Weitere Suchvorschläge:

Amazon Amazon | technics sl-q310 (6) | tecnics sl-q3 (6) | tecnics sl-q 3 (7) | technics slz 1000 (7) | technics slq-2 (7) | technics sl1500c (7) |

Two Technics SL-3200 B2 Q2 D3, Others Turntable Dust Hinge Cover Repair hox p

Ende: 30.06. 2023 05:21:54 am Freitag
  • Zustand: Neu
  • Preis: 10.41 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 295701865124
  • Verkäufer: cickicyy (1375|97.5%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Shanghai China
  • Versand nach: Worldwide
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    Description Description&Previewshipping&policyDescription:If youre like me there is nothing worse than having to lift off your dust-cover when you want to use your turntable. I became so disgusted I decided to do something about it. These professionally manufactured tabs are made out of machined aluminum and leather tumbled for a great smooth feel and appearance. They fit nice and snug into the pockets of virtually any Technics table that come with those nasty tabs (check the measurements) and work perfectly. Very professional appearance. #8 machine screws, nuts and washers included with each tab purchased. These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside. For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some wiggle room in case youre slightly off with your drilling. To grind off your broken tab you want to use a (or equivalent) and take your time. Make sure to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover. I use painters tape which doesnt leave residue and is plenty strong enough. Check to make sure the new tab is in the proper position by placing the cover with the tab (held by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be able to see the area where the old tab was by the marks. package include: 1*set Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Technics SL-Q2 Turntable Parts - Motor Circuit Board

Ende: 29.06. 2023 15:19:59 am Donnerstag
  • Zustand: Gebraucht
  • Preis: 26.31 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 145127671382
  • Verkäufer: vinyl_reclamation (13286|99.9%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Menomonee Falls, Wisconsin USA
  • Versand nach: US
  • Versandkosten: 21,33 EUR
  • bei ebay
  • Beschreibung

    Available is a motor circuit board from a Technics SL-Q2 turntable that is in very good condition. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Technics SL-Q2 Turntable Parts - Tone Arm Rest

Ende: 29.06. 2023 15:19:57 am Donnerstag
  • Zustand: Gebraucht
  • Preis: 6.32 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 134604818479
  • Verkäufer: vinyl_reclamation (13286|99.9%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Menomonee Falls, Wisconsin USA
  • Versand nach: US
  • Versandkosten: 21,29 EUR
  • bei ebay
  • Beschreibung

    Available is a tone arm rest from a Technics SL-Q2 turntable that is in fair condition. There is some discoloration (see the picture). Whats included is what is pictured. We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

technics direct drive automatic turntable system sl- q20

Ende: 29.06. 2023 12:05:53 am Donnerstag
  • Zustand: Als Ersatzteil / Defekt
  • Preis: 52.51 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 275915678756
  • Anzahl Gebote: 0
  • Verkäufer: supreme010 (852|100.0%)
  • Verkäufertyp: Privat
  • Ort: Whitley Bay Großbritannien
  • Versand nach: GB
  • Versandkosten: 5,87 EUR
  • bei ebay
  • Beschreibung

    technics direct drive automatic turntable system sl- q20. For spares or repair. Switches on, turntable works at both 33 and 45 speeds, head works on a record but no phono output Some tarnishing to the silver control buttons Needs a good clean as it’s a bit on the plastic cover See photos for a good idea of its condition It’s not mint It’s been in storage for 20 years or so in the attic Bought new in late 70’s early 80’s by my wife

4X For Technics SL-Q2 SL-B1 SL-D1 SL-Q200 3200 Dustproof Cover Repair Hinge KD

Ende: 29.06. 2023 01:46:07 am Donnerstag
  • Zustand: Neu
  • Preis: 26.6 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 314611092850
  • Verkäufer: keepdrive68 (4829|98.1%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Hebron, Kentucky USA
  • Versand nach: US
  • Versandkosten: 0,0 EUR
  • bei ebay

