I doubt you’ve seen a Sansui CA-F1 like this one. Honestly, this is the first time Ive seen one that is so beautiful and has all the extra content/accessories! All accessories are included, including the original box, warranty card, manual (copy), rack mount adapter, mounting bolts, and special tools! This CA-F1 looks like it was stored as part of a collection, not used. It sounds great and is the perfect match for Sansui power amps from the 1970s and 80s like the BA-F1, BA-2000, BA-3000, etc. The green power light works when the preamp powers up, all switches and controls work as they should with no extraneous noise. I will package it extremely well-protected (see my feedback as a seller) so it arrives to you safely. Note: I have an original wood case listed separately, willing to discuss package pricing if you’re interested. Note: if you want shipping to AK or HI, there will likely be a shipping surcharge - message me for details. Note: this is a 100v version, you’ll want to use a voltage adapter (easy to find and inexpensive).

Notice: The mount does not fit Samsung 32 in TVs ( with Mounting Holes Patterns 200x200) Articulating Swivel Tilt TV Monitor Wall Mount Bracket for most 19 20 22 23 24 26 28 29 inch LED LCD Flat Panel Screen TV or Monitor with Mounting Holes Patterns 100x100/75x75mm Post-installation level adjustment; Mounting Holes Patterns Plate Can be Taken Off Package included: 1 x Tilt Swivel TV Wall Mount Standard Mounting Hardware User Manual The articulating mount fits following Sansui models as well as other brands, some displays may not be listed (please check Mounting Holes Patterns and Weight): SLEDVD196 SLED1928 SLED1937 SLED1980 SLEDVD197 SLEDVD198 SLED2282 SLED2280 SLEDVD226 SLED2228 SLED2237 SLED2480 SLED2400 SLED2900 Product Specifications: Fits TV Size: most 17 to 27, some LED up to 29 TV or Monitor (please check Mounting Holes Patterns and Weight) Fits Mounting Holes Patterns: 100x100/75x75mm (4x4/3x3) Loading capacity: 44lbs Tilt: 5 degrees forward 5 degrees backward Swivel: 180°Rotate: 360° Extend out: up to 15 Nesting arm design retract to 2.4 for low profile application High quality steel construction with durable powder-coated finish Post-installation level adjustment for TV perfect level even after installed Removable Mounting Holes Patterns plate design: The Mounting Holes Patterns plate can be taken off for easy installation Single stud mounting supply quick and easy installation Does it fit my TV or monitor? First, the weight of the TV or monitor should be less than 44 lbs. Second, please find the 4 mounting holes on the back of the TV or monitor, and check the width and height. If they are one of below, then the mount will work perfect for your TV or monitor. 100x100mm (4x4) 75x75mm (3x3)Warning: This mount fits most 27 29 inch or above TVs.Note: Please help check, if your shipping address is not valid for USPS, please also provide PO box. Email Welcome to visit our store. Any problems please send us a message through the eBay messages system. Tax We are required to collect 8.25% sales tax when shipped to address in Texas. Shipping Most items are shipped in 1~2 business day after the payment was cleared. Tracking information will be sent to you later upon package shipped via email. We only ship to the shipping address that provided by Paypal. Please make sure your shipping address is correct and current. We are not responsible for any package lost due to wrong or undelivered addresses. For undeliverable or refused package, we will contact customers for re-shipment and customer is responsible for the actual shipping costs occurred. If there is damage during shipping, or wrong or missing item, please contact us within 72 hours of delivery, and keep all original package and content for investigation purpose. Extra shipping charge applies for heavy items shipped to PR, AK, HI, GU, AP, AE, MP, AS, please check carefully and agree to it before placing order. We are not responsible for the orders delay due to unpaid extra shipping charge for shipping to the above area. For heavy duty items, we will ship by UPS ground which require physical address. Please make sure you provide a physical address, not a P. O. box address. International customers are responsible for all custom duties and brokerage fees. Sorry, we do not offer combined shipping discount for auctions. Guarantee and Return policies Our return policy is 30 days return or exchange. Returns must be initiated by the customers within 30 days from the date of received package. Customers are responsible to check product compatibility issue. If you have questions about product please feel free to email us. In order to return an item you must contact us to request a Return Merchandise Authorization Number (RMA). All returns must obtain RMA# from us prior to returning the product. All returns must include all original items, original packaging, undamaged, unused and in re-saleable condition. We will refuse all items that are not in the conditions stated above and we are not responsible for sending back those items to you. Customers are responsible for return shipping costs. Shipping and handling fees are absolutely non-refundable. For free shipping items, the actual shipping cost occurred will be deducted from refund. If the order is not found to be defective and is as described there will be a 15% restocking fee. Our warranty does not apply to products that have been misused, modified, repaired or abused by anyone. We reserve the right as final authority on whether the products should be replaced or refunded. inkfrog terapeak

