Altec Lansing 75 watt Power Amplifier Model 1407A Untested Amplifier was plugged in which it powered on. Unable to test due to lack of set up. Cosmetically in very good condition. Model#: Altec Lansing 1407ASerial#: K0000289532 ELECTRONICS DISCLAIMER: Due to the nature of electronics, Serial numbers have been photographed and recorded, and tamper proof labels are used to prevent tampering. We strive to take excellent pictures and describe items as thoroughly and accurately as possible, but please dont hesitate to ask any questions that you may have. Thanks for looking! EB-11898

Audio and meter tested, sounds outstanding. This was actually recently installed in a JBL 4431 Monitor, but upon further research I found that this actually came from an Altec 891V, or another Altec model very close to that one. I will ship UPS Ground or USPS Priority, no later than 1 business day handling time (business days are M-F). This will be packed with exquisite care. I will accept returns within 30 days, but please carefully review the notes and all pictures before buying! Please also feel free to message me if you have any questions. Thanks for looking, and happy bidding!

12 inch woofer from Working Altec Lancing Santana II (original version, not second release). This is the stamped steel frame, 4 holes, recessed mount version! Woofer was refoamed about 4 years ago by Central Florida Speaker Repair in Orlando. Had a flood and the Santana II cabinets got ruined - so parting them out. Note that this is a pressed paper cone and the top layer of paper has a wrinkle molded into it. Purely cosmetic. It is not visible on the back of the cone (since it is many layers of paper pressed with pulp to make the cone) and in no way effects the sound. This is just a minor artifact of the manufacturing process back in the day. Hard to see in the pictures but just want to make sure I pointed it out. See video with woofer working as expected. Note recorded using my iPhone Microphone so..... FIT:This Woofer came from the original version of the Santana II speaker, It was also used in the Model 9 Series I. Make sure this this is the version needed: 4 holesStamped Steel Frame12.5 rim diameterrecessed mounting to the front baffle NOTE:This will NOT fit the second version of Santana II or the Series II Model 9! Those use cast aluminum frame and have 8 holes not 4 and are surface mounted. See my other listing if you need the cast frame 6 hole version of this woofer. Please see all the pictures and video as they are an important part of the description! Make sure your 12 woofer looks like this listing! Shipping weight is over 16 lbs. so its heavy. Woofer will be packed with internal support and protection in a large outer box. I will refund any shipping costs you pay over actual costs. Local pick up also OK. Let me know if you have any questions. Again I also have the surface mount, cast frame version of this woofer in my other listing. Note: while the woofers are not interchangeable due to different mounting and frame construction, they sound identical.

Genuine Altec Lansing 15v Model 4815090R3CT Speaker AC Adapter Power Supply.

12 inch woofer from Working Altec Lancing Santana II (second version, not original release). This is the cast aluminum frame, 8 holes, Surface Mount version! Woofer was refoamed about 4 years ago by Central Florida Speaker Repair in Orlando. Had a flood and the Santana II cabinets got ruined - so parting them out. See video with woofer working as expected. Note recorded using my iPhone Microphone so..... FIT:This Woofer came from the second version of the Santana II speaker, It was also used in the Model 9 Series II. Make sure this this is the version need: 8 holesCast Aluminum Frame13.5 rim diameterSurface mount to the front baffle NOTE:This will not fit the original Santana II or the original Model 9! Those use a stamped steel frame and have 4 holes not 8. See my other listing if you need the stamped steel 4 hole version of this woofer. Please see all the pictures and video as they are an important part of the description! Make sure your 12 woofer looks like this listing! Shipping weight is over 17 lbs. so its heavy. Woofer will be packed with internal support and protection in a large outer box. I will refund any shipping costs you pay over actual costs. Local pick up also OK. Let me know if you have any questions. Again I also have the recessed mount, stamped frame version of this woofer in my other listing. Note: while the woofers are not interchangeable due to different mounting and frame construction, they sound identical.

