You get all the parts pictured, mostly power parts and a couple of the bottom feet. Please let me know if you have any questions and thanks for looking!

These are all the XLR and 1/4 Inputs and the Ground selector switches, all with snipped wires as pictured, but everything working. Please let me know if you have any questions and thanks for looking!

This board is working although it looks to have gotten some moisture behind it as there is some corrosion on the back as pictured. I am not sure how long it will last without a good cleaning so I am selling this board as Parts or Repair. Please let me know if you have any questions and thanks for looking!

So I did not have a skinny or flat enough wrench to get the Pots off this faceplate assembly, plus each Pot has 3 set screws, so I am just selling these still attached to the faceplate. Both Pots are working, the right two screw holes on the Faceplate have chipped corners, but other 4 screw holes are good. I did have to snip wires but left plenty to work with. Please let me know if you have any questions and thanks for looking!

Board is in good working order with no damage, I did have to snip the wires but left you plenty to work with. Please note the last picture is just to show where these lights go, the faceplate is NOT included. Please let me know if you have any questions and thanks for looking!

Faceplate is in great condition with no damage. Please let me know if you have any questions and thanks for looking!

Switch is in good working order with no damage, I did have to snip wires to get it out but I left plenty to work with. Please let me know if you have any questions and thanks for looking!

Handles have some damage as you can see in the pics, but both are still usable. Decent replacements if yours are missing. Please let me know if you have any questions and thanks for looking!

Board is in good physical condition and working, although 3 of the bulbs are burned out and need replaced. I did have to snip the wires but I left plenty to work with. Please let me know if you have any questions and thanks for looking!

Caps are in good condition with no damage or swelling, these should have plenty of life left in them. Please let me know if you have any questions and thanks for looking!

Meter is in good working order with no damage, technically this is for the B channel, but it could be used for either channel. Please let me know if you have any questions and thanks for looking!

Meter is in good working order with no damage, technically this is for the A channel, but it could be used for either channel. Please let me know if you have any questions and thanks for looking!

This is the Right or Channel B amp board and is in good working order. I did have to snip some wires to get it out as you can see in the pictures, but I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

This board has some fried resistors you can see in the pics, it would blow the main fuse on back when you powered the unit on so this board is for Parts or Repair. This is the Left side or Channel A amp board and I did have to snip some wires to get it out, but I left plenty to work with. Please let me know if you have any questions and thanks for looking!

Our shop are all 100% original authentic c1156ygvybUsed.Mint [ Description ] Our shop are all original authentic. [ Release Date(yyyy/mm/dd) ] Amplifier: 132W (2W x 16, 100W x 1) Speaker: [Center unit] 2.8cm cone-type beam speaker (magnetic shield) x 16 [Subwoofer] 10cm cone-type woofer x 2 Power consumption: 55W External dimensions (maximum dimensions): [Center unit] Width 944 x Height 79-89 x Depth 145 mm [Subwoofer] Width 435 x Height 137 x Depth 350 mm Width 141 x Height 430 x Depth 350 mm Weight: [Center unit] 4.3 kg [Subwoofer] 6.0 kg Accessories: Remote control, 2 AA batteries, 2 optical cables (1.5 m) , Video pin cable (1.5m), Speaker cable (3m), Intellibeam microphone, IR flasher (1m), Simple microphone stand, Surround confirmation DVD and instructions, 4 fall prevention stands, 4 non-slip pads , Simple connection / operation guide [ Country of Manufacture ] If Made in Japan is NOT described on whole listing page, Items are manufactured in other country (China, Vietnam and etc.). [ Manual & Menu Language ] We treat Japanese Market Usage Items. So items have only Japanese Manual & Menu Language. [ Electronics ] Japan Voltage : 100V Please check your countrys voltage before order. Buyer may need down transfomer to use our item, Because most of countrys voltage is higher than 100V. Plug: TypeA Please check your countrys plug. Buyer may need exchange plug. [ International Buyers - Please Note ] - Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. - Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. - These charges are normally collected by the delivering freight (shipping) company or when you pick the item up. Expedited shipping- FedEx or DHL Standard shipping- AIR MAIL or FedEx or DHL --> [ Shipping Method ] Expedited shipping- FedEx or DHL Standard shipping- AIR MAIL or FedEx or DHL

Yamahas first professional-use power amplifier that delivers high sound quality and unparalleled durability.Achieves 240W+240W (8 ohms). Features a large VU meter.Still in operation at many PA sites today. eBay listing template by 3Dsellers.com - Try for Free!

