MONITOR - AUDIO - BRONZE CENTRE SPEAKER Only selling due to lack of space in new flat for dedicated hi-fi. Monitor Audio Centre in walnut, works perfectly. Comes with box, instructions, allen key and removable grille On the last picture you can see a very small chip/dent at the near the back of the speakers left side. In use this is unnoticeable and I had to zoom in 3x to produce a photo where it’s clearly visible. All 4 rubber feet are included and attached, however, I’ve noticed whilst boxing it up, that the stickiness on one is fading. I’ve firmly pressed it on but be careful when unboxing as it may be dislodged again. If necessary these can be replaced for pennies.

Superb Monitor Audio Bronze BR-LCR Centre Speaker.....fantastic sound....complete with grille.....a few tiny chips/dinks in the cabinet on this one, as per the photos....hence the price..... For the BRLCR, weve demolished the limitations of entry-level design by creating a speaker that not only reproduces voice with unfailing accuracy, but extends this performance to accommodate bass frequencies as well. Description Specification Downloads This means the BRLCR will perform brilliantly as a centre and surround speaker, underpinned by the BRW10 subwoofer. Its system of twin 5 1/2 MMPII drivers, 1 C-CAMtweeter and upgraded crossover matches perfectly with the system architecture of other BR series speakers for pin-point imaging at any location. Technology Versatile 2-way loudspeaker perfect for on-wall applications, stereo or surround. Dual 5 1/2 MMPII drivers and single 1 C-CAMtweeter are pitched perfectly for accurate dialogue. Acoustically matched with all other BR loudspeakers for precise surround sound imaging and consistent timbre front to back. Frequency Response 60 Hz - 30 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 6 Ohms Power Handling (RMS) 120 W Recommended Amplifier Requirements 20 - 120 W Cabinet Support Sealed Cabinet Drive Unit Complement 2 x 5.5 MMPII Bass mid-range 1 x 1 (25 mm) gold dome C-CAMtweeter External Dimensions (H x W x D) 165 x 460 x 165 mm (61/2x 181/8x 61/2inch) Weight (each) 6 kg (13.2 lb) Collection from Middleton, Manchester is an option.....

Superb Monitor Audio Bronze BR-LCR Centre Speaker......in a light Oak-type finish....no flaws....sound superb....complete with grille.... Frequency Response 60 Hz - 30 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 6 Ohms Power Handling (RMS) 120 W Recommended Amplifier Requirements 20 - 120 W Cabinet Support Sealed Cabinet Drive Unit Complement 2 x 5.5 MMPII Bass mid-range 1 x 1 (25 mm) gold dome C-CAMtweeter External Dimensions (H x W x D) 165 x 460 x 165 mm (61/2x 181/8x 61/2inch) Weight (each) 6 kg (13.2 lb) For the BRLCR, weve demolished the limitations of entry-level design by creating a speaker that not only reproduces voice with unfailing accuracy, but extends this performance to accommodate bass frequencies as well. Description Specification Downloads This means the BRLCR will perform brilliantly as a centre and surround speaker, underpinned by the BRW10 subwoofer. Its system of twin 5 1/2 MMPII drivers, 1 C-CAMtweeter and upgraded crossover matches perfectly with the system architecture of other BR series speakers for pin-point imaging at any location. Technology Versatile 2-way loudspeaker perfect for on-wall applications, stereo or surround. Dual 5 1/2 MMPII drivers and single 1 C-CAMtweeter are pitched perfectly for accurate dialogue. Acoustically matched with all other BR loudspeakers for precise surround sound imaging and consistent timbre front to back....... I have two of these listed....collection from Middleton, Manchester would be preferred, but would also post....

MONITOR - AUDIO - BRONZE CENTRE SPEAKER. Used, good condition, sale due to upgrade.

Superb Monitor Audio Bronze BR-LCR Centre Speaker.....fantastic sound....complete with grille.....a few tiny chips/dinks in the cabinet on this one, as per the photos....hence the price..... For the BRLCR, weve demolished the limitations of entry-level design by creating a speaker that not only reproduces voice with unfailing accuracy, but extends this performance to accommodate bass frequencies as well. Description Specification Downloads This means the BRLCR will perform brilliantly as a centre and surround speaker, underpinned by the BRW10 subwoofer. Its system of twin 5 1/2 MMPII drivers, 1 C-CAMtweeter and upgraded crossover matches perfectly with the system architecture of other BR series speakers for pin-point imaging at any location. Technology Versatile 2-way loudspeaker perfect for on-wall applications, stereo or surround. Dual 5 1/2 MMPII drivers and single 1 C-CAMtweeter are pitched perfectly for accurate dialogue. Acoustically matched with all other BR loudspeakers for precise surround sound imaging and consistent timbre front to back. Frequency Response 60 Hz - 30 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 6 Ohms Power Handling (RMS) 120 W Recommended Amplifier Requirements 20 - 120 W Cabinet Support Sealed Cabinet Drive Unit Complement 2 x 5.5 MMPII Bass mid-range 1 x 1 (25 mm) gold dome C-CAMtweeter External Dimensions (H x W x D) 165 x 460 x 165 mm (61/2x 181/8x 61/2inch) Weight (each) 6 kg (13.2 lb) Collection from Middleton, Manchester is an option.....