This is a Sansui CA-F1 preamplifier. It sounds great and is the perfect match for Sansui power amps from the 1970s and 80s like the BA-F1, BA-2000, BA-3000, etc. The green power light works when the amp powers up, all switches and controls work as they should with no extraneous noise. When I come across these, they usually have scratches on their tops from previous owners placing equipment on top of them. However, the top on this one is pretty clean. Speaking of tops: the Soundcrafstmen amp the CA-F1 is sitting on is shallow, only 11” deep, so the Sansui hangs off the back a few inches (it sits comfortably atop a normal-sized amp). I will package it extremely well-protected (see my feedback as a seller) so it arrives to you safely. I have an original wood case listed separately, willing to discuss package pricing if you’re interested. Note: if you want shipping to AK or HI, there will likely be a shipping surcharge - message me for details. Note: the amplifier shown underneath the CA-F1 is not included in this listing.Note: this is a 100v version, you’ll want to use a voltage adapter (easy to find and inexpensive).

Sansui AU-707 AU-717 Rack Integrated Stereo Verstärker 170 Wrms Vintage Good UvmDie Beschreibung dieses Artikels erfolgte durch automatische Übersetzung. Bei anstehenden Fragen, wenden Sie sich bitte an uns. SANSUI AU-707 AU-717 Integrierter Stereoverstärker 170 Watt RMS Vintage GUT AUSSEHEN Alles 100 % ORIGINAL Vom JAPANISCHEN MARKT, generalüberholt, FUNKTIONIERT perfekt mit 220/240 Volt Sansui AU-707 (AU-717) Stereo-Vollverstärker (1977-79) Beschreibung Der AU-707-Verstärker verfügt über ein fortschrittliches Designmerkmal, das eine extrem geringe inhärente transiente Intermodulationsverzerrung aufweist, wodurch negative Rückkopplungen (notwendig bei herkömmlichen Verstärkerdesigns, aber unerwünscht) auf das absolute Minimum reduziert werden. Auch das Design von Leistungsverstärkern weist eine Abkehr von der Tradition auf, was zur Eliminierung der Gleichstromdrift führt. Die differenzielle Push/Pull-Verstärkerstufe eliminiert Verzerrungen im offenen Regelkreis. Die Treiberstufe ist in 3-Stufen-Darlington-Schaltung ausgeführt. Spezifikationen Ausgangsleistung: 85 Watt pro Kanal in 8Ohm (Stereo) Frequenzgang: 20 Hz bis 20 kHz Gesamte harmonische Verzerrung: 0,025 % Dämpfungsfaktor: 60 Eingangsempfindlichkeit: 2,5 mV (MM), 150 mV (Line) Signal-Rausch-Verhältnis: 78 dB (MM), 100 dB (Leitung) Kanaltrennung: 60 dB (MM), 65 dB (Line) Ausgang: 150 mV (Line), 1 V (Vorverstärkerausgang) Lautsprecherlastimpedanz: 8Ohm (Minimum) Abmessungen: 430 x 168 x 389 mm Gewicht: 17,8 kg Jahr: 1978SANSUI AU-707 AU-717 Integrierter Stereoverstärker 170 Watt RMS Vintage GUT AUSSEHEN Vom JAPANISCHEN MARKT, generalüberholt, FUNKTIONIERT perfekt mit 220/240 Volt Der AU-707-Verstärker verfügt über ein fortschrittliches Designmerkmal, das eine extrem geringe inhärente transiente Intermodulationsverzerrung aufweist, wodurch negative Rückkopplungen (notwendig bei herkömmlichen Verstärkerdesigns, aber unerwünscht) auf das absolute Minimum reduziert werden. Auch das Design von Leistungsverstärkern weist eine Abkehr von der Tradition auf, was zur Eliminierung der Gleichstromdrift führt. Die differenzielle Push/Pull-Verstärkerstufe eliminiert Verzerrungen im offenen Regelkreis. Die Treiberstufe ist in 3-Stufen-Darlington-Schaltung ausgeführt. Signal-Rausch-Verhältnis: 78 dB (MM), 100 dB (Leitung Número de canales 2 Garantía del fabricante Sin garantía Tipo Amplificador integrado Potencia RMS 2 X 85 Watts RMS Color Negro EAN No aplicable Marca Sansui Entradas de audio Estéreo RCA Año de fabricación 1977 País/Región de fabricación Japón Cantidad de unidades 1 Tipo de unidad Unidad Salidas de audio Banana Jack Modelo AU-707 Potencia 2 X 85 Watts RMS

