For sale a tonearm from Denon DP-61F turntable. Tonearm bearings are good, no moving. Tonearm moves freely in both directions and has good continuity. Check my other ads for more high quality vintage electronics.

DENON DP 2700 PROFESIONAL TURNTABLE WITHOUT TONEARM Tested and working. Rubber mat is not included.The engine rotates when turned on, the speed is changes when switching. The speed correction worked by changing it. It seems that the correct speed is missing. Sold as defected.Japan edition 100V Shipping to Europe is 39.90 EUR. If you are not located in Europe or UK please ask about shipping rates before bidding/buying. This is a private auction so no returns or refunds are accepted, no guarantee is offered. Please see my other auctions! Terms and conditions: Product info All items are tested and evaluated. If an item is not working properly, it will be mentioned in the listing. So read carefully. Still I am not responsible for any small detail left out of the description as I am not a consignment store and not an expert on the items that I list. Cosmetic conditions will also be clearly laid out in the listing. But because everyone has a different standard, what is an 8/10 condition to me may be a 6/10 condition to you. So it is important you check out every picture on the listing. All pictures are of the actual item and taken just prior to listing it on eBay. Due to the age and/or no control over the future use of the items, all my items are sold strictly as-is as-shown without warranty expressed or implied. When an item is listed as is I do our best to describe the item, but cannot be held responsible for any issues with the item due to age or condition. Please review pictures and details carefully. No returns or refunds are accepted! Bidding Bidders with less than 10 feedback or any negative eBay feedback please contact before bidding! If you do not contact me I reserve the right to cancel your bids! All international buyers must contact me before bidding and approve the shipping cost. Failure to fallow this procedure will result in your bid being cancelled. If you have non-paying bid feedback I may have to block your bid. Shipping Please understand that I will only ship to a paypal confirmed address. All international buyers must contact me before bidding and approve the shipping cost. Failure to fallow this procedure will result in your bid being cancelled. Import duties, taxes and charges are NOT included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be PRIOR to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts. No returns or refunds are accepted! Returns are not accepted for shipping damage. If somehow the item arrives damaged, the buyer will need to inform me immediately so that I can get the claim process rolling. I will assist every way I can to get your money back. But this will be rare as I professionally pack every item that goes out to survive the rigour of shipping regardless of value. Please e-mail me with shipping questions or concerns prior to bidding. By bidding you represent that you have read, understand these rules, and agree to abide by them fully.

Denon DA-309 Tonearm collar base & screws In Very good Condition for turntable..

DENON BRAND. MODEL DP-7F. IT MAY FIT OTHER MODELS?? ++PLEASE DO YOUR OWN RESEARCH FOR PROPER FIT/USE++ TURNTABLE TONEARM COUNTERWEIGHT. USED CONDITION ++PLEASE BE AWARE SALES TAX MAYBE BE ADDED DEPENDING ON YOUR STATES POLICIES++ MADE IN JAPAN. I OFFER NO GUARANTEE OR WARRANTY OFFERED. SELLING AS IS. REFUND OFFERED. ++I WILL COMBINE SHIPPING WHEN RELEVANT++local pick-up available. IF DAMAGED IN SHIPPING BUYER MUST MAKE A CLAIM WITH THE SHIPPER. NOT JUST USE EBAY FOR RETURN. INTERNATIONAL SHIPPING WOULD ONLY BE THRU EBAYS INTERNATIONAL SHIPPING PROGRAM. international bidders please make sure you are familiar with ebay international shipping before bidding +++COST TO BE DETERMINED BY EBAY+++REFUND OFFERED. EMAIL WITH ANY QUESTION. BID AWAY!!

For sale a tonearm from Denon DP-60M turntable. Tonearm bearings are good, no moving. Tonearm moves freely in both directions and has good continuity. Tonearm comes with detachable output cable. Check my other ads for more high quality vintage electronics.

