Glass Sliding Right Door Bang & Olufsen Beocenter Beosound 4000 2500 3000 3200.

Technics SL-3300 3200 D2 Turntable Counterweight Counter Weight Good condition.

1x Technics SL 3100 3110 3200 3210 3300 3310 230 231 220 221 Parts # SFGA212-01 PROVENIENTE DA SL-3310COMING FROM SL-3310 STAI COMPRANDO UN SOLO PIEDE !!!YOU ARE BUYING ONE FOOT ONLY!!! >>> REFURBED <<< Prezzo per 1x PIEDINO + 1x MOLLA + 1x VITE FOTO REALE - REAL PHOTOS ORIGINALE E USATO MA IN PERFETTE CONDIZIONI DI FUNZIONAMENTOE STATO RIGENERATO, VULCANIZZATO, DURERA ALTRI 30 ANNI. >>> ENGLISH VERSION <<< Price for 1x FOOT + 1x SPRING + 1x SCREW ORIGINAL AND USED BUT IN PERFECT WORKING CONDITIONIT HAS BEEN REGENERATED, VULCANIZED, IT WILL LAST ANOTHER 30 YEARS.

Technics Sl-3200 Plattenspieler Funktioniert.

technics sl 3200 turntable for repair. -Cosmetically nice table, just needs a cleaning. -Not working totally right. Platter is spinning and the auto stop is working. But was not producing any sound when tested on two different receivers. Cue function will not raise arm off the record. -This table seems like it may be an easy fixer upper for someone who has the time and will to give it some TLC. -Dust Cover included, however the latch tabs are broken, as shown in photos.

Vintage Technics SL-3200 Direct Drive Automatic Turntable No Cover Tested. No cover One chord may need replacement (red output)

TECHNICS SL-3200 Direct Drive Automatic TurntableYou are bidding on TECHNICS SL-3200 Direct Drive Automatic Turntable. Its in great working condition and sounds amazing. Lights working and bright. Looks great, but please remember this is used item and does have signs of being used. All connections working great. Comes with NEEDLE/CARTRIDGE . Missing box and manual. Please look at the pictures before bidding, you will get what you see in the pictures. POLICY: SELLING AS IS, NO RETURNWe ask all buyers to email us before opening a EBAY CLAIM CASEI WILL NOT ACCEPT THE ITEM BACK, IF YOU CHANGE YOUR MIND OR DO NOT LIKE THE ITEM OR DID NOT READ THE DESCRIPTION AND LOOKED AT THE PICTURES.We ask all the buyers before leaving a negative or neutral, please email us with a problem first and we will do our best to make you happy again.We care about our buyers and we only want to see them happy.WE WANT TO SEE ALL OUR BUYERS HAPPY PAYMENT: Payment must be received in 2 days, if you do not pay with in 2 days, EBAY claim will be open.For shipping items please use PayPal ONLY.Address must match Ebay and PayPal LOCAL FLORIDA PICK UP ALWAYS WELCOME BY APPOINTMENT ONLY & CASH ONLY Notify us BEFORE making payment & we will send you a revised invoice without shipping charges. Allow 24hrs notice before coming by to pick up your item Available days for Pickup: M-F 12 NOON-2:30PM We are located in the CORAL SPRINGS/COCONUT CREEK/MARGATE AREA.ALL PICK UP WILL BE DONE IN PUBLIC PLACE. ALL FLORIDA BUYER: ALL FL STATE BUYERS MUST PAY 7% SALES TAX, THIS IS A LAW, IF BUYER REFUSE TO PAY SALES TAX, THAN TRANSACTION WILL BE CANCEL AND BUYER WILL BE REPORTED TO EBAY. SHIPPING: Boxing and shipping via FedEx ground to addresses in the USA continental ONLY and shipping rate is rated to all 48 state, please do not ask for the lower shipping rate. Shipping is $75 (NONE REFUNDABLE ) FEDEX DO NOT DELIVER TO PO.BOX, MUST HAVE A VALID ADDRESS.ALASKA, HAWAII & PR BUYERS must ask for the shipping rate before bidding. ATTENTION: INTERNATIONAL BIDDERSALL INTERNATIONAL BUYERS MUST USE EBAY GLOBAL SHIPPING PROGRAM, I HAVE NOTHING TO DO WITH EBAY GLOBAL SHIPPING RATE, THIS BETWEEN BUYER AND EBAY, IF YOU DO NOT LIKE THE EBAY GLOBAL SHIPPING COST THAN PLEASE DO NOT BUY THE ITEM.