SANSUI AU-707 AU-717 Integrated Stereo Amplifier 170 Watts RMS Vintage GOOD LOOK All 100% ORIGINAL From JAPANESE MARKET, Refurbished, WORKING Perfect on 220/240 volts Sansui AU-707 (AU-717) Stereo Integrated Amplifier (1977-79) Description The AU-707 amplifier incorporates an advanced design feature which has extremely low inherent transient intermodulation distortion enabling negative feedback (necessary in traditional amplifier design but undesirable) to be reduced to the absolute minimum. Power amplifier design too, shows a departure from tradition resulting in the elimination of DC drift. Differential push/pull amplifier stage eliminates open-loop distortion. The driver stage is 3-stage darlington connected. specifications Power output: 85 watts per channel into 8ohms (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.025% Damping factor: 60 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 78dB (MM), 100dB (line) Channel separation: 60dB (MM), 65dB (line) Output: 150mV (line), 1V (Pre out) Speaker load impedance: 8ohms (minimum) Dimensions: 430 x 168 x 389mm Weight: 17.8kg Year: 1978SANSUI AU-707 AU-717 Integrated Stereo Amplifier 170 Watts RMS Vintage GOOD LOOK From JAPANESE MARKET, Refurbished, WORKING Perfect on 220/240 volts The AU-707 amplifier incorporates an advanced design feature which has extremely low inherent transient intermodulation distortion enabling negative feedback (necessary in traditional amplifier design but undesirable) to be reduced to the absolute minimum. Power amplifier design too, shows a departure from tradition resulting in the elimination of DC drift. Differential push/pull amplifier stage eliminates open-loop distortion. The driver stage is 3-stage darlington connected. Power output: 85 watts per channel into 8ohms (stereo) Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 78dB (MM), 100dB (line) Channel separation: 60d

Estate find - the six track deck plays - head phones work outputs work faders work effects work - don’t know about b deck - selling as is because of this - thx

Tested and working! Belts replaced, tone arm track lubed with dielectric silicone capacitors checked. Ready to go! This Sansui linear tracking P-L41 turntable is a fully automatic model with both direct drive and belt drive features. It was manufactured in Japan and has stereo L/R RCA audio outputs. The turntable is compatible with Type A plug regional fitment and is a first generation model with computerized linear tracking. This turntable is perfect for any home audio setup and is a great addition to any collection. Its brand, features, and model make it a unique piece of equipment for any music lover.

Sansui VCR & DVD Player 4-head Hi-Fi Stereo Digital Auto Tracking/ On-Screen Programming. Preowned. Manual Included - No Remote Tested & Works!

Sansui FR-D Series TURNTABLE DUSTCOVER *Very NICE NO CRACKS. A few superfical marks. No cracks. Rubber bumpers are in good condition.

Sansui FR-D Series TURNTABLE DUSTCOVER *Very NICE NO CRACKS. A few superfical marks. No cracks. Rubber bumpers are in good condition.

Tested and working! Belts replaced, tone arm track lubed with dielectric silicone capacitors checked. Ready to go! This Sansui linear tracking P-L41 turntable is a fully automatic model with both direct drive and belt drive features. It was manufactured in Japan and has stereo L/R RCA audio outputs. The turntable is compatible with Type A plug regional fitment and is a first generation model with computerized linear tracking. This turntable is perfect for any home audio setup and is a great addition to any collection. Its brand, features, and model make it a unique piece of equipment for any music lover.

Sansui FR-D Series TURNTABLE DUSTCOVER *Very NICE NO CRACKS. A few superfical marks. No cracks. Rubber bumpers are in good condition.

Sansui FR-D Series TURNTABLE DUSTCOVER *Very NICE NO CRACKS. A few superfical marks. No cracks. Rubber bumpers are in good condition.

Sansui FR-D Series TURNTABLE DUSTCOVER *Very NICE NO CRACKS. A few superfical marks. No cracks. Rubber bumpers are in good condition.

Sansui P-L95R Linear Tracking DD Turntable Powers up-UNTESTED as the tray does not open For Parts AS IS Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please. Normal 0 false false false EN-US X-NONE X-NONE

Sansui FR-D Series TURNTABLE DUSTCOVER *Very NICE NO CRACKS. A few superfical marks. No cracks. Rubber bumpers are in good condition.

This is a super rare, Sansui p-l41 turntable which uses linear tracking The turntable powers on but it has trouble with running functions properly. I replaced the belt on the tonearm and it moves left and right but I cannot get the arm to lower into playing position. I just don’t know enough about this unit to break it down and diagnose the problem. Would be a great restoration or project piece - can even be a great donor table Sold as is - somewhat functional - buyer pays shipping