Preamp was sold separately. Amp is Immaculate condition and just serviced. Adjusted to manufacturer specifications. This is a class A amplifier configuration which means there is no switching and no notch distortion. MOSFET transistors means warm sound. No scratches or marks on chassis. Inside of unit has been cleaned to like new. Please do your research on this. There are no electrolytic capacitors to worry about deterioration. All components are high tolerance zero feedback design which eliminates the inter modulation distortion (smear) common in most vintage gear. The result is a super quick and accurate amplifier with tube like sound and very high definition noticed in the bass. Original box and packaging included for safe travel. Guaranteed to to disappoint. A truly world class amplifier.

Immaculate condition and just serviced. Adjusted to manufacturer specifications. This is a class A amplifier configuration which means there is no switching and no notch distortion. MOSFET transistors means warm sound. No scratches or marks on chassis. Inside of unit has been cleaned to like new. Please do your research on this. There are no electrolytic capacitors to worry about deterioration. All components are high tolerance zero feedback design which eliminates the inter modulation distortion (smear) common in most vintage gear. The result is a super quick and accurate amplifier with tube like sound and very high definition noticed in the bass. Original box and packaging included for safe travel. Guaranteed to to disappoint. A truly world class set.

Immaculate condition and just serviced. Adjusted to manufacturer specifications. This is a class A amplifier configuration which means there is no switching and no notch distortion. MOSFET transistors means great sound. No scratches or marks on chassis. Inside of unit has been cleaned to like new. Please do your research on this. There are no electrolytic capacitors to worry about deterioration. All components are high tolerance zero feedback design which eliminates the inter modulation distortion (smear) common in most vintage gear. The result is a super quick and accurate amplifier with tube like sound and very high definition noticed in the bass. I'm also selling the matching 3008a preamp in separate listing. Original box and packaging included for safe travel. The pictured unopened Audio review magazine will go to the preamp bid winner. I'm hoping to sell them as a set, but eBay is not user friendly for that. Guaranteed to to disappoint. A truly world class set.

Tandberg TPA 3006A Amp magazine ad. From the 1985 issue of Andrew Marshalls Audio Ideas Guide magazine. It is an original. In good condition. Safely packed, we do include a stiff cardboard insert, the insert and ad wrapped with saran wrap and a Please Do Not Bend sticker on the envelope to help preserve the integrity of the ad.

Tandberg 3006A Stereo Power Amplifer - Used This unit has been sitting in the closet for years. I took it out, tested it on Radio Shack speakers and it sounds good. Sorry, but Im no expert, so I asked a friend and they said it sounded good (the friend knows a lot more about quality than I do). He also told me that I need better speakers :-( This was grandpas and he never was able to set up his sound room. This appears to be a class A amplifier and has all the earmarks of high quality construction as well as the heat output. If you have any questions, please ask prior to bidding. This item is being sold As-Is. No returns. Thank you for viewing.Specifications: Product of Norway Year of Production:1984 Black Aluminum Semiconductors: 8 pcs MOSFET Amplifier: 2 x 150W @ 8 ohms THD (0.02%) 2 x 220W @ 4 Ohms THD (<0.02%) Freq.response 20 Hz - 20 kHz (+0/-0,2) dB Inputs-Single ended RCA: 5 Hz - 150 kHz (+0/-1.5) dB Sensitivity: 80 mV Speakers Impedance form 8 - 16 ohms 1 W/8 ohms: 98dB 150 W/8 ohm: 118dB 115, 230 Volt AC W:(17.1”) x D:(13.78”) x H:(3.26”) Weight approx. 25 lbs

Tandberg 3006A Stereo Power Amplifer - Used This unit has been sitting in the closet for years. I took it out, tested it on Radio Shack speakers and it sounds good. Sorry, but Im no expert, so I asked a friend and they said it sounded good (the friend knows a lot more about quality than I do). He also told me that I need better speakers :-( This was grandpas and he never was able to set up his sound room. This appears to be a class A amplifier and has all the earmarks of high quality construction as well as the heat output. If you have any questions, please ask prior to bidding. This item is being sold As-Is. No returns. Thank you for viewing.Specifications: Product of Norway Year of Production:1984 Black Aluminum Semiconductors: 8 pcs MOSFET Amplifier: 2 x 150W @ 8 ohms THD (0.02%) 2 x 220W @ 4 Ohms THD (<0.02%) Freq.response 20 Hz - 20 kHz (+0/-0,2) dB Inputs-Single ended RCA: 5 Hz - 150 kHz (+0/-1.5) dB Sensitivity: 80 mV Speakers Impedance form 8 - 16 ohms 1 W/8 ohms: 98dB 150 W/8 ohm: 118dB 115, 230 Volt AC W:(17.1”) x D:(13.78”) x H:(3.26”) Weight approx. 25 lbs