Technics Direct Drive SL-3200 HiFi Seperate Turntable Record Deck Silver. Very high quality direct drive turntable from Technics. In full working order and great cosmetic condition with Technics 270c Cartridge. Please note no lid/dustcover included with sale Will be securely packaged to avoid damage in transit Will come with security seals installed to prevent fraud Please note postage quote is for mainland UK only including global shipping centre, Highlands and Islands will be more Any questions please ask Check out my other items for more great bargains

Sl-D2 3200 Q2 D3, Andere Plattenspieler Staubschutz-Repara H9Z6 Diese funktionieren auf der Außenseite der Abdeckung viel als auf der Innenseite. Ich hatte immer Probleme damit, die Abdeckung nicht vollständig schließt, wenn Sie die Laschen auf der Innenseite platzieren.Bei den Tischen vom Typ SL-D2 richten Sie die Basis sogar mit der Staubschutzhülle aus (siehe Foto). Bei den Tischen des Typs Q200 mit der kürzeren Abdeckung sollten Sie die eigentliche kleine Lasche mit der Unterseite der Abdeckung ausrichten. Ich verwende # 8 Maschinenschrauben ( Lieferumfang enthalten), die perfekt funktionieren. Wenn Sie ein etwas größeres Loch in Ihre Staubschutzhaube bohren möchten, haben Sie etwas Spielraum, falls Sie mit dem Bohren etwas daneben liegen.Um Ihren gebrochenen Tab abzuschleifen, verwenden Sie einen für (oder gleichwertig) und nehmen Sie sich Zeit. Achten Sie darauf, eine Schutzbrille zu tragen und entfernen Sie so viel wie möglich die Lasche, damit die Rückseite der Abdeckung schön und bündig ist. Sobald dies erledigt ist, möchten Sie die neue Registerkarte an der richtigen Position auf dem Cover ausrichten.Ich verwende Malerband, das keine Rückstände hinterlässt und genug ist. Stellen Sie sicher, sich die neue Lasche in der richtigen Position befindet, Sie die Abdeckung mit der Lasche (mit Klebeband gehalten) in das Scharnier Ihres Tisches legen. Dies ist einfacher, wenn Sie nur einen Tab ersetzen, aber wenn Sie beide benötigen, nehmen Sie sich einfach Zeit, um den Bereich zu sehen, in dem sich der Tab befand, an den für -Markierungen.Sobald Sie alle aufgereiht sind, ist es Zeit, die Löcher in Ihrer Staubschutzhülle zu bohren. Diese Technic-Abdeckungen sind und ich habe während des Bohrvorgangs nie eine geknackt. Dies ist wichtig. Lassen Sie die Laschen auf der Abdeckung ( mit dem Malerband gesichert). Sie können fühlen, wo sich die Lö

Product Description Description: Great solution for your for Technics broken dust cover hinges! Two brackets designed to fix broken tabs (hinges) for Technics dustproof covers SL-Q2, SL-Q3, SL-D1, SL-Q200, SL-B1, SL-DD2, SL-3200,etc. Good Quality made with aluminum alloy (not iron) Anti-rust Professionally crafted from machined iron and tumbled for smooth finish. These brackets for installation outside of dustproof cover Specification: Material: Aluminum alloy Color: Silver Size: As Picture Show Weight: Approx. 30g Any questions please contact us for quick solutions. Package Includes: 2 brackets, 4 screws, 4 washers and 4 nuts. BBQ thermometer radio with 2 sensors Digital grill thermometer meat thermometer23.55 GBPFree shippingFor HY52 250V 12A 4Pins Electric Push Button Switch for Mechanical Device TOP5.39 GBP3.0 GBPShotgun Rifle Scabbard Bag Molle Shoulder Sling Case Padded Holster14.92 GBPFree shippingElectronic Digital LCD Writing Tablet Drawing Board Graphics for Kids Gift13.42 GBPFree shippingE3JK-R4M1 DC 3A Specular Reflection Photoelectric Sensor Switch w/ Screws9.37 GBPFree shippingGarden Sprinkler Lawn Watering Water 360 Degree Rotating Irrigation with Needle16.11 GBPFree shipping powered by

