This Rotel RSP-1066 AV preamp/processor is a professional amp that comes highly recommended by Stereophile. It has a sleek black design and features 5.1 channels, 6 inputs, and 5 outputs for an optimal listening experience. The audio inputs include Coaxial Digital, Stereo L/R RCA, Pre Out, Multi-Channel RCA, and Optical Digital (Toslink). Additionally, it has audio outputs for RCA and Stereo L/R RCA. This Rotel model is perfect for those looking to elevate their home audio system. works great ships fast

I just re-designed my system with Mark Levinson hardware. This Rotel RSP-1066 worked flawless but it is time for you to enjoy it. Here is the specs for this wonderful unit. I used it with just two speakers but it is ready for your surround system as well. The supplied remote does volume and mute. It may do other things but that is what we programmed. Rotel RMB-1066 Home Theatre Six Channel Power Amplifier This Rotel Six Channel Power Amplifier has been fully tested and is in good working condition. Cosmetically this unit is in pristine condition! The RMB-1066 multi-channel power amplifier is an enormously flexible unit intended primarily for use in surround systems and delivers high power in a variety of configurations. The power supply and output circuits are configured for exceptional reserve capability and stability. In six channel mode, the RMB-1066 delivers 60 watts RMS each (20 Hz to 20 kHz @0.03%THD into 8 ohms). In five channel mode (one channel quiescent), power increases to 70 watts RMS each measured by the same demanding standards. Amplifier pairs can be bridged to develop 150 watts x 3 for almost half a kilowatt of output power. Three rear panel switches (one two-way and two three-way) make bridging easy and also link the inputs via internal daisy chain connections with a single source, thus simplifying system wiring. Input level controls, strategically placed between front panel heat sink fins and an extensive 6 LED indicator array ease system adjustment and monitoring. 12 volt trigger operation and a detachable IEC power cord directly address demanding custom installation requirements while custom brass speaker terminals provide full contact power transfer.

Rotel RSP 1066 Surround Sound Processor.Remote and Manufactures Box

Rotel RSP-1066 Surround Sound Processor / Preamplifier in black. Great piece of kit at a great price & a great additional add-on to your rotel pre & power set-up or any pre & power set-up or integrated amplifier. Has separate pre outputs for everything, front rear centre & 2 subs pre outputs. In very good condition & working order. Has some minor marks and scratches on top but nothing serious. No remote control, but power cable is included. Cheap as chips so grab a bargain!. Please see all photos as they form part of the description. Specifications Audio Section Surround modes: Dolby Pro Logic II, Dolby 3-, 5-, & 7-channel stereo, Dolby Digital, Dolby Digital EX, DTS, DTS-ES Matrix, DTS-ES Discrete, DTS Neo:6, Music DSP Analog inputs: 8 RCA line-level (2-channel), RCA (7-channel) Digital inputs: 3 coaxial, 2 TosLink Analog outputs: RCA L/R Front, Center 1,Center 2, L/R Rear, Center Back 1, Center Back 2, Sub 1, Sub 2, Zone 2 L/R, Tape, Video 1,2,3 Digital outputs: 1 coaxial, 1 TosLink Other connectors: COM I/O, Zone 2 remote, External remote, Dual12V trigger, Dual IR out Frequency response: 10Hz-95kHz, 1dB, line level; 10Hz-20kHz, 0.3dB, digital Signal/noise: 95dB (stereo analog), 92dB (Dolby Digital, DTS), both IHF A-weighted THD: <0.05% IM distortion: <0.05% Input sensitivity/impedance: 200mV/47k, line level Video Section Inputs: 5 composite, 5 S-video, 2 component Outputs: 4 composite, 4 S-video, 1 component Frequency response: 3Hz-10MHz, 3dB Signal/noise: 45dB Dimensions: 432 x 121 x 341mm (WxHxD) Weight: 16.7 lbs / 7.6kgs Pictures taken straight off storage unit so a bit dusty, i will give it a clean before posting. Item will be very well packed. Seller accepts no responsibility once posted. Sold as seen. UK bidders only. UK mainland only. Any questions feel free. Collection welcome. Buyer is welcome to arrange their own courier service (at buyers expense).

