YAMAHA NS-1000MM Speaker System Home Theater 3ways Bookshelf Type Cone DomeDescriptionYAMAHA NS-1000MM Speaker System Home Theater 3ways Bookshelf Type Cone Dome Its used.No outer box.Please check the condition with the image.Shipping Standard Shipping(Japan Post , FedEx , DHL) The Package will arrive 5-14 days after shipment. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.If the cancellation is due to the buyer, we will charge a PayPal fee.If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Vintage Yamaha YP-D10 Direct Drive Quartz Lock Stereo Turntable Listed is a vintage and scarce Yamaha YP-D10 Direct Drive Quartz Lock Turntable. Yamaha’s top of the line turntable and a true Audiophile quality table. I have owned this beautiful classic turntable for many years. It has always been well cared for and never abused. This fine turntable was setup with all Yamaha separate components in a spare room and seldom used. It is in excellent condition and the wood veneer is in wonderful condition. No serious scratches or damage that is often the case. The lid is very clean as well no cracks or damage. Some very light scratches may be evident. This is all original and has never been altered. It still retains it’s original feet. Very well built with solid wood plinth and quite heavy with a weight of thirty six pounds. The weight means music has proper pace and dynamics. Cheaper plastic turntables can never reproduce this sound. Equally important is an extremely nice high quality tonearm with adjustments that include VTAF (Vertical Tracking Angle On The Fly). This permits fine tuning the cartridge to the record with top level precision. This turntable has never ceased to amaze me in it’s sound accuracy and versatility. The powerful high torque motor with precise servo control ensure the speed is always spot on. The tonearm automatically lifts at the end of a record and it shuts off, features that still work perfectly to this day. In fact everything works as it’s supposed to. It’s in excellent condition. Last but not least the clean lines, design and beauty of this turntable are unsurpassed. I have used this with various moving magnet and moving coil cartridges with great results. Mounted on the beautiful S-Shaped tonearm is a Dynavector 10X2 Moving Coil Cartridge and Yamaha HS-1000 Headshell. This was manufactured in Japan in 1978 in the golden era of hi-fidelity. This can easily be considered an audiophile turntable. A true gem in the world of audio gear. This was made for the North American market is both 120 and 240 volt model. This classic turntable would work perfectly with any vintage or modern sound system. Ideal for use with Yamaha, Sansui, Pioneer, Technics, Sony, Kenwood, JVC Victor, Akai and many other brands. Description: A record player that pursues high dimensional sound quality with the UR method (Ultimate Refining Method). The UR method takes note of the fact that sound changes depending on the parts and materials that make up every part. It is an approach to control vibration modes by suppressing micro-vibrations below the level of human hearing. This further enhances sound perfection. To achieve more stable rotation, the drive system of the YP-D10 consists of three stages : a quartz PLL servo for low frequency disturbance, a large inertia of a heavy turntable for high frequency disturbance, and an FG servo for medium frequency disturbance. The motor has a large torque of 1.2 kg ? cm and uses a DC motor with excellent bare characteristics. In addition, the rotational speed is controlled by the double servo system of the FG (frequency generator) servo system and the quartz PLL (phase locked loop) servo system to obtain high rotational accuracy. In the FG servo system, a rotational speed detector (FG) detects a signal from the FG that generates a frequency proportional to the rotational speed of the turntable and controls the rotational speed of the turntable so that the frequency of the signal becomes constant. The quartz PLL servo system was introduced to further improve the rotational accuracy of the FG servo system. This system controls the frequency of the output signal from the FG and the reference signal oscillated by the crystal oscillator to eliminate the phase shift. The rotational accuracy can be improved to the oscillation frequency accuracy of the crystal. The rotational accuracy when this quartz PLL is applied is within ± 20 ppm including temperature drift. The turntable is made of aluminum die cast with a diameter of 31 cm and has a precise dynamic balance from the molding stage. In addition, it is designed to move the mass to the outer circumference and has an inertial mass of 350 kg ? cm.2It is improved against load variations at high frequencies where the quartz PLL becomes ineffective. The power supply section uses a strong one that maintains a constant voltage of 24 V even when a current of 1100 mA is taken out to obtain an accurate response to load fluctuations. The tone arm is a gimbal support system with a pivot made of polished chromium molybdenum steel. It has an initial motion sensitivity of 3 mg vertically and 5 mg horizontally. The arm body is an S-shaped pipe arm made of a special aluminum alloy that has more than twice the strength and hardness of pure aluminum. The pipe is filled with a filler to suppress resonance. The inside force canceler is a roller string and counterweight type, and highly adjustable. The head shell is made of high rigidity special aluminum alloy die-cast to reduce the total weight of the tone arm and prevent resonance. In addition, an extremely thin and flexible special lead wire is used for the lead wire to increase the sensitivity of the arm. Since a NEGLEX low-impedance cable is used for the pickup cable, the resistance value from the cartridge to the pin plug is 0.94 ?, which is less than 2/3 of the conventional value. Also, the plug is gold-plated. Equipped with 6 mm stroke elevation ring rotary arm height adjustment mechanism so that commercially available cartridges can be used. Up and down of 1 mm is possible with one rotation of the ring. The cabinet is not a box but a solid type with 64 mm thick laminated high-density particleboards to reduce the adverse effects of vibration. In addition, a 1.6 mm thick steel plate is used for the back plate to prevent howling. It also protects against unwanted radiation from crystal oscillator circuits and logic circuits. The arm stand and arm base are made of 1 kg zinc die cast and are fixed to the cabinet. In addition, the arm support is fixed by tightening it with a surface like a vise, and unnecessary vibration is suppressed by fixing the root of the arm sufficiently. In addition, a large double damping type insulator has been adopted in consideration of the material. It is equipped with a silent ending mechanism. When a recording is finished and the needle tip of the cartridge enters the final sound groove, the queuing lever automatically operates to quietly raise the cartridge from the recording surface and turn the power off. This mechanism uses a photoelectric detector to detect the moving speed of the shutter attached to the lower part of the tone arm and drives an electromagnetic solenoid to operate the queuing lever and power switch. This mechanism does not impose any load on the arm movement and does not cause any malfunction. Finished with ebony decorative urethane open-pore finish. Specifications: TypeRecord playerMotor12-pole 24-slot DC Hall MotorDrive systemDirect driveTurntable31 cm aluminum die cast, 2.4 kgWow flutter (WRMS)Not more than 0.03%Signal-to-noise ratio62 dB or moreRotational speed adjustment+ / - 3%Tone armS-shaped static balance gimbal support armWeight range of the mounting cartridge2g ~ 15gAnti-skaterRoller string counter weight systemPower supply voltage100 VAC, 50Hz/60HzRated power consumption9WExternal dimensionsWidth 470x Height 163x Depth 378 mmWeight16k

