that both sides of the tape played as one. Beocord 6500 could be used as part of the Beosystem 6500hi-fi system. Auto Record level One of the less-pleasant chores in making a recording is setting level control to its optimum position. Setting it too low raises the level of background noise on the recording. Setting it too high makes the recording distorted at high music levels. With this in mind, Bang and Olufsen introduced an automatic record mode which was called Auto Record. Auto Record worked in two steps: when the record button was pressed for the first time, the cassette recorder went into a record pause mode, where the incoming signal was monitored. Under microprocessor control, the highest level was monitored and the record level was set at the optimum level for that music. On pressing the record button the second time, the tape was set in motion and the recording started, but continuing to make minor adjustments. If at any time during the recording, the level of music rose above the monitored level, the level control was lowered by exactly the amount required for the new optimum recording level. This method of setting the level control closely imitated the action of a highly skilled recording engineer, if asked to set the level for a recording. It was the best that could be done when the full recording could not be monitored before recording started. This feature incorporated a new method of monitoring the signal, which proved to be a more effective method over conventional methods. It was patented by the company with the patent number 158702.Master Control Panel 5000Manufactured: 1983 - 1987Designer: Jacob JensenColours: Silver, GreyThe main remote control for the Beosystem 5000, the MCP 5000 allowed full control of your Beosystem from your armchair. Two way control allowed the status of the system to be ascertained easily and complex timer programming was possible using the controls under the flip down panel.