Beschreibung
From Schiits website: Want a super-high-end, super-powerful, tube hybrid headphone amp and preamp—but also want the comfort of a pure solid state design? Then Lyr+ is for you! It’s the only headamp in the world that goes seamlessly from tube to solid state, using our exclusive Fusion Architecture™. I Can Live…With or Without Tube Don’t want to use a tube? Then don’t plug one in. Lyr+ switches seamlessly to its internal solid state gain stage, based on exotic depletion-mode MOSFETs. Want tube gain? Then plug in any 6SN7-type tube, and Lyr+ switches over to 100% tube voltage gain with the MOSFETs completely out of the picture. That’s the magic of Fusion Architecture. Technological Tour De Force Lyr+ is our first compact headamp that gives you relay ladder volume control, for ultimate transparency and perfect channel matching, from the lowest to highest volumes. Coupled with a powerful Continuity™ bipolar output stage, full DC coupling throughout, separate regulated high-voltage and low-voltage supplies, the convenience of remote control (in case you want to use it, say, off the desktop), and microprocessor oversight, Lyr+ is a small marvel. Power and Safety in One Lyr+ delivers up to 6W RMS per channel through the standard ¼” headphone jack, so there’s no need for balanced headphones to take advantage of all that power. But, at the same time, advanced oversight ensures Lyr+ is safe for every headphone. DC, overcurrent, and tube sensing means this is a fully modern tube amp. The Heart of a Complete, Compact System Add Bifrost 2 or Modius for digital duties, and a Vidar or Aegir as a speaker amp, and Lyr+ is the heart of a full system, ready for headphones, speakers, and both analog and digital sources. You can even turn off Lyr+’s preamp outs, if you just want to listen to headphones. Designed and Built in California By “designed and built in California this is what we mean: the vast majority of the total production cost of Lyr+—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal. Our transformers are also made in California. You get the picture. Solid State Mode, Low Gain THD: < 0.0015%, 20Hz-20KHz, at 2V RMS, 32 ohms IMD: < 0.001%, CCIR at 2V RMS, 32 ohms SNR: > 115db, unweighted, referenced to 2V RMS Crosstalk: < -72dB, 20Hz-20KHz, 32 ohms Output Impedance: 0.4 ohms Tube Mode, Low Gain THD: < 0.003%, 20Hz-20KHz, at 2V RMS, 32 ohms IMD: < 0.003%, CCIR at 2V RMS SNR: > 111db, unweighted, referenced to 2V RMS Crosstalk: < -70dB, 20Hz-20KHz, 32 ohms Output Impedance: 0.4 ohms Solid State Mode, High Gain THD: < 0.003%, 20Hz-20KHz, at 2V RMS, 300 ohms IMD: < 0.003%, CCIR at 2V RMS SNR: > 102db, unweighted, referenced to 2V RMS Crosstalk: < -85dB, 20Hz-20KHz Output Impedance: 0.6 ohms Tube Mode, High Gain THD: < 0.004%, 20Hz-20KHz, at 1V RMS, 32 ohms IMD: < 0.005%, CCIR at 1V RMS SNR: > 97db, unweighted, referenced to 2V RMS Crosstalk: < -85dB, 20Hz-20KHz Output Impedance: 0.6 ohms Preamp Output, Low Gain, Solid State THD: < 0.0003%, 20Hz-20KHz, at 2V RMS IMD: < 0.0003%, CCIR at 2V RMS SNR: > 118db, unweighted, referenced to 2V RMS Crosstalk: < -95dB, 20Hz-20KHz Output Impedance: 75 ohms Preamp Output, Low Gain, Tube THD: < 0.0025%, 20Hz-20KHz, at 2V RMS IMD: < 0.002%, CCIR at 2V RMS SNR: > 112db, unweighted, referenced to 2V RMS Crosstalk: < -90dB, 20Hz-20KHz Output Impedance: 75 ohms All Tube and Solid State Modes Frequency Response: 20Hz-20Khz, +/-0.08db Maximum Power, 16 ohms: 9.0W RMS per channel Maximum Power, 32 ohms: 6.0W RMS per channel Maximum Power, 50 ohms: 4.0W RMS per channel Maximum Power, 300 ohms: 900mW RMS per channel Maximum Power, 600 ohms: 450mW RMS per channel Gain: High 5.7 (15dB), Low 1.2 (1.35dB) Topology: Coherence ™ fully discrete, current-mode noninverting 6SN7/bipolar hybrid with constant transconductance output stage with Fusion Architecture™ depletion MOSFET gain fallback, 64-step relay ladder volume control Protection: microprocessor oversight for high DC, over-current, and tube presence; mute on any fault and management of tube and solid state gain modes Power Supply: two internal power transformers with 72VA total rating, plus with over 55,000uf of filter capacitance; two discrete regulated +/-100V supplies, two high-current +/-26V supplies, four regulated oversight supplies—20V, +/-15V, 5V Power Consumption: 30W Size: 9 x 6 x 2” Weight: 6 lbs
| 
Livesuche