Product Description Description: Great solution for your for Technics broken dust cover hinges! Two brackets designed to fix broken tabs (hinges) for Technics dustproof covers SL-Q2, SL-Q3, SL-D1, SL-Q200, SL-B1, SL-DD2, SL-3200,etc. Good Quality made with aluminum alloy (not iron) Anti-rust Professionally crafted from machined iron and tumbled for smooth finish. These brackets for installation outside of dustproof cover Specification: Material: Aluminum alloy Color: Black Size: As Picture Show Weight: Approx. 30g Any questions please contact us for quick solutions. Package Includes: 2 brackets, 4 screws, 4 washers and 4 nuts. 100pcs 18650 Lithium Battery Combination Cell Fixture Bracket Holder Pack Parts6.7 GBPFree shippingJX Servo 7.9kg 7.4V Steering Torque Digital Metal flat Wing Servo For RC Gliders14.05 GBPFree shippingWinter Women Kids Soft Cute Cat Earmuffs Ladies Girls Earflap Warmers Ear Muffs~5.97 GBPFree shipping2X Chrome Bullet Metal Motorcycle Motorbike Turn Signal Light Indicator Amber UK12.86 GBPFree shippingKid Air Rocket Foot Pump Launcher Toy Sport Game Jump Stomp Outdoor Pedal Rocket8.12 GBPFree shippingFor Suzuki GSF 600/S BANDIT GSF600 BANDIT GSR 750 Tail Tidy / Fender Eliminator18.88 GBPFree shipping powered by

Description Description&Previewshipping&policyDescription:If youre like me there is nothing worse than having to lift off your dust-cover when you want to use your turntable. I became so disgusted I decided to do something about it. These professionally manufactured tabs are made out of machined aluminum and leather tumbled for a great smooth feel and appearance. They fit nice and snug into the pockets of virtually any Technics table that come with those nasty tabs (check the measurements) and work perfectly. Very professional appearance. #8 machine screws, nuts and washers included with each tab purchased. These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside. For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some wiggle room in case youre slightly off with your drilling. To grind off your broken tab you want to use a (or equivalent) and take your time. Make sure to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover. I use painters tape which doesnt leave residue and is plenty strong enough. Check to make sure the new tab is in the proper position by placing the cover with the tab (held by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be able to see the area where the old tab was by the marks. package include: 1*set Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Description Description&Previewshipping&policyDescription:If youre like me there is nothing worse than having to lift off your dust-cover when you want to use your turntable. I became so disgusted I decided to do something about it. These professionally manufactured tabs are made out of machined aluminum and leather tumbled for a great smooth feel and appearance. They fit nice and snug into the pockets of virtually any Technics table that come with those nasty tabs (check the measurements) and work perfectly. Very professional appearance. #8 machine screws, nuts and washers included with each tab purchased. These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside. For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some wiggle room in case youre slightly off with your drilling. To grind off your broken tab you want to use a (or equivalent) and take your time. Make sure to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover. I use painters tape which doesnt leave residue and is plenty strong enough. Check to make sure the new tab is in the proper position by placing the cover with the tab (held by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be able to see the area where the old tab was by the marks. package include: 1*set Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Description Description&Previewshipping&policyDescription:If youre like me there is nothing worse than having to lift off your dust-cover when you want to use your turntable. I became so disgusted I decided to do something about it. These professionally manufactured tabs are made out of machined aluminum and leather tumbled for a great smooth feel and appearance. They fit nice and snug into the pockets of virtually any Technics table that come with those nasty tabs (check the measurements) and work perfectly. Very professional appearance. #8 machine screws, nuts and washers included with each tab purchased. These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside. For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some wiggle room in case youre slightly off with your drilling. To grind off your broken tab you want to use a (or equivalent) and take your time. Make sure to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover. I use painters tape which doesnt leave residue and is plenty strong enough. Check to make sure the new tab is in the proper position by placing the cover with the tab (held by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be able to see the area where the old tab was by the marks. package include: 1*set Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Two SL-D2 3200 Q2 D3, Others Turntable Dust Cover Repair Tabs H P4O5 These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside.For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some room in case youre slightly off with your drilling.To grind off your broken tab you want to use a for (or equivalent) and take your time. Make to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover.I use painters tape which doesnt leave residue and is plenty strong enough. Check to make the new tab is in the proper position by placing the cover with the tab ( by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be to see the area where the old tab by the for marks.Once your all lined up its time to drill out the holes in your dust-cover. These Technic covers are strong and I have never cracked one during the drilling process. This is important, Leave the tabs ON the cover (still secured by the painters tape). Youll be to feel where the holes are in the tabs and drill accordingly. I have used this many times and !Type: Dust CoverCondition: NEWCompatible Brand: For Compatible Product Line: Colour:silverMaterial:MetalPackage Contents:2 x repair hinge

