Vintage SAE MARK II Stereo Power Amplifier AND yes it works. This is a nice vintage amp. MSRP in 1968 was $400. High Bidder will own.. No Reserve Specs: Solid-state stereo or mono amplifier. Power output: 60Wpc into 8 ohms, >40Wpv into 16 ohms, both channels driven, 20Hz–20kHz; in mono mode, >100W into 8 ohms, >120W into 14 ohms, 20Hz–20kHz. IM distortion: <0.2% at rated output; <0,1% at lower levels. THD: <0.2% at rated output, <0.05% at lower levels. Frequency response: 20Hz–20kHz ±0.1dB; 3Hz–100kHz +0, –2dB. Power bandwidth: 8Hz–50kHz. Hum & noise: >110dB below 40 watts. Damping factor: >150. Stability: Unconditional with any type of load, or no load. Sensitivity: 1.0V in for 40 watts out (stereo) or for 120 watts out (mono).Dimensions: 15 W by 12 D by 4 H. Shipping weight: 30 lbs.Price: $400 (1968); no longer available (2016).

VINTAGE SAE MARK 1 STEREO PREAMPLIFIER EQUALIZER. This one is tested and working. I will be well packaged and insured. High bidder will own cientific Audio Electronics, began in 1968 with a partnership agreement between Ted Winchester, Morris Kessler and Beth Winchester. With some creative graphics done on a Bishop PC Board they divised the S.A.E. logo and they were off and running. The company 1st brought to market the legendary S.A.E. Mark Two power amplifier that dispite its rather utilitarian appearance, won many fans including a certain Gordon Holt of Sterophile Magazine. In a sea of Marantz, Pioneer and Sansui, the Mark Two stood out. It didnt have the transistor sound commonly associated with these other brands. Its was different, special and otherworldly in a totally unique way.Fast forward to 1975 and the S.A.E. Mark One preamp. With its step attenuator, discreat capacitor array, separate 2 channel EQ settings, output gain selectors & input for (2) turntables, the Mark One became the preamp of choice for the well heeled 70s audiophile set.

VINTAGE SAE MARK 1B STEREO PREAMPLIFIER EQUALIZER Tested Beautiful. Condition is Used. Shipped with FedEx Ground or FedEx Home Delivery.

Beautiful SAE Mark IX preamplifier that works great. The power supply was rebuilt with most of the parts replaced. The small power light in front was replaced with an led. Other than 4 electrolytic capacitors, the preamp section is all original. The wood case is in great condition but does have a few small marks on it. If you are unfamiliar with these, SAE designed them to have reduced power on at all times when the unit is plugged in, and full power with the power button pushed in. One minor issue is that a couple of the RCA plugs are just a tiny bit too small. Good quality tight fitting cables are highly recommended. All the slider controls were cleaned and work well. Some of the knobs arent perfectly straight though. Will be packed very well and shipped promptly. I also have a matching SAE power amp listed.

Hello and Welcome to our Online Vintage Audio Store ! You are buying just the 5 knobs pictured, the tuner picture is for reference ONLY !Knobs are sold as parts therefore NO Returns will be accepted. And now a couple of notes about us and our policies :) You will receive exactly what is pictured unless stated otherwise. Please understand that If we state in WORKING CONDITION does not mean the item has been fully restored and it does not mean the unit will not require future or near future repairs. Working Condition simply means that basic functions did work at the time we operated the unit and there were no signs of malfunction, unless specifically stated. We cannot guarantee factory specs and we cannot promise longevity of the unit. Original parts on these old items will eventually fail especially once put to consistent use and time is unknown. Buyer understands before making purchase vintage items are an investment and part of ownership is expecting to have costs in maintaining an item. SHIPPING TERMSWe do not ship outside of the lower 48 states or to PO Boxes, FPO, or APO addresses without the buyer requesting a quote before making purchase.We do International Shipping only with eBays Global Shipping Program. See details here: http://pages.ebay.com/help/sell/shipping-globally.htmlAll our items are guaranteed for 14 days unless sold on an AS IS basis or for Parts or Repair.

Tuner SAE Mark VII. Si accende Si sente Cambia stazione Lindicatore della frequenza rimane fisso

Vintage SAE Mark IXB Solid State Stereo Preamplifier Equalizer In Good Condition. Some small scratches but in overall good condition. Stock photo used, additional photos available by request. Great quality preamp, no DOA. No international shipments.Have not used for over 20 years. Been in closet with my Marantz 250 amp, Thorens 125 Mk2 turntable, KEF Speakers, Yamaha Amp, Yamaha CD player, and my SONY PS-X800 with a bio tracer arm. Time to let them all find good homes. :)

SAE MARK IlI C. Power Amplifier For Parts Or Repair Powers On Read. I am not a maintenance person and I do not know how to maintain. I only provide pictures. This item is sold as a part

Vintage SAE MARK XXX Solid State Stereo Preamplifier in Excellent Condition. Fully Functional. Comes with Original Box and Manual. 2 Feet replaced. power cord was frayed, and replaced. Sliders used fader lube. push buttons deoxed. Frequency response: 10Hz to 100kHzTotal harmonic distortion: 0.3%Gain: 58dB (MM), 16dB (line)Signal to noise ratio: 72dB (MM), 90dB (line)Output: 2.5V (Pre out), 9V (Pre out Max)Dimensions: 15 x 4.75 x 8 inchesWeight: 10lbshifi engine

Vintage SAE Mark IXB Solid State Stereo Preamplifier Equalizer In Good Condition. Some small scratches but in overall good condition. Stock photo used, additional photos available by request. Great quality preamp, no DOA. No international shipments.Have not used for over 20 years. Been in closet with my Marantz 250 amp, Thorens 125 Mk2 turntable, KEF Speakers, Yamaha Amp, Yamaha CD player, and my SONY PS-X800 with a bio tracer arm. Time to let them all find good homes. :)