800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 (IN SCANNED PDF FORMAT SENT VIA EMAIL) THIS ITEM IS A DIGITALLY DELIVERED ITEM, YOU WILL NOT BE RECEIVING A PHYSICAL PRODUCT CONDITION: SCANNED ITEM THIS IS A SCANNED ITEM. THIS ITEM WILL ONLY BE SENT VIA EMAIL IN A PDF FORMAT TO SAVE S&H FEES, THERE MAY BE FOLDOUT DIAGRAMS, THESE PAGES ARE SCANNED WITH THE FOLDS MARKED WITH AN ARROW AND HI LIGHTED IN YELLOW. THERE MAY BE PAGES THAT WERE MISSED OR INCOMPLETE; THESE PAGES HAVE BEEN RE-SCANNED AND PLACED AT BACK. THERE ARE SOME CASES WHERE ALTERNATE PAGES MAY BE INVERTED. AFTER SCANNING EACH OF THESE FOLDERS ALL WERE CHECKED FOR ERRORS AND MISSING PAGES AND CORRECTIONS AND ADDITIONS ARE MADE. BLANK PAGES, PAGES WITHOUT TECHNICAL TEXT, NO DIAGRAMS OR WITHOUT DATA ARE NOT INCLUDED. THESE MAY BE A BACK PAGE WITH JUST A PHRASE LIKE PRINTED IN JAPAN OR THE LIKES WITH NO OTHER INFO. THIS IS DONE TO SAVE STORAGE. PULLOUTS OR OVERSIZED PAGES ARE SCANNED IN 8 ½ X 11 “SECTIONS WITH THE ABOVE MENTIONED OVERLAY POINTS MARKED These are intended for technical reference in servicing. Some pages may be scanned horizontal to save time. The PDf file should be read in Adobe software or PDF reader. Any questions please contact seller. SOME PAGES MAY HAVE TO BE ROTATED TO VIEW. ebay messaging does not support pdf at this time. we send the file via email to the email you supply once purchase is complete. with thousands of manuals on hand we may have the one you need. contact us for details. Service manual, Technical information.

Altec Lansing 12 Loudspeakers - Model 9820-8A Duplex System 8 Ohms - Rare Model - 13.8 x 18.8 x 22 - Please see all pictures. The bumper strips are cracked . Rest of the unit is solid. Each weigh approximately 50 Lbs. ***May ship in two boxes . Local pick-up accepted. Would need to contact me prior to end of auction.

ALTEC LANSING SWITCHING POWER SUPPLY - MODEL NO: S015BM0900160 - THE POWER SUPPLY IS USED BUT IN GOOD CONDITION & WORKING ORDER. INPUT: 100-240V ~ 50/60Hz 450-200mAOUTPUT: 9.0V == 1600mA #1621

Offered for your consideration is one (1) vintage ALTEC-LANSING 2 inch cone tweeter removed from my ALTEC-LANSING Model 208 speakers, manufactured in 1982. ALTEC sourced this high frequency driver from Japan’s Tonegen, one of the world’s largest suppliers of OEM audio drivers. So, please see my large photos and read the remaining description to decide if this capable, hard-to-find tweeter is correct for your needs. This ALTEC Model 208 tweeter is in clean, excellent condition. It has a structurally perfect paper cone and flawless voice coil dustcap, well-protected by the removable aluminum faceplate with acoustically-transparent grille. Plus, the anodized steel basket is in great shape with no dings, scratches, or oxidation, just some wear at the mount holes from hurried factory installation. Also, the +/- terminals measure the standard .205”, have never been soldered on the spades, and positive is the red gasket side. Overall, this tweeter is exceptionally well-preserved. Most importantly, it’s been fully tested and sounds terrific—very strong with clear upper frequency detail approaching the sparkly threshold of audibility. Plus, I tested its DC resistance at 6.3? consistent with a nominal 8 ohm driver rating. Lastly, the faceplate measures 2 13/16” square, the cone proper is 2?”, it stands 1?” tall (not including the 5” x 3” cover plate and raised screen), and the mount holes are spaced 2?” adjacent / 3?” diagonal apart, c-t-c. This is a great find if your ALTEC Model 208 has a blown tweeter and will have your speaker sounding its best again! And, long out of production, it’s a great spare to have on hand just in case. As pictured and described, this ALTEC LANSING 2” cone tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $7.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet label photo is presented only for donor model reference