For Technics SL-D2 3200 B2 Q2 D3 Others Turntable Dust Repair Tabs Hinge N5Q7

Ende: 29.06. 2023 01:45:14 am Donnerstag
  • Zustand: Neu
  • Preis: 8.11 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 394639849376
  • Verkäufer: newface11 (172740|98.7%)
  • Verkäufertyp: Gewerblich
  • Ort: shanghai China
  • Versand nach: Worldwide
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    Description Description&Previewshipping&policyDescription:If youre like me there is nothing worse than having to lift off your dust-cover when you want to use your turntable. I became so disgusted I decided to do something about it. These professionally manufactured tabs are made out of machined aluminum and leather tumbled for a great smooth feel and appearance. They fit nice and snug into the pockets of virtually any Technics table that come with those nasty tabs (check the measurements) and work perfectly. Very professional appearance. #8 machine screws, nuts and washers included with each tab purchased. These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside. For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some wiggle room in case youre slightly off with your drilling. To grind off your broken tab you want to use a (or equivalent) and take your time. Make sure to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover. I use painters tape which doesnt leave residue and is plenty strong enough. Check to make sure the new tab is in the proper position by placing the cover with the tab (held by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be able to see the area where the old tab was by the marks. package include: 1*set Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Technics SL-B200 SL-Q200 Turntable Parts Dust Cover Bumpers Cushion Rubber Pair

Ende: 28.06. 2023 01:33:09 am Mittwoch
  • Zustand: Gebraucht
  • Preis: 8.48 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 175734775721
  • Verkäufer: vintage_audio_love (2528|100.0%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Saint-Constant, Quebec Kanada
  • Versand nach: Worldwide
  • Versandkosten: 9,59 EUR
  • bei ebay
  • Beschreibung

    Up for sale is thedust cover bumpers from a Technics SL-Q200 turntable Part # SFGZZ15R01 Good working condition tested. There is scratches and scuff. Please look at all the picture for condition. Any questions, please do not hesitate to contact me. Thank You !!!

Technics SL-Q2 Stereo Plattenspieler ++ läuft gut, Direct Drive ++ ohne Abnehmer

Ende: 27.06. 2023 21:26:36 am Dienstag
  • Zustand: Gebraucht
  • Preis: 121.0 EUR Auktion
  • Status: verkauft
  • Artikelnummer: 204376774346
  • Anzahl Gebote: 39
  • Verkäufer: thualpa (30820|99.6%)
  • Verkäufertyp: Gewerblich
  • Ort: Leonberg Deutschland
  • Versand nach: DE
  • Versandkosten: 9,5 EUR
  • bei ebay
  • Beschreibung

    Beschreibung:wertiger Stereo Plattenspieler wie im Titel benannt und original fotografiert. Läuft. Direktantrieb. Kommt ohne Tonabnehmer. Der abgebildete ist exakt der angebotene Turntable. Bilder zeigen den kompletten Auktionsumfang. Zustand: funktionsfähig. Äusserlich Zarge schön erhalten, Haube unschön mit Kratzern, kleiner Riß hinten, vgl. Bilder.Kein Versand ausserhalb Deutschland. Versand nur an die bei eBay fest hinterlegte Versandadresse! Nur DPD-Versand, Keine Packstation. No shipping outside Germany - were sorry! Sofort-Kaufen Anfragen zwecklos!English: item is running. Needs cartridge. Abholung ist nicht möglich! etope 8

Technics Turntable Record Player TRANSFORMER RECTIFIER BOARD OEM SL-Q200 others

Ende: 27.06. 2023 12:30:10 am Dienstag
  • Zustand: Gebraucht
  • Preis: 27.29 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 285305201515
  • Verkäufer: montana717 (13050|99.9%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Merritt Island, Florida USA
  • Versand nach: US
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    Technics Turntable Record Player TRANSFORMER RECTIFIER BOARD OEM SL-Q200 others

Technics SL-Q202 manuale duso, instruction manual

Ende: 27.06. 2023 04:46:29 am Dienstag
  • Zustand: Gebraucht
  • Preis: 39.0 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 354767737752
  • Verkäufer: instep2002 (16|100.0%)
  • Verkäufertyp: Privat
  • Ort: Massa Italien
  • Versand nach: Worldwide
  • Versandkosten: 12,0 EUR
  • bei ebay
  • Beschreibung

    Manuale duso per giradischi al quarzo a trazione diretta Technics SL-Q202 in ottime condizioni. Technics SL-Q202 Quartz direct drive turntable system operating instructions in stunning condition.

