Schiit Asgard 3 Silver with ES9028 DAC and USB-C Input New in the box - taken out for photos only. I purchased this new from Schiit for $379 in April, but have since decided on a different solution. My purchase receipt is included. Same-day shipping with payment received before 2pm PT.

Purchased in 2018, was not used a lot. Fully working, no issues. Has a few small scratches. Specifications: Frequency Response: 20Hz-20Khz, -0.1db 2Hz-400KHz, -3dB Max Power, 32 ohms: 1.0W Max Power, 50 ohms: 1.0W Max Power, 300 ohms: 380mW Max Power, 600 ohms: 190mW THD: <0.008% 20Hz-20KHz, at 1V RMS IMD: <0.010%, CCIR at 1V RMS SNR: >102db, unweighted, ref 1V RMS, in lo gain mode Crosstalk: <-72dB, 20Hz-20KHz Output Impedance: 2 ohms Gain: Hi = 6 (15.6db) or Lo = 1.5 (3.5db) Power Consumption: 30W Size: 9 x 6 x 2.25” Weight: 5 lbs

Schiit Asgard 3 Headphone Amp With USA Plug, 115VAC (Silver). Asgard 3 is a highly powerful, highly affordable, modular headphone amp and preamp that gives you a complete, single-box solution for all your desktop needs. It’s a re-thinking of the headphone amp that started it all (for Schiit, anyway—the original Asgard, introduced in June 2010, was our first product.) Asgard 3 features our unique Continuity™ topology that extends the benefits of Class A output, and accepts all the same modules as Jotunheim and Lyr 3. The Strong, Silent TypeAsgard 3’s all-new Continuity output stage delivers 3.5W into 32 ohms—a whopping 3.5X more than any previous Asgard—while also running 500mW of Class A bias. What this means is you have tons of power for virtually any headphone—and, since full power is delivered to the ¼” jack, you don’t need balanced headphone cables to take advantage of it. At the same time, Asgard 3’s low noise floor means you are ready for the most sensitive IEMs. A Complete Desktop Control CenterSelect from the internal card or rear-panel analog input, and pick high or low gain with convenient front switches. Connect the preamp output to your powered monitors for a complete desktop system—or use it as a front end to your speaker power amplifier. Asgard 3 provides all the flexibility you need. Customize to Your Specific NeedsWant more than an amp, without a bunch of boxes on your desk? Choose the ES9028 module with Unison USB™ for a world-class delta-sigma DAC for $100 more. Plus, this unique modular design means Asgard 3 won’t be dumpster-fodder when technology changes—just swap a card! Designed and Built in CaliforniaBy “designed and built in California this is what we mean: the vast majority of the total production cost of Asgard 3—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal. Our transformers are also made in California. You get the picture. Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dBMaximum Power, 16 ohms: 5W RMS per channel Maximum Power, 32 ohms: 3.5W RMS per channel Maximum Power, 50 ohms: 2.5W RMS per channel Maximum Power, 300 ohms: 600mW RMS per channel Maximum Power, 600 ohms: 300mW RMS per channelTHD: Less than 0.002%, 20Hz-20KHz, at 1V RMS, high gain mode (worst case)IMD: Less than 0.002%, CCIF at 1V RMS, high gain mode (worst case) SNR: More than 115db, unweighted, referenced to 1V RMS, in low gain mode Crosstalk: Less than -82dB, 20Hz-20KHz, 300 ohm load Output Impedance: Less than 0.2 ohms in high or low gain mode Input Impedance: 22K ohms Gain: High = 6 (15.6dB) or Low = 1 (0dB), via rear switch Topology: Fully discrete, current feedback with Continuity™ constant-transconductance output stage and stacked power supply rails Protection: Standard muting relay for delayed turn-on and fast turn-off Power Supply: Internal 48VA power transformer with 4 separate power supply rails and over 20,000uf of filter capacitance Power Consumption: 30W Size: 9 x 6 x 2 Weight: 5 lbs