I just re-designed my system with Mark Levinson hardware. This Rotel RSP-1066 worked flawless but it is time for you to enjoy it. Here is the specs for this wonderful unit. I used it with just two speakers but it is ready for your surround system as well. The supplied remote does volume and mute. It may do other things but that is what we programmed. Rotel RMB-1066 Home Theatre Six Channel Power Amplifier This Rotel Six Channel Power Amplifier has been fully tested and is in good working condition. Cosmetically this unit is in pristine condition! The RMB-1066 multi-channel power amplifier is an enormously flexible unit intended primarily for use in surround systems and delivers high power in a variety of configurations. The power supply and output circuits are configured for exceptional reserve capability and stability. In six channel mode, the RMB-1066 delivers 60 watts RMS each (20 Hz to 20 kHz @0.03%THD into 8 ohms). In five channel mode (one channel quiescent), power increases to 70 watts RMS each measured by the same demanding standards. Amplifier pairs can be bridged to develop 150 watts x 3 for almost half a kilowatt of output power. Three rear panel switches (one two-way and two three-way) make bridging easy and also link the inputs via internal daisy chain connections with a single source, thus simplifying system wiring. Input level controls, strategically placed between front panel heat sink fins and an extensive 6 LED indicator array ease system adjustment and monitoring. 12 volt trigger operation and a detachable IEC power cord directly address demanding custom installation requirements while custom brass speaker terminals provide full contact power transfer.

Rotel RSP-1066 Surround Sound Processor / Preamplifier in black. Great piece of kit at a great price & a great additional add-on to your rotel pre & power set-up or any pre & power set-up or integrated amplifier. Has separate pre outputs for everything, front rear centre & 2 subs pre outputs. In very good condition & working order. Has some minor marks and scratches on top but nothing serious. No remote control, but power cable is included. Cheap as chips so grab a bargain!. Please see all photos as they form part of the description. Specifications Audio Section Surround modes: Dolby Pro Logic II, Dolby 3-, 5-, & 7-channel stereo, Dolby Digital, Dolby Digital EX, DTS, DTS-ES Matrix, DTS-ES Discrete, DTS Neo:6, Music DSP Analog inputs: 8 RCA line-level (2-channel), RCA (7-channel) Digital inputs: 3 coaxial, 2 TosLink Analog outputs: RCA L/R Front, Center 1,Center 2, L/R Rear, Center Back 1, Center Back 2, Sub 1, Sub 2, Zone 2 L/R, Tape, Video 1,2,3 Digital outputs: 1 coaxial, 1 TosLink Other connectors: COM I/O, Zone 2 remote, External remote, Dual12V trigger, Dual IR out Frequency response: 10Hz-95kHz, 1dB, line level; 10Hz-20kHz, 0.3dB, digital Signal/noise: 95dB (stereo analog), 92dB (Dolby Digital, DTS), both IHF A-weighted THD: <0.05% IM distortion: <0.05% Input sensitivity/impedance: 200mV/47k, line level Video Section Inputs: 5 composite, 5 S-video, 2 component Outputs: 4 composite, 4 S-video, 1 component Frequency response: 3Hz-10MHz, 3dB Signal/noise: 45dB Dimensions: 432 x 121 x 341mm (WxHxD) Weight: 16.7 lbs / 7.6kgs Pictures taken straight off storage unit so a bit dusty, i will give it a clean before posting. Item will be very well packed. Seller accepts no responsibility once posted. Sold as seen. UK bidders only. UK mainland only. Any questions feel free. Collection welcome. Buyer is welcome to arrange their own courier service (at buyers expense).