Two Technics SL-D2 3200 B2 Q2 D3, Others Turntable Tabs Dust Repair BEST O9E6

Ende: 26.06. 2023 09:02:10 am Montag
  • Zustand: Neu
  • Preis: 10.25 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 185905648059
  • Verkäufer: boanmeran (4441|98.2%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: shanghai China
  • Versand nach: Worldwide
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    Description Description&Previewshipping&policyDescription:If youre like me there is nothing worse than having to lift off your dust-cover when you want to use your turntable. I became so disgusted I decided to do something about it. These professionally manufactured tabs are made out of machined aluminum and leather tumbled for a great smooth feel and appearance. They fit nice and snug into the pockets of virtually any Technics table that come with those nasty tabs (check the measurements) and work perfectly. Very professional appearance. #8 machine screws, nuts and washers included with each tab purchased. These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside. For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some wiggle room in case youre slightly off with your drilling. To grind off your broken tab you want to use a (or equivalent) and take your time. Make sure to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover. I use painters tape which doesnt leave residue and is plenty strong enough. Check to make sure the new tab is in the proper position by placing the cover with the tab (held by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be able to see the area where the old tab was by the marks. package include: 1*set Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Technics SL-Q200 Quartz Direct Drive Automatic Turntable Plattenspieler

Ende: 25.06. 2023 08:50:19 am Sonntag
  • Zustand: Gebraucht
  • Preis: 90.0 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 125980780537
  • Anzahl Gebote: 0
  • Verkäufer: centom (2046|98.0%)
  • Verkäufertyp: Privat
  • Ort: Bremen Deutschland
  • Versand nach: DE
  • Versandkosten: 7,0 EUR
  • bei ebay
  • Beschreibung

    TECHNICS SL Q200 PlattenspielerQuarz Direct Drive Automatic Turntable Systeminkl. Technics P30 System (EPG-P30)silberfarben mit AbdeckhaubeDank Directantrieb kein ausgeleierter Antriebsriemen

TECHNICS SL-Q202 Direct drive Turntable record player

Ende: 23.06. 2023 17:34:40 am Freitag
  • Zustand: Gebraucht
  • Preis: 116.57 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 256112047554
  • Anzahl Gebote: 0
  • Verkäufer: privateforsale (219|100.0%)
  • Verkäufertyp: Privat
  • Ort: Corby, Northamptonshire Großbritannien
  • Versand nach: GB
  • Versandkosten: 10,0 EUR
  • bei ebay
  • Beschreibung

    Im owned the turntable for over 10 years and never let me down.Now selling it but it needs a new stylus because old one gone completely, lid is missing, has scratches and marks age related here and there, apart that all is working as it should be. Collection in person is recommended and all tests are available, postage = £10 (Hermes)

Technics SL-B200 SL-Q200 Turntable Parts Tonearm Arm Rest.

Ende: 22.06. 2023 22:15:31 am Donnerstag
  • Zustand: Gebraucht
  • Preis: 11.21 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 195766333977
  • Verkäufer: nehcfan (1745|100.0%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Lincoln, Nebraska USA
  • Versand nach: US
  • Versandkosten: 11,72 EUR
  • bei ebay
  • Beschreibung

    Technics SL-B200 SL-Q200 Turntable Parts Tonearm Arm Rest. FREE SHIPPING!

technics direct drive automatic turntable system sl- q20

Ende: 22.06. 2023 12:05:13 am Donnerstag
  • Zustand: Als Ersatzteil / Defekt
  • Preis: 52.6 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 275904666922
  • Anzahl Gebote: 0
  • Verkäufer: supreme010 (852|100.0%)
  • Verkäufertyp: Privat
  • Ort: Whitley Bay Großbritannien
  • Versand nach: GB
  • Versandkosten: 5,87 EUR
  • bei ebay
  • Beschreibung

    technics direct drive automatic turntable system sl- q20. For spares or repair. Switches on, turntable works at both 33 and 45 speeds, head works on a record but no phono output Some tarnishing to the silver control buttons Needs a good clean as it’s a bit on the plastic cover See photos for a good idea of its condition It’s not mint It’s been in storage for 20 years or so in the attic Bought new in late 70’s early 80’s by my wife

Technics SL-Q2 Quartz Direct Drive Automatic Turntable

Ende: 19.06. 2023 12:25:01 am Montag
  • Zustand: Gebraucht
  • Preis: 350.31 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 285297052908
  • Verkäufer: narendrap3608 (1490|100.0%)
  • Verkäufertyp: Privat
  • Ort: loudwater rickmansworth, Herefordshire Großbritannien
  • Versand nach: GB
  • Versandkosten: 56,79 EUR
  • bei ebay
  • Beschreibung

    Technics SL-Q2 HiFi 2-Speed Semi Automatic Direct Drive TurntableThis fantastic Technics SL-Q Turntable has been fully serviced and refurbished.The item has been tested and is in working order.It is in very Good condition with only slight marks and hair line scratches. Also, Please note, both brackets for the lid on the back of the turntable has been gone missing. which means you can still mount the lid on top but you wont be able to use as opening and closing.This Technics SL-Q2 comes with an attached power cable, attached phono cable, rubber slipmat and dust cover included . Please note this is fitted with a original Technics cartridge/stylus which is like new with not much use.