Tandberg 3006A Stereo Power Amplifer - Used This unit has been sitting in the closet for years. I took it out, tested it on Radio Shack speakers and it sounds good. Sorry, but Im no expert, so I asked a friend and they said it sounded good (the friend knows a lot more about quality than I do). He also told me that I need better speakers :-( This was grandpas and he never was able to set up his sound room. This appears to be a class A amplifier and has all the earmarks of high quality construction as well as the heat output. If you have any questions, please ask prior to bidding. This item is being sold As-Is. No returns. Thank you for viewing.Specifications: Product of Norway Year of Production:1984 Black Aluminum Semiconductors: 8 pcs MOSFET Amplifier: 2 x 150W @ 8 ohms THD (0.02%) 2 x 220W @ 4 Ohms THD (<0.02%) Freq.response 20 Hz - 20 kHz (+0/-0,2) dB Inputs-Single ended RCA: 5 Hz - 150 kHz (+0/-1.5) dB Sensitivity: 80 mV Speakers Impedance form 8 - 16 ohms 1 W/8 ohms: 98dB 150 W/8 ohm: 118dB 115, 230 Volt AC W:(17.1”) x D:(13.78”) x H:(3.26”) Weight approx. 25 lbs

This is an auction for aTandberg 3006A Vintage Solid State Amplifier high-end stereo, used, Nice!This amplifier is general is very good they are kept in very good condition, with only a small number of light marks & scratches, but overall is high cosmetic condition as you can see in the photos. Technically in perfect condition! affords high quality sound reproduction and perfect working!This amplifier work in 115 / 230, VAC 50 -60HzPlease Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Private sale, that is, the sale is made without any liability for material defects or warranty.I do not accept returns.--------------------------------------------------------------------------------------------Please study the pictures for an appraisal of the condition, all pictures are original. the pictures should help to show the over all general condition.Let me know if you have any questions or need more picturesThank You for looking!!! & Happy Bidding by my7music )))

Tandberg 3006A Stereo Power Amplifer - Used This unit has been sitting in the closet for years. I took it out, tested it on Radio Shack speakers and it sounds good. Sorry, but Im no expert, so I asked a friend and they said it sounded good (the friend knows a lot more about quality than I do). He also told me that I need better speakers :-( This was grandpas and he never was able to set up his sound room. This appears to be a class A amplifier and has all the earmarks of high quality construction as well as the heat output. If you have any questions, please ask prior to bidding. This item is being sold As-Is. No returns. Thank you for viewing.Specifications: Product of Norway Year of Production:1984 Black Aluminum Semiconductors: 8 pcs MOSFET Amplifier: 2 x 150W @ 8 ohms THD (0.02%) 2 x 220W @ 4 Ohms THD (<0.02%) Freq.response 20 Hz - 20 kHz (+0/-0,2) dB Inputs-Single ended RCA: 5 Hz - 150 kHz (+0/-1.5) dB Sensitivity: 80 mV Speakers Impedance form 8 - 16 ohms 1 W/8 ohms: 98dB 150 W/8 ohm: 118dB 115, 230 Volt AC W:(17.1”) x D:(13.78”) x H:(3.26”) Weight approx. 25 lbs

This is an auction for aTandberg 3006A Vintage Solid State Amplifier high-end stereo, used, Nice!This amplifier is general is very good they are kept in very good condition, with only a small number of light marks & scratches, but overall is high cosmetic condition as you can see in the photos. Technically in perfect condition! affords high quality sound reproduction and perfect working!This amplifier work in 115 / 230, VAC 50 -60HzPlease Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Private sale, that is, the sale is made without any liability for material defects or warranty.I do not accept returns.--------------------------------------------------------------------------------------------Please study the pictures for an appraisal of the condition, all pictures are original. the pictures should help to show the over all general condition.Let me know if you have any questions or need more picturesThank You for looking!!! & Happy Bidding by my7music )))