Thorens TD-150 Mk II Zarge mit Chassis und Bauteilen Optisch im guten Zustand Foto zeigt Lieferung und den Zustand No PAY PAL, No Ausland shipping.

Thorens TD150 MK2 turntable Kugel cue mechanism (complete and perfectly working) Excellent clean cond Taken from late Mk2 TD150 Rare part in this condition.

THORENS TD-150 MK II Plattenspieler. Aus alten Lagerbeständen & Haushaltsauflösungen ungeprüft, als Ersatzteile

Vintage original Thorens Turntable Cabinet that held a TD-165 turntable. The cabinet is in good structural condition but the vinyl wrap on one side is starting to peel away, an easy repair that is cosmetic only. It has the transport locks and one dust cover pin. Internal measurements are 15.75x12. I believe this will fit TD-150, TD-145, TD-160, TD-165 and others, check the chassis size. It is original vintage 1960s Thorens cabinet, made in Germany. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Sold As Described, As is, no returns. Buy with confidence, see my feedback. Good listening, SonnY :)

VINTAGE THORENS TD-125 TD-15- TD-160 TURNTABLE OUTER PLATTER & PLATTER MAT PLEASE SEE MY OTHER LISTINGS..... I will post to the UK Mainland, by a tracked or signed method, the price quoted does not include the Highlands and Islands, so you will need to contact me for a quote. I will post Worldwide by a Signed or Signed and tracked shipping service, depending on weight and location. Insurance depending on final value will be an extra cost. I cannot send these items to Italy, Russia or Ukraine unless you wish to pay with Bank Transfer, due to security issues in shipping to these locations. Any Import Duties or Customs Charges are the responsibility of the buyer. I can combine postage on multiple purchases.

Vintage original Thorens Turntable Cabinet that held a TD-165 turntable. The cabinet is in good structural condition but the vinyl wrap on one side is starting to peel away, an easy repair that is cosmetic only. It has the transport locks and one dust cover pin. Internal measurements are 15.75x12. I believe this will fit TD-150, TD-145, TD-160, TD-165 and others, check the chassis size. It is original vintage 1960s Thorens cabinet, made in Germany. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Sold As Described, As is, no returns. Buy with confidence, see my feedback. Good listening, SonnY :)

Tonearm Anti-Skating weight for Thorens TD 150 MK2 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Thorens TD150 MK2 turntable Kugel tonarm parts (obviously incomplete but perfectly working) Excellent clean cond Taken from late Mk2TD150 Rare part in this condition.

Tonearm Anti-Skating weight for Thorens TD 150 MK2 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Vintage original Thorens Turntable Cabinet that held a TD-165 turntable. The cabinet is in good structural condition but the vinyl wrap on one side is starting to peel away, an easy repair that is cosmetic only. It has the transport locks and one dust cover pin. Internal measurements are 15.75x12. I believe this will fit TD-150, TD-145, TD-160, TD-165 and others, check the chassis size. It is original vintage 1960s Thorens cabinet, made in Germany. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Sold As Described, As is, no returns. Buy with confidence, see my feedback. Good listening, SonnY :)

Thorens TD-150 MkII in good used condition with a few minor marks on the Perspex lid

Tonearm Anti-Skating weight for Thorens TD 150 MK2 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Thorens TD-150 MkII in good used condition with a few minor marks on the Perspex lid

Complete 1970s turntable, complete with the dust cover, box, SME Series II Improved arm and a contemporary Shure cartridge with a good stylus. It comes with the manuals for turntable and arm and its generally in very good condition. There is some corrosion on the arm in the form of light pitting in places but its not obvious and looks more like spots of dust. It has a fairly recent belt and has no trouble reaching 45RPM. Theres still some glue in the top lefthand corner where a dust sweeping brush was mounted. Perhaps the best solution would be to put another one there. Ive got one somewhere, let me know if youd like it. Relisted due to non-communicating, non-paying bidder. If there’s no Buy It Now price displayed, there’s no Buy It Now price Unless stated, I ship overseas. If the price isn’t shown, please ask If its not shown or mentioned, its not included Please look at my other items _gsrx_vers_1516 (GS 9.3 (1516))

Vintage Manual for Thorens Turntable.

Thorens TD-150. Has recently been switched on, power ok, not tested any further than that.

Thorens TD150 MK2 turntable Kugel tonearm. Taken from late Mk2 TD150 Rare part in this condition.

Tonearm Anti-Skating weight for Thorens TD 150 MK2 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Thorens TD-150 MkII in good used condition with a few minor marks on the Perspex lid

Thorens TD-150. Has recently been switched on, power ok, not tested any further than that.

Tonearm Anti-Skating weight for Thorens TD 150 MK2 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Vintage Manual for Thorens Turntable.

Thorens TD150 MK1 turntable tonarm parts (obviously incomplete but perfectly working) Taken from 1968 Mk1 TD150 Rare part in this condition.

Thorens TD-150 MkII in good used condition with a few minor marks on the Perspex lid