**YAMAHA P-2200 PROFESSIONAL POWER AMPLIFIER - For Parts or Repair** -Unit arrived in my facility as shown in the photos.-Probably was stored for some time in a garage or similar environment. Outside screws are rusted and there is some oxidation on the connectors on the back panel as well as certain spots on the heatsinks, etc.-The amplifier was brought up gradually with a Variac to line voltage and did stay powered on with the power light lit.-The left channel power meter fluctuates from zero to about the halfway position in a rhythmic motorboating sort of pattern with no input signal applied. The right channel power meter does not move.-Do to the overall condition of the unit, no further testing was done. The amplifier is being sold AS-IS for parts or restoration. NO returns please.-LOCAL pickup is available to avoid the shipping cost. -No other parts or accessories included -Please contact me anytime for questions regarding this product.

Our shop are all 100% original authentic c1156ygvybUsed.Mint [ Description ] Our shop are all original authentic. [ Release Date(yyyy/mm/dd) ] Amplifier: 132W (2W x 16, 100W x 1) Speaker: [Center unit] 2.8cm cone-type beam speaker (magnetic shield) x 16 [Subwoofer] 10cm cone-type woofer x 2 Power consumption: 55W External dimensions (maximum dimensions): [Center unit] Width 944 x Height 79-89 x Depth 145 mm [Subwoofer] Width 435 x Height 137 x Depth 350 mm Width 141 x Height 430 x Depth 350 mm Weight: [Center unit] 4.3 kg [Subwoofer] 6.0 kg Accessories: Remote control, 2 AA batteries, 2 optical cables (1.5 m) , Video pin cable (1.5m), Speaker cable (3m), Intellibeam microphone, IR flasher (1m), Simple microphone stand, Surround confirmation DVD and instructions, 4 fall prevention stands, 4 non-slip pads , Simple connection / operation guide [ Country of Manufacture ] If Made in Japan is NOT described on whole listing page, Items are manufactured in other country (China, Vietnam and etc.). [ Manual & Menu Language ] We treat Japanese Market Usage Items. So items have only Japanese Manual & Menu Language. [ Electronics ] Japan Voltage : 100V Please check your countrys voltage before order. Buyer may need down transfomer to use our item, Because most of countrys voltage is higher than 100V. Plug: TypeA Please check your countrys plug. Buyer may need exchange plug. [ International Buyers - Please Note ] - Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. - Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. - These charges are normally collected by the delivering freight (shipping) company or when you pick the item up. Expedited shipping- EMS or FedEx or DHL Standard shipping- AIR MAIL or FedEx or DHL --> [ Shipping Method ] Expedited shipping- EMS or FedEx or DHL Standard shipping- AIR MAIL or FedEx or DHL

Soundbar Yamaha YSP 2200 mit Subwoofer, gebraucht, guter Zustand. Mikrofon zum Einmessen und gebundene Bedienungsanleitung sind auch dabei, die Fernbedienung hat ein paar Kratzer funktioniert aber einwandfrei. Aus Nichtraucherhaushalt, Versand nur innerhalb Deutschlands, NP ca 600€

Great working condition. Picture of actual items. Filling the Living Room With Amazing Sound From a Compact EnclosureThis extremely convenient Digital Sound Projector is low profile enough to fit neatly in front of a TV and is 3D compatible (HDMI V.1.4a).Low profile soundbar allows positioning in front of most TVs for a neat and compact AV systemSubwoofer is also convenient — can be placed vertically or horizontallyDigital Sound Projector technology provides true surround sound for maximum enjoymentBuilt-in 132W digital amplifier11 CINEMA DSP programmes: 3 Movie, 3 Music, 5 Entertainment including improved Game programmeHD Audio format decoding1080p-compatible HDMI (V.1.4a with 3D and Audio Return Channel, 3 in/ 1 out) IntelliBeam Automated System CalibrationDock port for adding optional YID-W10, YDS-12 and YBA-10

