Project Phono Box E Phono Preamplifier - Great Condition Pro-Ject. Used with a set of powered speakers as my turntable did not have a built in preamplifier. In great condition. Case has minor surface scratches.

Pro-ject Audio Phono Box S Pre-amplifier for vinyl records turntable etc. The analogue output of Phono Box connects to your line-in (AUX). Brushed aluminium faceplate - no black. Tested working. Same day dispatch, first class, FREE. Technical SpecificationsInput impedance, MM: 47 kohms/120 pFInput impedance, MC: 100 ohms / 120 pFGain, MM: 40 dBOutput voltage typically: 300 mV/1 kHz at 3 mV/1 kHz (MM input)Gain, MC: 60 dBOutput voltage typically: 300 mV / 1 kHz at 0,3mV/1 kHz (MC input)Max. output: 9.5V (1kHz)Noise floor, MM: 94 dBANoise floor, MC: 75 dBATHD, MM: 0,01%THD, MC: 0,05%RIAA-equalisation curve accuracy: 20 Hz - 20 kHz / max. 0,5 dBOutboard power supply: 18V / 200 mA DC, suitable for your countrys mains supplyStandby power consumption: < 1 wattsDimensions W x H x D: 103 x 36 x 104 (115 mm with sockets)Weight: 570 gFeaturesPreamplifier for MM or MC with switch on rear panelBest buy classicDC power supply (< 1 watt standby power)Precise RIAA equalisationLow noise ICsOutput stage with ultra-low impedanceGold-plated RCA socketsSmall size for installation near recordplayerFaceplate available in black and silver

PRO-JECT TUBE BOX S2Vacuum tube phono stage Comes with the original power adapter with UK and euro ends, the original pair of matched ECC83 tubes, box and all paperwork. Physical condition is excellent please see photos Selling due to personal preference for solid state, however still an excellent phono stage for tube fans. The tubes have around 50 hours (ballpark) of use, they still have heaps of life left in them but can also be easily rolled to your liking. Suitable for both MM and MC carts with dip switches on the bottom and front panel buttons for various capacitance and gain settings. Spec copied from Pro-Ject website:Tubes2 x ECC83 (12AX 7A)Input impedance10 ohms, 100 ohms, 1 kohm, 2 kohmsInput capacitance/impedance47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!Input gain40 dB, 43 dB / 50 dB, 60 dB und 63 dBNoise floor80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gainTHD<0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gainRIAA-equalisation curve accuracy+/- 0.4 dB/20 Hz - 20 kHzSubsonic filterat 20 Hz with 18 dB/octaveInput1 pair RCA/phono socketsLine-level output1 pair RCA/phono socketsOutboard power supply18 V / 1.000 mA DC, suitable for your countrys mains supplyPower consumption470 mA DC, <1W in standbyDimensions W x H x D with sockets103 x 73 x 131 mmWeight410 g without power supply Shipped with Royal Mail special delivery, next day delivery and fully insured for both of our peace of mind Please dont hesitate to get in touch with any questionsThanks

Project Phono Box E Phono Preamplifier - Pro-Ject. Bought brand new, opened but never used as I bought a new turntable that didn’t need it Posted in a separate box securely

Normal 0 false false false RU X-NONE X-NONE Normal 0 false false false RU X-NONE X-NONE Welcome to bid for Premium Power Supply Unit for PRO-JECT Dacs, Phono Preamps and TubeBoxes (S, DS, DS + and DS2 Families)This is high quality power supply for audio applications designed especially for use with Pr--Ject devices.The PSU provides highly stable and purified 18V DC power, exactly as specified for these audio gears Available with black anodized aluminium front panel as shown in pictures.This psu is to be supplied with a 60 cm DC cable to connect a Pro-Ject item, if you like another length and mains cable to be sent with the psu please let us know. PLEASE CONTACT VIA MESSENGER IF YOU ARE ABOUT POWER SUPPLY FOR models other than shown in pictures PSU presented in the auction built with the best quality components dedicated to high class audio and provides higher output current ceiling that the original wall adaptor and improves sonic performance of the devices. Sonic effect is more transparent and pleasant to hear sound, deep and persuasive bass range, totally undistorted vocal range and accurate, airy treble. Please note that this is not an universal power supply, like many distributed from Hong Kong, but designed and dedicated to use in audio.Its design is matched to Pro-Ject items both electronically and aestetically how you can see in our example pictures. Please ask if you are in doubt relating suitability of this PSU with your particular item.Please note that Tubebox shown in pictures as example of use are not included to this auction, This auction is for one power supply unit and one cable for it only (65 cm, 5 mm DC plug)Longer DC cable is available and a kettle type mains cable can be added if you need one, just let me know. We combine shipments, just ask if you buy more than one item. In particular, any cable presented in our auctions, if purchased, will be sent with this item without extra postage. Please, note that we ship in 5 days after he payment is cleared, please allow some extra time for delivery. Attention of International bidders: we will be pleased to ship worldwide. Shipping cost of £28 quoted is initial estimation for EU only.Overseas delivery could cost from £33 (USA, China) to £39(Australia, South America) We charge an actual minimal for international shipment, please, ask for quotation before bidding to be sure. Please, note that overseas delivery can take up to 12 working days. Item is fully tested and return is accepted within 2 week after delivery and exclusively in shape as it was shipped, i.e. perfect working condition. In this case 100% of auction price and shipment cost will be refunded. Return of nonworking, damaged or scratched item is not accepted and will be not refunded. Return shipment cost is on Buyer’s side. We combine shipments, every second item won by the same bidder will be sent in one package with the first one at postage rate for the one (heavy) item only. Pleas note that we ship in 4-5 days after the payment is cleared, please allow some extra time for delivery

Used and in very good working condition The perfect way to add a turntable to your incompatible hi-fi system, the Pro-Ject Phono Box MM combines quality and value to great effect. Low-noise components, high-quality sound Using selected low-noise integrated circuits, the Pro-Ject Phono Box MM gives an excellent signal-to-noise ratio. This means you hear more detail from the music and less background noise. For excellent sound staging, it also uses dual-mono circuitry. Usually only found in much more expensive amplifiers, this type of circuitry gives the purest balance of sound, while the outboard power supply further reduces the chances of electrical interference. Full metal jacket A full metal casing ensures the delicate electronics within are shielded from both mechanical and electrical interference. As a final audiophile touch, all the RCA phono sockets are gold-plated. A phono stage thats been built to last and still provide great value for money; the Pro-Ject Phono Box MM offers the ideal solution.

Project Phono Box E Phono Preamplifier - Not functioning. Last time I went to use it, I just couldnt get any sound through it. Not sure of the issue and it is out of warranty. Hopefully someone can repair it.