Yamaha Ns1000m Speaker Binding Posts X2. Accepts bare wire and banana plugs, foam backed as to keep an air tight fit. Goo replacement terminals for yamaha ns1000m type speakers

Item Description ?Manufacturer: YAMAHA ? Model number: YSA-1 *The DENON DL-110 MC type cartridge has continuity, but the stylus tip is missing. Continuity and basic operation have been confirmed. Replay confirmed! It is used, but it is a good item. As it is an old work, please understand the dirt of aging deterioration. Pack tightly to avoid breakage. Shipping We ship to Worldwide. I ship only to the address registered your PayPal account. Shipping method: DHL or Fedex or Japan Post You cannot choose the delivery company. Please understand in advance. Delivery date Example: US 5 days to 1 week (excluding weekends) Visa numbers are required in some countries. Please prepare in advance. Payment Payment within 24 hours after winning the bid Other term International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -?do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. I do not want to pay because taxes are expensive. It can not be returne for reasons such as. Please understand in advance.

Item Description ?Manufacturer: YAMAHA ? Model number: YSA-1 *The DENON DL-110 MC type cartridge has continuity, but the stylus tip is missing. Continuity and basic operation have been confirmed. Replay confirmed! It is used, but it is a good item. As it is an old work, please understand the dirt of aging deterioration. Pack tightly to avoid breakage. Shipping We ship to Worldwide. I ship only to the address registered your PayPal account. Shipping method: DHL or Fedex or Japan Post You cannot choose the delivery company. Please understand in advance. Delivery date Example: US 5 days to 1 week (excluding weekends) Visa numbers are required in some countries. Please prepare in advance. Payment Payment within 24 hours after winning the bid Other term International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -?do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. I do not want to pay because taxes are expensive. It can not be returne for reasons such as. Please understand in advance.