Superb Monitor Audio Bronze BR-LCR Centre Speaker......in a light Oak-type finish....no flaws....sound superb....complete with grille.... Frequency Response 60 Hz - 30 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 6 Ohms Power Handling (RMS) 120 W Recommended Amplifier Requirements 20 - 120 W Cabinet Support Sealed Cabinet Drive Unit Complement 2 x 5.5 MMPII Bass mid-range 1 x 1 (25 mm) gold dome C-CAMtweeter External Dimensions (H x W x D) 165 x 460 x 165 mm (61/2x 181/8x 61/2inch) Weight (each) 6 kg (13.2 lb) For the BRLCR, weve demolished the limitations of entry-level design by creating a speaker that not only reproduces voice with unfailing accuracy, but extends this performance to accommodate bass frequencies as well. Description Specification Downloads This means the BRLCR will perform brilliantly as a centre and surround speaker, underpinned by the BRW10 subwoofer. Its system of twin 5 1/2 MMPII drivers, 1 C-CAMtweeter and upgraded crossover matches perfectly with the system architecture of other BR series speakers for pin-point imaging at any location. Technology Versatile 2-way loudspeaker perfect for on-wall applications, stereo or surround. Dual 5 1/2 MMPII drivers and single 1 C-CAMtweeter are pitched perfectly for accurate dialogue. Acoustically matched with all other BR loudspeakers for precise surround sound imaging and consistent timbre front to back....... I have two of these listed....collection from Middleton, Manchester would be preferred, but would also post....

MONITOR - AUDIO - BRONZE CENTRE SPEAKER. Used, good condition, sale due to upgrade.

Superb Monitor Audio Bronze BR-LCR Centre Speaker.....fantastic sound....complete with grille.....a few tiny chips/dinks in the cabinet on this one, as per the photos....hence the price..... For the BRLCR, weve demolished the limitations of entry-level design by creating a speaker that not only reproduces voice with unfailing accuracy, but extends this performance to accommodate bass frequencies as well. Description Specification Downloads This means the BRLCR will perform brilliantly as a centre and surround speaker, underpinned by the BRW10 subwoofer. Its system of twin 5 1/2 MMPII drivers, 1 C-CAMtweeter and upgraded crossover matches perfectly with the system architecture of other BR series speakers for pin-point imaging at any location. Technology Versatile 2-way loudspeaker perfect for on-wall applications, stereo or surround. Dual 5 1/2 MMPII drivers and single 1 C-CAMtweeter are pitched perfectly for accurate dialogue. Acoustically matched with all other BR loudspeakers for precise surround sound imaging and consistent timbre front to back. Frequency Response 60 Hz - 30 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 6 Ohms Power Handling (RMS) 120 W Recommended Amplifier Requirements 20 - 120 W Cabinet Support Sealed Cabinet Drive Unit Complement 2 x 5.5 MMPII Bass mid-range 1 x 1 (25 mm) gold dome C-CAMtweeter External Dimensions (H x W x D) 165 x 460 x 165 mm (61/2x 181/8x 61/2inch) Weight (each) 6 kg (13.2 lb) Collection from Middleton, Manchester is an option.....

Superb Monitor Audio Bronze BR-LCR Centre Speaker......in a light Oak-type finish....no flaws....sound superb....complete with grille.... Frequency Response 60 Hz - 30 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 6 Ohms Power Handling (RMS) 120 W Recommended Amplifier Requirements 20 - 120 W Cabinet Support Sealed Cabinet Drive Unit Complement 2 x 5.5 MMPII Bass mid-range 1 x 1 (25 mm) gold dome C-CAMtweeter External Dimensions (H x W x D) 165 x 460 x 165 mm (61/2x 181/8x 61/2inch) Weight (each) 6 kg (13.2 lb) For the BRLCR, weve demolished the limitations of entry-level design by creating a speaker that not only reproduces voice with unfailing accuracy, but extends this performance to accommodate bass frequencies as well. Description Specification Downloads This means the BRLCR will perform brilliantly as a centre and surround speaker, underpinned by the BRW10 subwoofer. Its system of twin 5 1/2 MMPII drivers, 1 C-CAMtweeter and upgraded crossover matches perfectly with the system architecture of other BR series speakers for pin-point imaging at any location. Technology Versatile 2-way loudspeaker perfect for on-wall applications, stereo or surround. Dual 5 1/2 MMPII drivers and single 1 C-CAMtweeter are pitched perfectly for accurate dialogue. Acoustically matched with all other BR loudspeakers for precise surround sound imaging and consistent timbre front to back....... I have two of these listed....collection from Middleton, Manchester would be preferred, but would also post....

Monitor Audio Bronze Centre Speaker White Ash. Some slight dents to the speaker cones but doesnt affect sound quality, tweeter is pristine. (Please check pictures) No marks on the cabinet, a few marks on the grille cover but will clean off. Sounds amazing, only selling due to upgrade, any questions please ask Specs are; System Format 2-Way Frequency Response 60 Hz 30 kHz Nominal Impedance 8 ohms Maximum SPL 113 dBA Power Handling (RMS) 120 W Recommended Amplifier Requirements 20 120 W Cabinet Design Sealed Cabinet Drive Unit Complement 2 x 51/2C-CAMbass mid-range driver. 1 x 25 mm C-CAMGold Dome tweeter Crossover Frequency 3.0kHz Cabinet Dimensions (H x W x D) 165 x 460 x 165 mm (61/2x 181/8x 61/2) Dimensions (Including Grille and Terminals (H x W x D)) 165 x 460 x 193 mm (61/2x 181/8x 75/8) Weight (each) 5.6 kg (12 lb6 oz)

MONITOR AUDIO - Bronze Center Speaker with the favourite walnut finish. Owned from new, excellent condition and boxed. I have upgraded to Monitor Audio silver all round, so now surplus to requirements. This is a superb speaker for surround sound/Dolby Atmos with a beautiful finish and a punchy sound. Heavy, so collection preferred, but Parcel force tracked postage available.

MONITOR - AUDIO - BRONZE SERIES CENTRE SPEAKER Boxed Excellent Condition. Cabinet and Grille clean, unmarked