Sl-D2 3200 Q2 D3, Andere Plattenspieler Staubschutz-Repara O7M1 Diese funktionieren auf der Außenseite der Abdeckung viel als auf der Innenseite. Ich hatte immer Probleme damit, die Abdeckung nicht vollständig schließt, wenn Sie die Laschen auf der Innenseite platzieren.Bei den Tischen vom Typ SL-D2 richten Sie die Basis sogar mit der Staubschutzhülle aus (siehe Foto). Bei den Tischen des Typs Q200 mit der kürzeren Abdeckung sollten Sie die eigentliche kleine Lasche mit der Unterseite der Abdeckung ausrichten. Ich verwende # 8 Maschinenschrauben ( Lieferumfang enthalten), die perfekt funktionieren. Wenn Sie ein etwas größeres Loch in Ihre Staubschutzhaube bohren möchten, haben Sie etwas Spielraum, falls Sie mit dem Bohren etwas daneben liegen.Um Ihren gebrochenen Tab abzuschleifen, verwenden Sie einen für (oder gleichwertig) und nehmen Sie sich Zeit. Achten Sie darauf, eine Schutzbrille zu tragen und entfernen Sie so viel wie möglich die Lasche, damit die Rückseite der Abdeckung schön und bündig ist. Sobald dies erledigt ist, möchten Sie die neue Registerkarte an der richtigen Position auf dem Cover ausrichten.Ich verwende Malerband, das keine Rückstände hinterlässt und genug ist. Stellen Sie sicher, sich die neue Lasche in der richtigen Position befindet, Sie die Abdeckung mit der Lasche (mit Klebeband gehalten) in das Scharnier Ihres Tisches legen. Dies ist einfacher, wenn Sie nur einen Tab ersetzen, aber wenn Sie beide benötigen, nehmen Sie sich einfach Zeit, um den Bereich zu sehen, in dem sich der Tab befand, an den für -Markierungen.Sobald Sie alle aufgereiht sind, ist es Zeit, die Löcher in Ihrer Staubschutzhülle zu bohren. Diese Technic-Abdeckungen sind und ich habe während des Bohrvorgangs nie eine geknackt. Dies ist wichtig. Lassen Sie die Laschen auf der Abdeckung ( mit dem Malerband gesichert). Sie können fühlen, wo sich die Lö

Two SL-D2 3200 Q2 D3, Others Turntable Dust Cover Repair Tabs H H2K5 These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside.For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some room in case youre slightly off with your drilling.To grind off your broken tab you want to use a for (or equivalent) and take your time. Make to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover.I use painters tape which doesnt leave residue and is plenty strong enough. Check to make the new tab is in the proper position by placing the cover with the tab ( by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be to see the area where the old tab by the for marks.Once your all lined up its time to drill out the holes in your dust-cover. These Technic covers are strong and I have never cracked one during the drilling process. This is important, Leave the tabs ON the cover (still secured by the painters tape). Youll be to feel where the holes are in the tabs and drill accordingly. I have used this many times and !Type: Dust CoverCondition: NEWCompatible Brand: For Compatible Product Line: Colour:silverMaterial:MetalPackage Contents:2 x repair hinge

Two SL-D2 3200 Q2 D3, Others Turntable Dust Cover Repair Tabs H B3V6 These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside.For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some room in case youre slightly off with your drilling.To grind off your broken tab you want to use a for (or equivalent) and take your time. Make to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover.I use painters tape which doesnt leave residue and is plenty strong enough. Check to make the new tab is in the proper position by placing the cover with the tab ( by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be to see the area where the old tab by the for marks.Once your all lined up its time to drill out the holes in your dust-cover. These Technic covers are strong and I have never cracked one during the drilling process. This is important, Leave the tabs ON the cover (still secured by the painters tape). Youll be to feel where the holes are in the tabs and drill accordingly. I have used this many times and !Type: Dust CoverCondition: NEWCompatible Brand: For Compatible Product Line: Colour:silverMaterial:MetalPackage Contents:2 x repair hinge

Sl-D2 3200 Q2 D3, Andere Plattenspieler Staubschutz-Repara D9L7 Diese funktionieren auf der Außenseite der Abdeckung viel als auf der Innenseite. Ich hatte immer Probleme damit, die Abdeckung nicht vollständig schließt, wenn Sie die Laschen auf der Innenseite platzieren.Bei den Tischen vom Typ SL-D2 richten Sie die Basis sogar mit der Staubschutzhülle aus (siehe Foto). Bei den Tischen des Typs Q200 mit der kürzeren Abdeckung sollten Sie die eigentliche kleine Lasche mit der Unterseite der Abdeckung ausrichten. Ich verwende # 8 Maschinenschrauben ( Lieferumfang enthalten), die perfekt funktionieren. Wenn Sie ein etwas größeres Loch in Ihre Staubschutzhaube bohren möchten, haben Sie etwas Spielraum, falls Sie mit dem Bohren etwas daneben liegen.Um Ihren gebrochenen Tab abzuschleifen, verwenden Sie einen für (oder gleichwertig) und nehmen Sie sich Zeit. Achten Sie darauf, eine Schutzbrille zu tragen und entfernen Sie so viel wie möglich die Lasche, damit die Rückseite der Abdeckung schön und bündig ist. Sobald dies erledigt ist, möchten Sie die neue Registerkarte an der richtigen Position auf dem Cover ausrichten.Ich verwende Malerband, das keine Rückstände hinterlässt und genug ist. Stellen Sie sicher, sich die neue Lasche in der richtigen Position befindet, Sie die Abdeckung mit der Lasche (mit Klebeband gehalten) in das Scharnier Ihres Tisches legen. Dies ist einfacher, wenn Sie nur einen Tab ersetzen, aber wenn Sie beide benötigen, nehmen Sie sich einfach Zeit, um den Bereich zu sehen, in dem sich der Tab befand, an den für -Markierungen.Sobald Sie alle aufgereiht sind, ist es Zeit, die Löcher in Ihrer Staubschutzhülle zu bohren. Diese Technic-Abdeckungen sind und ich habe während des Bohrvorgangs nie eine geknackt. Dies ist wichtig. Lassen Sie die Laschen auf der Abdeckung ( mit dem Malerband gesichert). Sie können fühlen, wo sich die Lö

As off 7/4/2018 all parts will be shipped within 1-10 business days of receiving payment. I appreciate positive feedback and work hard to obtain it. I will block all who leave non positive feedback, and do not allow me to rectify the situation. Hundreds of thousands of hard to find vintage name brand and off brand solid state, turntable, speaker, and reel to reel parts in stock. I have 48 years of parts accumulation. I might have what you need. Contact me for all your parts needs. Thank you. joeoldaudio. Part swappers beware all my parts are marked. Let’s keep eBay fun. All unpaid item cases will result in buyer blocked from all future items. International buyers please note, all international shipments are sold via eBay global shipping program only. Custom forms or amounts will not be altered.