This is one of the first tonearm of Denon Columbia, manufactured for NHK broadcast station. It is long version 12 inches tonearm It comes with original headshell. This was made by Nippon Columbia Denon, using in NHK broadcast station. Very early version of DA-304. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Tehcnica vv..v This was manufactured for using with DL-103 cartridge, so I highly recommend this for DL-103 fan. This is professional version with long armward. Effective length 282mm, overhange 12.5mm. IT comes with original headshell and very beautiful condition. Specification: A long type tone arm developed and designed for broadcasting stations. A high-class miniature ball bearing is used for the horizontal rotation bearing of the rotation bearing part, and high sensitivity and high reliability have been obtained for a long period of time. In addition, an angular miniature bearing and a quenched and polished pivot are used for the upper and lower moving parts, achieving high sensitivity and stability. In addition, the bearing is protected by a special elastic body, reducing the influence of external vibration. An anti-vibration device combining viscoelastic materials is provided in the arm stand part, and vibration of the board due to external vibration is cut off. The gold-plated terminal is adopted as the connection part with a cartridge, and the reliability is improved. The double indicator micrometer type is adopted as a stylus pressure adjustment mechanism. The thing only for DA-304 is adopted as a head shell. This headshell prevents torsional resonance and reduces the mass. Moreover, removal is possible and the free exchange of a cartridge can be performed. The low capacity output cord is adopted as the output cord. Model Long type tone arm Form Static balance J-shaped Total length 381mm Effective length 282mm Offset angle 18° Overhang 12.5mm Tracking error max. 2.0° Stylus pressure adjustment range 0-3g, 0.2g steps Applicable cartridge weight range: about 11-20g (including shell) Attached head shell Dedicated head shell Headshell weight 5g Height adjustment range 45 to 75 mm (from arm board to center of pipe) Mountable board thickness 10 to 25 mm (3-point nut fastening) Output cord Low-capacity cord direct output, about 0.5m Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

This is one of the first tonearm of Denon Columbia, manufactured for NHK broadcast station. It is long version 12 inches tonearm It comes with original headshell. This was made by Nippon Columbia Denon, using in NHK broadcast station. Very early version of DA-304. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Tehcnica vv..v This was manufactured for using with DL-103 cartridge, so I highly recommend this for DL-103 fan. This is professional version with long armward. Effective length 282mm, overhange 12.5mm. IT comes with original headshell and very beautiful condition. Specification: A long type tone arm developed and designed for broadcasting stations. A high-class miniature ball bearing is used for the horizontal rotation bearing of the rotation bearing part, and high sensitivity and high reliability have been obtained for a long period of time. In addition, an angular miniature bearing and a quenched and polished pivot are used for the upper and lower moving parts, achieving high sensitivity and stability. In addition, the bearing is protected by a special elastic body, reducing the influence of external vibration. An anti-vibration device combining viscoelastic materials is provided in the arm stand part, and vibration of the board due to external vibration is cut off. The gold-plated terminal is adopted as the connection part with a cartridge, and the reliability is improved. The double indicator micrometer type is adopted as a stylus pressure adjustment mechanism. The thing only for DA-304 is adopted as a head shell. This headshell prevents torsional resonance and reduces the mass. Moreover, removal is possible and the free exchange of a cartridge can be performed. The low capacity output cord is adopted as the output cord. Model Long type tone arm Form Static balance J-shaped Total length 381mm Effective length 282mm Offset angle 18° Overhang 12.5mm Tracking error max. 2.0° Stylus pressure adjustment range 0-3g, 0.2g steps Applicable cartridge weight range: about 11-20g (including shell) Attached head shell Dedicated head shell Headshell weight 5g Height adjustment range 45 to 75 mm (from arm board to center of pipe) Mountable board thickness 10 to 25 mm (3-point nut fastening) Output cord Low-capacity cord direct output, about 0.5m Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Denon 2 Tonearm Turntable Plinth DP 80 75 7000 6000 3000. 35lb Heavy Arm holes cut for SME 3009 and ORTOFON RMG 309.

DENON Straight Tonearm Arm Pipe Tube for DP-57 DP-59 DP-62 DP-67 Used Working Has some minor sings of use

Denon 2 Tonearm Turntable Plinth DP 80 75 7000 6000 3000. 35lb Heavy Arm holes cut for SME 3009 and ORTOFON RMG 309.

DENON DA-401 tonearm with headshell Excellent Condition. Condition is Used. Shipped with USPS Priority Mail.

Denon S Tonearm Tube for Denon DP 59 or Similar Denon Turntables Absolutely Excellent condition Please see photos for more details See my other items for more turntable parts and accessories I can offer shipping discount on multiple items

Denon DA-309 Tonearm collar base & screws In Very good Condition for turntable..