Yamaha Modell Nummer: P-2200 Stromverstärker (Transistor)Das Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.  href=https://maxcdn.bootstrapcdn.com/font-awesome/4.7.0/css/font-awesome.min.css> Yamaha Modellnummer: P-2200 Leistungsverstärker (Transistor)  Beschreibung Garantiezeitraum3 Monate GarantieVoraussichtlicher VersandInnerhalb von 1 WocheVeröffentlichungsdatum1976Merkmale/BemerkungenYamahas erster kommerzieller Leistungsverstärker, der Ursprung von hochwertigem Klang, Zuverlässigkeit und Präzision! Es gibt Ihnen einen entspannten, unverfärbten, natürlichen Klang!Merkmale/BemerkungenJuli 2023 Wartung durch unseren beauftragten Auftragnehmer abgeschlossen. (Instrumentenlampe austauschen. Gummifüße anbringen.)Merkmale/Anmerkungen*Die Frontplatte weist einen Riss auf. Es gibt insgesamt Kratzer und ein Gefühl von Gebrauch. WEB-Nr. 2012950000030281 101020001003]?Hinweis nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht berechtigt.?  Die Stromversorgung für dieses Produkt ist AC100V 50/60Hz.In einigen Ländern ist möglicherweise ein Transformator erforderlich.Bitte bereiten Sie den Transformator kaufseitig vor. Steckdosenspezifikationen ?Typ AWenn es sich vom A-Typ unterscheidet, ist ein Konverter erforderlich.     Sie in anderen Bereichen als 100 V.Wenn Sie den von mir verkauften Transformator verwenden, können Sie ihn in anderen Bereichen als 100 V verwenden.eBay.comhttps://www.ebay.com/itm/373547463184Ebay UKhttps://www.ebay.com/itm/373547520813eBay.euhttps://www.ebay.com/itm/373547520926eBay.auhttps://www.ebay.com/itm/373547520958Wir verkaufen auch außerhalb von eBay.com.Bitte kontaktieren Sie uns, wenn Sie einen Kauf tätigen möchten.Wenn Sie weitere Fragen haben, kontaktieren Sie mich bitte.* In einigen Gebieten ist dies möglicherweise nicht möglichBitte überlegen Sie sorgfältig.Zahlung ??Wir akzeptieren nur Zahlungen per PayPal.??Bitte zahlen Sie innerhalb ??3 Tage nach Auktionsende. Versand Kostenloser VersandVersand per Express-EMS, DHL oder FedExWir liefern mit der schnellsten Versandart.Versand mit Schadens-/VerlustversicherungMit einer Verfolgungs Nummer??(10-15 Tage in die USA) ??(10-30 Tage oder mehr in andere Länder) Verkaufsbedingungen ??[Über zurückgegebene Waren]????Rücksendungen werden nur akzeptiert, wenn der Artikel im Originalzustand war?   nicht der in der Auktion beschriebene Artikel.            [Zurückkehren]       Rücksendungen aus persönlichen Gründen werden nicht akzeptiert.    Internationale Käufer – Bitte beachten Sie: Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. Bitte erkundigen Sie sich vor dem Bieten oder Kaufen beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.  Bereitgestellt von HARUGarantiezeitraum3 Monate GarantieVoraussichtlicher VersandInnerhalb von 1 WocheVeröffentlichungsdatum1976Merkmale/BemerkungenYamahas erster kommerzieller Leistungsverstärker, der Ursprung von hochwertigem Klang, Zuverlässigkeit und Präzision! Es gibt Ihnen einen entspannten, unverfärbten, natürlichen Klang!Merkmale/BemerkungenJuli 2023 Wartung durch unseren beauftragten Auftragnehmer abgeschlossen. (Instrumentenlampe austauschen. Gummifüße anbringen.)Merkmale/Anmerkungen*Die Frontplatte weist einen Riss auf. Es gibt insgesamt Kratzer und ein Gefühl von Gebrauch. WEB-Nr. 2012950000030281 101020001003]?Hinweis nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht berechtigt.?  Die Stromversorgung für dieses Produkt ist AC100V 50/60Hz.In einigen Ländern ist MPN Does not apply Country Japan Brand Na UPC Does not apply Model Na Type Na

Suraundanlage. Dolby, dts-HD, 5.1 + 7.1

WHAT HI-FI SUPERB superb from a smoke free home AND JUST SO MUCH IN THIS MAGAZINE WHAT HI-FI - YAMAHA YSP-2200 - KEF Q300 - CASTLE KNIGHT 2 - XTZ CD 100 - dSC PUC

Yamaha YSP-2200 soundbar for sale. Excellent condition. From a smoke-free home. Collection only, May deliver locally. Remote control and microphone (for room sound calibration) included. Dimensions: Soundbar: 944 x 79-89 (height adjustable) x 145mm Subwoofer: 435 x 137 x 350mm