Technics SL-Q2 Plattenspieler Direct Drive,QUARTZ.

Ende: 17.06. 2023 20:25:15 am Samstag
  • Zustand: Gebraucht
  • Preis: 210.0 EUR FESTPREIS
  • Status: verkauft
  • Artikelnummer: 235048801123
  • Verkäufer: telewatt (164|100.0%)
  • Verkäufertyp: Privat
  • Ort: Frankfurt Deutschland
  • Versand nach: Worldwide
  • Versandkosten: 40,0 EUR
  • bei ebay
  • Beschreibung

    Gebraucht,Technics SL-Q2 Plattenspieler Direct Drive.Ist gut erhalten,mit Gebrauchtspuren.Voll Funktionsfähig.Mit Technics 207C Tonabnehmer.

Technics SL-Q2 Turntable Platter - OEM Used Original

Ende: 17.06. 2023 00:21:59 am Samstag
  • Zustand: Gebraucht
  • Preis: 13.73 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 145113827017
  • Verkäufer: chris*73 (3009|100.0%)
  • Verkäufertyp: Privat
  • Ort: Valparaiso, Indiana USA
  • Versand nach: US
  • Versandkosten: EUR
  • bei ebay
  • Beschreibung

    Here is a used original/OEM Technics SL-Q2 turntable platter. It has average signs of age (discolored spots) around the silver perimeter. It is in otherwise excellent shape. Thanks for coming by!

For Technics SL-D2 3200 B2 Q2 D3 Others Turntable Dust Repair D2U7 Tabs M2I9

Ende: 16.06. 2023 13:30:32 am Freitag
  • Zustand: Neu
  • Preis: 8.41 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 145090717383
  • Verkäufer: add2urcart (113506|98.6%)
  • Verkäufertyp: Gewerblich
  • Ort: shanghai China
  • Versand nach: Worldwide
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    Description Description&Previewshipping&policyDescription:If youre like me there is nothing worse than having to lift off your dust-cover when you want to use your turntable. I became so disgusted I decided to do something about it. These professionally manufactured tabs are made out of machined aluminum and leather tumbled for a great smooth feel and appearance. They fit nice and snug into the pockets of virtually any Technics table that come with those nasty tabs (check the measurements) and work perfectly. Very professional appearance. #8 machine screws, nuts and washers included with each tab purchased. These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside. For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some wiggle room in case youre slightly off with your drilling. To grind off your broken tab you want to use a (or equivalent) and take your time. Make sure to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover. I use painters tape which doesnt leave residue and is plenty strong enough. Check to make sure the new tab is in the proper position by placing the cover with the tab (held by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be able to see the area where the old tab was by the marks. package include: 1*set Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Technics SL-Q202 Semi-Automatic Quartz Phase Locked Direct-Drive Turntable

Ende: 16.06. 2023 08:01:25 am Freitag
  • Zustand: Gebraucht
  • Preis: 350.31 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 285297086489
  • Verkäufer: narendrap3608 (1490|100.0%)
  • Verkäufertyp: Privat
  • Ort: loudwater rickmansworth, Herefordshire Großbritannien
  • Versand nach: GB
  • Versandkosten: 56,42 EUR
  • bei ebay
  • Beschreibung

    Technics SL-Q202 Semi-Automatic Quartz Phase Locked Direct-Drive Turntable The SL-Q202 was a semi-automatic Front Control quartz-phase-locked DD turntable manufactured by the Technics Corporation of Japan. This was similar to the SL-D202, except the differences were in the type of servo systems they used. The SL-D202 has an FG servo utilising the AN6636 IC, whilst this version has a quartz-phase-locked servo system. Coupling this type of servo with a direct-drive motor reduces speed drift to within ±0.002% FeaturesAuto returnAuto StopQuartz-phase-lockedRotor-platter motorDirect driveDust coverGimbal suspension tonearmDiecast/TNRC Base constructionSpecificationsPlatter31.2?cm diameter, aluminium die-castCartridgeEPC-U25StylusEPS-25CS or equivalent EPS-25ES (Elliptical)Wow and flutter0.025?% wrmsRumble-78?dBTonearm typeStatic balanced tubularDimensions430?mm × 106?mm × 375?mmMass6.5?kg

