Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Ich verkaufe Audio Equipment aus meiner privaten Sammlung. Sämtliche Geräte, Kabel und Zubehör sind gebraucht und im einwandfreien Zustand. Alles ist stets sehr sorgsam behandelt worden und kommt aus einem tierfreien Nichtraucherhaushalt. Sollte es Einschränkungen geben, werden diese explizit genannt. Folgender Artikel steht hier zum Verkauf: SW1X DACIV - Weltklasse NOS DAC mit TDA 1541 Wandler und Signal Output Transformer (OPT) de-coupled and amplified by Directly Heated Triodes (DHT). Unglaublich natürlicher und analoger Klang. Kann locker mit Lampizator, Audio Note, MSB oder dCS mithalten. Für mich sogar noch flüssiger und involvierender. Einfach mehr Musik. Erstbesitz, 17 Monate jung, mit New Old Stock Röhren und Brass-Panzerholz-Composite-Füßen, Dokumenten, Garantie und OVP. Listenpreis momentan €22.000,- Alle Artikel können gerne zur Probe gehört werden, Standort ist 22765 Hamburg. Da ich alle Artikel als Privatperson verkaufe, sind diese somit unter Ausschluss jeglicher Garantie- oder Gewährleistungsansprüche. Mit der Abgabe eines Gebotes erklären Sie sich mit diesen Bedingungen einverstanden. Bitte schauen Sie auch auf meine anderen Auktion. SW1X DAC 4, Innuos Zenith MK3, Innuos Phoenix NET, Abbas Esoteric Audio USB to SPDIF Wandler, 300B Lundahl Vollverstärker, diverse Kabel usw, auch auf Audio Markt Ich empfehle, aufgrund der Empfindlichkeit mancher Geräte, die Abholung. Sollte ein Versand gewünscht sein, werde ich selbstverständlich den entsprechenden Artikel sorgfältig verpacken. International bidders please ask for shipping quotes and paypal fees.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

RARE 70s Early Audio Note Kondo AN-S3 MC step up trans for all carts SILVER WIRE.This is one of the first product of master Kondo, founder of AudioNote Japan, the real AudioNote. This is handmade wiring by master Kondor, wire is pure silver. Input impedance is 3,10,40 ohm that help you use all cartridges in markets. Perfect working condition. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Ich verkaufe Audio Equipment aus meiner privaten Sammlung. Sämtliche Geräte, Kabel und Zubehör sind gebraucht und im einwandfreien Zustand. Alles ist stets sehr sorgsam behandelt worden und kommt aus einem tierfreien Nichtraucherhaushalt. Sollte es Einschränkungen geben, werden diese explizit genannt. Folgender Artikel steht hier zum Verkauf: SW1X DACIV - Weltklasse NOS DAC mit TDA 1541 Wandler und Signal Output Transformer (OPT) de-coupled and amplified by Directly Heated Triodes (DHT). Unglaublich natürlicher und analoger Klang. Kann locker mit Lampizator, Audio Note, MSB oder dCS mithalten. Für mich sogar noch flüssiger und involvierender. Einfach mehr Musik. Erstbesitz, 17 Monate jung, mit New Old Stock Röhren und Brass-Panzerholz-Composite-Füßen, Dokumenten, Garantie und OVP. Listenpreis momentan €22.000,- Alle Artikel können gerne zur Probe gehört werden, Standort ist 22765 Hamburg. Da ich alle Artikel als Privatperson verkaufe, sind diese somit unter Ausschluss jeglicher Garantie- oder Gewährleistungsansprüche. Mit der Abgabe eines Gebotes erklären Sie sich mit diesen Bedingungen einverstanden. Bitte schauen Sie auch auf meine anderen Auktion. SW1X DAC 4, Innuos Zenith MK3, Innuos Phoenix NET, Abbas Esoteric Audio USB to SPDIF Wandler, 300B Lundahl Vollverstärker, diverse Kabel usw, auch auf Audio Markt Ich empfehle, aufgrund der Empfindlichkeit mancher Geräte, die Abholung. Sollte ein Versand gewünscht sein, werde ich selbstverständlich den entsprechenden Artikel sorgfältig verpacken. International bidders please ask for shipping quotes and paypal fees.

Audio Note Japan early AN B yellow Speaker Cables, 2 x 3m stereo pair.The item pictured is the actual item for sale.