In vendita:Preamplificatore Stereo Serie Gemini PA-701 Pre Amplifier anni 80 stereo con doppia uscita controllo finali & Finale di Potenza Serie Altec Lansing Model 9441A Anniversary Series 100 Watt su 8 ohms in flight case Rack tutto vintage anni 80 . Sono entrambi perfettamente funzionanti ed in condizioni originali , rig in uso da oltre 30 anni . Vendo per upgrade impianto 2023. Si prega di guardare tutte le foto, condizioni e i difetti restaurati sono ben visibili e documentati. Possibilità di visione e ascolto previo appuntamento se seriamente interessati, possibilità di consegna di persona nel raggio di 200 Km da Modena Previo accordi. Consigliato Ritiro di persona visto le dimensioni e natura delicata dei altoparlanti. Se stai facendo offerte dallestero, contattami per i costi esatti di spedizione e consegna! Sono un venditore privato; non posso darti garanzia su dispositivi audio che hanno più di 20-30-40 anni! Si prega di leggere bene la descrizione e studiare tutte le foto fornite per le condizioni ecc. Per extra info - foto - ecc prego contattarmi via email. Dispositivi / articoli audio vecchie vintage richiedono un imballaggio di buona qualità con protezione aggiuntive nella maggior parte dei casi scatole su misura con materiali aggiuntivi per proteggere le unità - driver - tubi ECC, quindi contattami prima di fare offerte per preventivi esatti e costi di imballaggio extra. Vedi i miei altri annunci per diffusori e componenti audio Vintage.Grazie For sale Preamp Stereo Serie Gemini PA-701 & Altec Lansing Model 9441A Anniversary Series 100 Watt su 8 ohms in flight case Good working order in flight case , old school gear !! IIf you are bidding from outside Italy, Please contact me for exact shipping and delivery costs!I am a private seller, cant give you warranty on audio gear that is over 20-30-40 years old! Please read well the description and study all the photos provided for conditions. Old and vintage audio gear/items require good quality packing with extra protection and in most cases custom-made boxes with additional materials to protect the units - drivers - tubes ECC , sow please contact me prior bidding for exact quotes and extra packing costs. See my other audio gear listings !!!Thank you

Altec Lansing 416-8B Vintage Woofer used in Model 19.

ALTEC LANSING Plug In Class 2 TRANSFORMER Model A9-400 Input 120V 60Hz 12W

ALTEC LANSING SWITCHING POWER SUPPLY - MODEL NO: S015BM0900160 - THE POWER SUPPLY IS USED BUT IN GOOD CONDITION & WORKING ORDER. INPUT: 100-240V ~ 50/60Hz 450-200mAOUTPUT: 9.0V == 1600mA #1621

DescriptionAuthenticity: 100% AUTHENTIC! If you have any question about the condition, accessories, or anything about the product,Please feel free to message us. We are glad to answer all your concerns. ShippingDHL, Fedex Fastshipping3-10 business days after shipment(Tracking number + Insurance.)PaymentPlease give me the payment within 3days from the date of bid.About UsWe sell our items on other websites and in our retail stores in Japan at the same time.If the item was sold out before your purchase, your order will be cancelled and a full refund will be issued immediately. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you.

ALTEC LANSING SWITCHING POWER SUPPLY - MODEL NO: S015BM0900160 - THE POWER SUPPLY IS USED BUT IN GOOD CONDITION & WORKING ORDER. INPUT: 100-240V ~ 50/60Hz 450-200mAOUTPUT: 9.0V == 1600mA #1621

Altec Lansing 12 Loudspeakers - Model 9820-8A Duplex System 8 Ohms - Rare Model - 13.8 x 18.8 x 22 - Please see all pictures. The bumper strips are cracked . Rest of the unit is solid. Each weigh approximately 50 Lbs. ***May ship in two boxes . Local pick-up accepted. Would need to contact me prior to end of auction.

Altec Lansing 12 Loudspeakers - Model 9820-8A Duplex System 8 Ohms - Rare Model - 13.8 x 18.8 x 22 - Please see all pictures. The bumper strips are cracked . Rest of the unit is solid. Each weigh approximately 50 Lbs. ***May ship in two boxes . Local pick-up accepted. Would need to contact me prior to end of auction.

ALTEC LANSING SWITCHING POWER SUPPLY - MODEL NO: S015BM0900160 - THE POWER SUPPLY IS USED BUT IN GOOD CONDITION & WORKING ORDER. INPUT: 100-240V ~ 50/60Hz 450-200mAOUTPUT: 9.0V == 1600mA #1621