Denon DP-62L Rosewood Finish Plinth Servo Controlled Direct Drive Turntable-W/ Original Box and Packaging (2) Original Denon Factory S-Curved and Straight Tonearms (2) Denon Headshell’s 4) Denon Counterweights: 108g, 68g, 40g and 23g. This turntable has been fully tested and operates flawlessly. Cosmetically it’s about as close Mint as you can get. Id rate it a 9.8 out of 10. The only sign of use I can even find was some very small hairline Marks on the dust cover. Mostly because it’s spent almost its entire life packed away in its box. (Please see detailed Pics) I had purchased 2 with the intention of setting another room up but decided to use Thorens I rebuilt instead. The only time I really used it was five years ago when I recorded a few records on to reel to reel tapes. The turntable will be properly disassembled and and double boxed shipped. Please ask any questions prior to purchasing.

This is one of the first tonearm of Denon Columbia, manufactured for NHK broadcast station. It is long version 12 inches tonearm It comes with original headshell. This was made by Nippon Columbia Denon, using in NHK broadcast station. Very early version of DA-304. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Tehcnica vv..v This was manufactured for using with DL-103 cartridge, so I highly recommend this for DL-103 fan. This is professional version with long armward. Effective length 282mm, overhange 12.5mm. IT comes with original headshell and very beautiful condition. Specification: A long type tone arm developed and designed for broadcasting stations. A high-class miniature ball bearing is used for the horizontal rotation bearing of the rotation bearing part, and high sensitivity and high reliability have been obtained for a long period of time. In addition, an angular miniature bearing and a quenched and polished pivot are used for the upper and lower moving parts, achieving high sensitivity and stability. In addition, the bearing is protected by a special elastic body, reducing the influence of external vibration. An anti-vibration device combining viscoelastic materials is provided in the arm stand part, and vibration of the board due to external vibration is cut off. The gold-plated terminal is adopted as the connection part with a cartridge, and the reliability is improved. The double indicator micrometer type is adopted as a stylus pressure adjustment mechanism. The thing only for DA-304 is adopted as a head shell. This headshell prevents torsional resonance and reduces the mass. Moreover, removal is possible and the free exchange of a cartridge can be performed. The low capacity output cord is adopted as the output cord. Model Long type tone arm Form Static balance J-shaped Total length 381mm Effective length 282mm Offset angle 18° Overhang 12.5mm Tracking error max. 2.0° Stylus pressure adjustment range 0-3g, 0.2g steps Applicable cartridge weight range: about 11-20g (including shell) Attached head shell Dedicated head shell Headshell weight 5g Height adjustment range 45 to 75 mm (from arm board to center of pipe) Mountable board thickness 10 to 25 mm (3-point nut fastening) Output cord Low-capacity cord direct output, about 0.5m Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

This is one of the first tonearm of Denon Columbia, manufactured for NHK broadcast station. It is long version 12 inches tonearm It comes with original headshell. This was made by Nippon Columbia Denon, using in NHK broadcast station. Very early version of DA-304. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Tehcnica vv..v This was manufactured for using with DL-103 cartridge, so I highly recommend this for DL-103 fan. This is professional version with long armward. Effective length 282mm, overhange 12.5mm. IT comes with original headshell and very beautiful condition. Specification: A long type tone arm developed and designed for broadcasting stations. A high-class miniature ball bearing is used for the horizontal rotation bearing of the rotation bearing part, and high sensitivity and high reliability have been obtained for a long period of time. In addition, an angular miniature bearing and a quenched and polished pivot are used for the upper and lower moving parts, achieving high sensitivity and stability. In addition, the bearing is protected by a special elastic body, reducing the influence of external vibration. An anti-vibration device combining viscoelastic materials is provided in the arm stand part, and vibration of the board due to external vibration is cut off. The gold-plated terminal is adopted as the connection part with a cartridge, and the reliability is improved. The double indicator micrometer type is adopted as a stylus pressure adjustment mechanism. The thing only for DA-304 is adopted as a head shell. This headshell prevents torsional resonance and reduces the mass. Moreover, removal is possible and the free exchange of a cartridge can be performed. The low capacity output cord is adopted as the output cord. Model Long type tone arm Form Static balance J-shaped Total length 381mm Effective length 282mm Offset angle 18° Overhang 12.5mm Tracking error max. 2.0° Stylus pressure adjustment range 0-3g, 0.2g steps Applicable cartridge weight range: about 11-20g (including shell) Attached head shell Dedicated head shell Headshell weight 5g Height adjustment range 45 to 75 mm (from arm board to center of pipe) Mountable board thickness 10 to 25 mm (3-point nut fastening) Output cord Low-capacity cord direct output, about 0.5m Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

All packages are shipped directly from japan!!Condition DescriptionThis is a used item. There is a feeling of use. Please have a look at the photos. ? Functional : The operation works well. And the operation of each button is also comfortable. ? Include : Please confirm the accessories with photos. All the accessories appearing in the photos are attached. *If you want to know more details of condition, please feel free to contact me. Please Note shipping from Japan. Policy Payment[ International Buyers - Please Note ] - Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. - Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. - These charges are normally collected by the delivering freight (shipping) company or when you pick the item up. Please do not confuse them for additional shipping charges. We only accept PayPal payments. Please pay within 3 days after your purchase.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.shipping?????shipping????? [ Shipping Address ] We ship to only address where be registered by Paypal. [ Other Carrier ] We can arrange shipment by DHL or FedEx or Japan Post. Please ask us about Handling Time and Price. [ Combine shipping & Large Quantity ] Please contact us for combine shipping & large quantity deals before payment. We do our best for you!!!!! [ Order Processing & Handling Time ] Your order will be shipped within 5~10 business days (excluding Saturday, Sunday & Japans Holiday) after the payment is confirmed. [ Compensation & Insurance] When you choose EMS, in order to receive compensation, it is necessary to open the box and check your item with delivery staff at the time of delivery. If you dont do that, you may not receive compensation and new item from us even if your item is damaged and lacked. [ Li-ion Battery ] Some countries( Germany,France,Italy,Mongolia,SriLanka,Turkey,Nigeria and more.) does not accept lithium battery via EMS, SAL by Post Office. Please check your countrys rule yourself. If we receive order from buyer who located in these countries, we will ask buyer to choose 1 from 3. 1. Ship without Ri-ion Battery removed from item. 2. Change shipping method to Fedex or DHL with additional shipping cost. 3. Cancel

DENON DA-401 tonearm with headshell Excellent Condition. Condition is Used. Shipped with USPS Priority Mail.

DENON ToneArm DP-790 5-31 music record player parts UsedDescriptionGood condition PaymentPlease pay within 3days after your purchase.ShippingWe send a product with careful packing. After confirm your payment, Well ship this item within 3-7 business days.(except for Saturday, Sunday and national holiday in JAPAN )Weekends are not available because FedEx or DHL are closedInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Denon PCL-310 SP silver headshell tonearm cartridge turntable. Denon PCl-310 SPdie cast silver headshell for straight tonearm. It has original leads. Weight:10 g Great for use with medium to light mass tonearms. Sell: $44.99 Shipping is $4.40inside USA with first class mail. Combine shipping $1 each next item.Outside USA shipping is $18 with USPS firstclass mail.

Denon DA-305Tonearm armrest In Very good Condition for turntable..

Denon DA-309 Tonearm collar base & screws In Very good Condition for turntable..

DENON DA-305 Tonearm Arm DescriptionThank you for watching. It has been tested.Please judge the condition by the pictures.Please refrain from bidding if you are looking for perfection on this item. I will answer any questions you have about the product to the best of my knowledge. I am a dealer in Japan handling used and new musical instruments and related equipment.Each piece is carefully packed and delivered to the customer. I am grateful to have met you in this way.And please take care of our shop. ARIGATOU OKOSIYASU JAPAN Shipping FedEx.DHL.UPS.JapanPost *If there is an additional shipping charge in a remote location, we will consult with you.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Denon DP-62L Rosewood Finish Plinth Servo Controlled Direct Drive Turntable-W/ Original Box and Packaging (2) Original Denon Factory S-Curved and Straight Tonearms (2) Denon Headshell’s 4) Denon Counterweights: 108g, 68g, 40g and 23g. This turntable has been fully tested and operates flawlessly. Cosmetically it’s about as close Mint as you can get. Id rate it a 9.8 out of 10. The only sign of use I can even find was some very small hairline Marks on the dust cover. Mostly because it’s spent almost its entire life packed away in its box. (Please see detailed Pics) I had purchased 2 with the intention of setting another room up but decided to use Thorens I rebuilt instead. The only time I really used it was five years ago when I recorded a few records on to reel to reel tapes. The turntable will be properly disassembled and and double boxed shipped. Please ask any questions prior to purchasing.