Audio Note Japan KONDO NF KSL-LPz Reinsilber 8 Adern - 2x 0,5 Meter inklusive KONDO-Cinch-Steckern - 2.200 Euro Neupreis.(4.400 Euro NP laut AN Japan Kondo-Preisliste 2011: für 1-Meter-Paar-Stereo). KSL-LPz Referenz NF-Verbindungskabel Das von KONDO handgefertigte Top-Kabel KSL-LPz mit dem doppelten Leiter-Querschnitt. 36 Litzen aus 99,99%igem Silber x 8 Adern Abschirmkabel mit 0,09 mm Durchmesser, insgesamt 288 Litzen aus reinem Silber pro Kanal. Ohne Gebrauchsspuren, tadelloser Zustand - beim Händler fertig konfektioniert gekauft, wie abgebildet: siehe Fotos. ... Fotos und Beschreibungen der eingestellten Waren zeigen die zu verkaufenden Artikel. Kein Originalkarton, keine Rechnung mehr vorhanden, wird sehr gut verpackt versendet. Es handelt sich um Originalware. ... Ich verkaufe stets mit bestem Wissen und Gewissen. ... Versand innerhalb Deutschlands: DHL-Paket 7 Euro.Internationaler DHL-Versand auch Anfrage!... Hinweise:Ich habe 20 km Anfahrt zu der nächstmöglichen Postfiliale - berechne trotzdem lediglich den Schalterpreis für ein versichertes DHL-Paket: 7,00 Euro.Das ist auch der Grund meiner Bearbeitungszeit von 7 Werktagen -> ALLERDINGS VERSUCHE ICH DIESE AUF MAX. 5 WERKTAGE ZU BESCHRÄNKEN! Privatverkauf: keine Garantie, keine Gewährleistung, keine Rücknahme, keine Erstattung, keine Teilerstattung, keine Verantwortung für Transportschäden. Der Markenname ist Eigentum des Rechteinhabers: wird hier nur verwendet, weil er Bestandteil des Produktes ist und die Qualität kennzeichnet.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

For sale XLR cable Audio Note Sogon 50 Strand, 90cm. lenght. Very good conditions and perfect working order. Worhout original box. Thanks. Dettagli La leggenda... Le nostre interconnessioni rappresentano la migliore scelta possibile sia per le interconnessioni stereo analogiche che per le interconnessioni digitali tra un trasporto CD e un DAC. Poiché ogni cavo è un doppino intrecciato schermato, quadruplo intrecciato schermato o esagono intrecciato schermato, possono essere configurati per l'uso con connessione single ended/RCA o bilanciata/XLR. Forniamo tutto l'argento utilizzato nei nostri cavi da un'unica fonte, contribuendo a garantire un livello costante di qualità e purezza. Dobbiamo acquistare grandi quantità all'ingrosso, il che significa che di solito deteniamo quella che è di gran lunga la più grande quantità di lingotti d'argento nell'industria audio! Tutto questo argento è disegnato su misura in base ai nostri specifici requisiti di calibro, quindi rivestito in una varietà di polimeri dielettrici a seconda dell'applicazione per cui è progettato il particolare cavo. Viene quindi trasportato all'impianto di produzione dei cavi dove viene trasformato nella nostra vasta gamma di fili e cavi. Tutto per noi e nessun altro. ?Details The Legend... Our Interconnects represent the finest possible choice for both analogue Stereo interconnects and also Digital interconnects between a CD Transport and DAC. As each cable is either a shielded twisted pair, shielded twisted quad or shielded twisted hex design, they can be configured for use with either single ended / RCA connection or balanced / XLR. We source all of the Silver used in our cables from a single source, helping to ensure a consistent level of quality and purity. We have to buy large quantities in bulk, meaning that we usually hold what is by far the largest quantity of Silver Bullion in the Audio Industry! All of this Silver is custom drawn to our specific gauge requirements, then coated in a variety of dielectric polymer depending on the application the particular cable is design for. It is then transported to the cable production facility where it is transformed into our extensive range of wires and cables. All for us, and no one else.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

AUDIO NOTE JAPAN KONDO M7 TUBE SILVER SOUND. With extremereluctance (times are changing) I am considering selling jewel of my system.I think this is anabsolutely unique opportunity and as faras I know (and I aman audiophile since the 80s!)According to manyenthusiasts, this is the best soundingAudio Note Kondo M7preamplifier with tube phonoPresident of thecompany and masterfully directed its production.The devices are inabsolutely exceptional and aestheticsonic conditions asshown in the photos, kept in a maniacal way. I rated 8/10 in a absolutelyprudently way and only for age. Pre iseuropean 220V-240V.Shipping costs willbe calculated exactly according to thelocation of thebuyer. Shipping possible all over the world, an extra resistant Soon I will uploadmore photos. thanks! Paypal pls add 3%

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf