Snaic 5 Pin Din To 3.5mm Jack. Ideal for use with Naim equipment. Previously used with Naim equipment.

AUTHENTIC with serial Naim Audio Snaic 5Pin Din to 5Pin Din Cable. comes with serial number approx 1.2m plus the connectors not in original box in perfect working order

Naim Snaic after market Flash back sales. 5 pin to 3.5 MM Jack. Approximately 2m long. Check out my other items

These cables retail at £189.00.

Naim Snaic 1.2m. 5 pin din. Very good used condition

For sale one genuine Naim Audio SNAIC cable. The cable has 180 Degree 5 pin din connectors at both ends of the preh ring twist locking type. This is the grey version and is in perfect working order with no damage to plugs or cable. The primary use of this cable is to carry the source signal between a Naim Pre-Amp and CD player, tuner, streamer etc.

Naim Snaic Flash Back Sales. 5 pin to 3.5mm Jack. approximately 500mm long. Check out my other items

Naim snaic CHORD Crimson 1M. 4 PIN DIN to 2 X RCA phono pre AMP nac 82 to Amp Use yiur nac pre to any amp As listed used but these things last forever. Happy to post or collection is available.

Naim SNAIC 4 Pin to 4 Pin Din 1m Chord Cobra for Pre 2 Power amplifier - NAP The way to set this up is that you need to have your own independent power supply to your pre amp. Can be use with DAC 1 to Power amp. Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim snaic cable SNAXO 24 to NAP250 Custom 2x 4pin DIN to XLR Active Crossover Basically this will convert you snaxo so that the channels can be split horizonally instead of vertically without having to mess about with getting perfect matching amps. With the cable method you can always revert back to left and right. Picture is for illustration only but I will use chord cables. I can make the snaxo 4 pins to XLR (NAP 250) or 4 pins (NAP 180). Naims intention are to have 2x 250s equal amps but they are not dual mono constructed we all know no 2 amps are the same which is why we want to split them vertically to get it working symmetrically otherwise you an uneven left and right sounding system. For a fully active system that cost nearly 10k that is a major correction.Typical setup.Linn LP12Naim NAC 52 preampNaim SupercapNaim Snaxo 24 <----Naim Hicap2x Naim 250 NAPNaim SBL SpeakersI can also make it so that you can use the NAP 250 for the lower end and the NAP180 for the top end. Happy to post or collection is available.

Naim snaic CHORD COBRA 1M. 4 PIN DIN 2 X RCA phono pre AMP or Hicap to AMP NAIM HAS THE BEST PRE AMP TO MAKE THE MUSIC MORE INVOLVING BUT THERE ARE BETTER ALTERNATIVE POWER AMPS OUT THERE SUCH AS BRYSTON. THIS CABLE ALLOWS YOUR TO USE THE OUT PUT FROM THE PREAMP OR HICAP SUPERCAP (4 pin) AND CONNECT IT VIA PHONO CABLE TO ANY POWER AMP. YOU CAN USE THE NAIM 52 80 72 ETC Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Snaic 5 Pin Din To 3.5mm Jack. Ideal for use with Naim equipment. Previously used with Naim equipment.

Chord Cobra 2 Locking Din for Naim separate channels version. This is the upgraded version which has separate channels for l/r and then joins at each locking din plug Locking din plugs at both ends. Ideal for linking a naim source to a pre amp.Will only post to uk

Chord Company Cobra 2 Din For Naim. Locking din plugs at both ends. Ideal for linking a naim source to a pre amp. Will only post to uk

NAIM AUDIO SNAIC 4 (DIN4 TO DIN4) INTERCONNECT CABLE GENUINE OEM NAIM CABLE. USED, BUT 100% FUNCTIONAL. RARE CABLE TO FIND FOR SALE ON THE USED MARKET. INCLUDES THE SNAIC 4 CABLE ONLY. ACTUAL PRODUCT PICTURED. FREE SHIPPING WITHIN THE CONTIGUOUS UNITED STATES ONLY. SHIPPING TO HAWAII AND ALASKA IS NOT FREE.

Naim NAP 100 Power Amplifier, Excellent Condition - Full Working Order - comes in original box and packaging for safe transit.A great way to try the Naim sound for yourself. My reason to sell is because of a change in hi-fi set-up following a house move. Includes Naim SNAIC 4-pin cable for connection from a Naim source component. Supplied with power cable and instruction manual. Courier delivery via UPS with shipping insurance. Signature on delivery required.Can be collected in person from Abbotsley, near St Neots. I can bring it to you if youre to the West of Cambridge, depending on location - please ask before buying. ------------------------------------------ Manufacturers Description:The NAP 100 has been discontinued but remains a classic expression of traditional Naim Audio power amplifier engineering. While its dimensions are conveniently compact – just a mere 20cm wide – its performance is seriously dynamic and expansive.The NAP 100 is perfect for a number of applications, adding a dose of Naim Audio musicality to a wide variety of systems. Paired with our DAC-V1 digital-to-analogue converter, it becomes the power behind a high-end system to unleash the music from your PC or Mac. Add a UnitiServe to the equation and you create a full hi-fi system that divorces your listening experience from the desktop and allows you complete control from our n-Serve iOS app. FEATURES50W per channel output into 8 ohmsDual mono power amplifier designAudiophile grade hand-selected componentsLinear power supply with a large toroidal transformerPair with the DAC-V1 and UnitiServe for compact, high-end music system TECHNOLOGY & CRAFTDespite its small size, the NAP 100 packs a serious punch when it comes to sound quality. Delivering 50 watts per channel into 8 Ohms, and 75 watts into 4 Ohms, its dual mono design is based on the circuit topology found in our reference all-in-one player, the SuperUniti.?Our engineers also took inspiration from classic Naim Audio power amplifier design in developing the NAP 100. A large toroidal transformer and hand-matched, hand-wired critical componentry allow it to bring new levels of clarity and vitality to your music. SPECIFICATIONSAudio InputsInput Impedance18k?Analogue Input1 x 4-pin DIN, 1 x RCA pair Audio OutputsMinimum Load Impedance2?Frequency Response -3dB at 3.5Hz - 69kHzGain+29dB FinishCaseBlack powder coatedFrontBlack powder coated ?PhysicalShipping Weight7.6 kgShipping Dimensions210 x 280 x 410 mmWeight5.1 kgDimensions (HxWxD)87 x 207 x 314 mm ?PowerMains Supply115V or 230V, 50 or 60HzPower Consumption260VAPower Consumption (quiescent)15VA Speaker Outputs50W per channel into 8?, 75W per channel into 4?Speaker OutputsL & R, 4mm “banana” socketsOn 27-May-23 at 21:12:41 BST, seller added the following information: Error in description, only posts in the UK

Naim snaic CHORD COBRA 1M. 4 PIN DIN 2 X RCA phono pre AMP or Hicap to AMP NAIM HAS THE BEST PRE AMP TO MAKE THE MUSIC MORE INVOLVING BUT THERE ARE BETTER ALTERNATIVE POWER AMPS OUT THERE SUCH AS BRYSTON. THIS CABLE ALLOWS YOUR TO USE THE OUT PUT FROM THE PREAMP OR HICAP SUPERCAP (4 pin) AND CONNECT IT VIA PHONO CABLE TO ANY POWER AMP. YOU CAN USE THE NAIM 52 80 72 ETC Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim Snaic after market Flash back sales. 5 pin to 3.5 MM Jack. Approximately 2m long. Check out my other items

I recently bought this brand new from my local Naim dealer, a little less than 6 months ago and have used it between a CDS3 and also a CDS2 Naim CD player to my NAC72 preamplifierIts performed faultlessly looks like its brand new, supplied in its original Chord carry bag, it made a very surprising difference in my system but Im having a complete change in direction so its up for grabs at a bargain priceIts configured in the usual Naim 5 pin source to preamp way but a point to note is that as only 3 wins are required Chord supply this model this way, Im told by my dealer this is allows them to use better quality material at the price and construct the cable for better performanceIm happy to send by courier, and will cover the cost of uk mainland parcelforce insured delivery myself. If youre overseas drop me a line and Ill get a quote for carriage for you or if youre near Chester and would prefer to collect Ill be happy to arrange this with you, if youre outside the uk Ill be using the ebay global shipping program I also have a Naim NAC72, Hicap, NAP140 and black rohodium power cable for sale so please see my other items

These cables retail at £189.00.

Naim NA-0088 , 4 PIN Signal -Kabel Original Naim ca 1,2 meter SNAIC NA - 0088 Lieferumfang: Naim NA-0088 NF Kabel 4 Pin für Pre / Endstufe z.B. Technisch : Voll Funktionstüchtig Optisch : Gebracht mit Gebrauchsspuren siehe Bilder Versand :Wir Versenden mit DHL / Kein Auslandsversand nur innerhalb Deutschland. Kaufpreis :Der Verkaufspreis beinhaltet die gesetzl. Mehrwertsteuer, diese wird jedoch nach §25a UstG (Differenzbesteuerung) auf der Rechnung nicht gesondert ausgewiesen. !!! Original Bilder !!!

Custom Hifi Naim audio cable in blue 1.3 metre in length.4 pin to 5 pin snaic. Power and signal format.Used - excellent condition.

Custom Hifi Naim phono cable in blue 1 metre in length. 4 pin to phono connections.Used - excellent condition.

Black Audio Snaic phono cable 1 metre in length with WBT-0102 Cu connectors.