Two Technics SL-D2 3200 B2 Q2 D3, Others Turntable BRAND Dust Repair Tabs I1D0

Ende: 16.06. 2023 07:32:47 am Freitag
  • Zustand: Neu
  • Preis: 8.31 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 234993005835
  • Verkäufer: 1st.4u (202164|98.4%)
  • Verkäufertyp: Gewerblich
  • Ort: shanghai China
  • Versand nach: Worldwide
  • Versandkosten: 0,0 EUR
  • bei ebay
  • Beschreibung

    Description Description&Previewshipping&policyDescription:If youre like me there is nothing worse than having to lift off your dust-cover when you want to use your turntable. I became so disgusted I decided to do something about it. These professionally manufactured tabs are made out of machined aluminum and leather tumbled for a great smooth feel and appearance. They fit nice and snug into the pockets of virtually any Technics table that come with those nasty tabs (check the measurements) and work perfectly. Very professional appearance. #8 machine screws, nuts and washers included with each tab purchased. These work much better on the outside of the cover instead of the inside. Ive always had problems with the cover not completely closing when you place the tabs on the inside. For the SL-D2 type tables you line up the base even with the dust-cover (see photo). For the Q200 type tables with the shorter cover you will want to line up the actual small tab with the bottom of the cover. I use #8 machine screws (included) which work perfectly. If you want to drill a slightly larger hole in your dust-cover this will give you some wiggle room in case youre slightly off with your drilling. To grind off your broken tab you want to use a (or equivalent) and take your time. Make sure to wear safety goggles and remove as much as the old tab as possible so the back of the cover is nice and flush. Once that is accomplished you want to line up the new tab in the proper position on the cover. I use painters tape which doesnt leave residue and is plenty strong enough. Check to make sure the new tab is in the proper position by placing the cover with the tab (held by tape) in your tables hinge. This is easier if youre replacing just one tab but if you need both just take your time, youll be able to see the area where the old tab was by the marks. package include: 1*set Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Technics SL-Q2 Turntable Platter Mat- OEM Used Original

Ende: 15.06. 2023 21:30:08 am Donnerstag
  • Zustand: Gebraucht
  • Preis: 13.73 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 145113831861
  • Verkäufer: chris*73 (3009|100.0%)
  • Verkäufertyp: Privat
  • Ort: Valparaiso, Indiana USA
  • Versand nach: US
  • Versandkosten: EUR
  • bei ebay
  • Beschreibung

    Here is a used original/OEM Technics SL-Q2 turntable platter mat. It is in excellent shape- completely pliable, and rip/tear-fee. Thanks for coming by!

technics direct drive automatic turntable system sl- q20

Ende: 15.06. 2023 12:04:55 am Donnerstag
  • Zustand: Als Ersatzteil / Defekt
  • Preis: 52.63 EUR Auktion
  • Status: nicht verkauft
  • Artikelnummer: 275892734737
  • Anzahl Gebote: 0
  • Verkäufer: supreme010 (846|100.0%)
  • Verkäufertyp: Privat
  • Ort: Whitley Bay Großbritannien
  • Versand nach: GB
  • Versandkosten: 5,87 EUR
  • bei ebay
  • Beschreibung

    technics direct drive automatic turntable system sl- q20. For spares or repair. Switches on, turntable works at both 33 and 45 speeds, head works on a record but no phono output Some tarnishing to the silver control buttons Needs a good clean as it’s a bit on the plastic cover See photos for a good idea of its condition It’s not mint It’s been in storage for 20 years or so in the attic Bought new in late 70’s early 80’s by my wife

4 Sets Dust Cover Repair Hinge Kit for Technics SL-D2 3200 Q3 B2 Q2 D3 Turntable

Ende: 14.06. 2023 07:49:12 am Mittwoch
  • Zustand: Neu
  • Preis: 26.57 EUR FESTPREIS
  • Status: nicht verkauft
  • Artikelnummer: 314612478528
  • Verkäufer: allfuntool21 (573|98.0%)
  • Verkäufertyp: Gewerblich (mit Basis Shop)
  • Ort: Rancho Cucamonga, California USA
  • Versand nach: US
  • Versandkosten: 0,0 EUR
  • bei ebay